Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Wanna know what things weigh?

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Wanna know what things weigh? by 86GT3.4DOHC
Started on: 10-08-2004 01:29 AM
Replies: 19
Last post by: 86GT3.4DOHC on 11-12-2004 02:25 AM
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-08-2004 01:29 AM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
Ive got my whole car tore down darn near to a bare frame. Its go the drivetrain, guage cluster, a seat and a headlight still on it. So While Ive got all these parts off Im wieghing themsince I keep seeing all these "How can I cut wieght" Threads Heres what I got tonight

Interior
88 drivers side carpet: 13
86 Drivers carpet: (the 86 has diffrrent padding)15
Center console (piece with glove box) 10
Dash 86 w/ speakers 16
steering wheel (base coupe) 3
Guage cluster w/ surround, no switches 5
full sup setup(w/wiring) 4
Base radio 3
Aux guage cluster 1
interior door pannels (each) 4.5
2 speaker covers, kickpannel, 2 arm rests 5.5
Seat belt 3 lbs
Seat (each) 37
trunk carpet 6lbs ??
rear carpet (behind the headrests) 2
B pillar covers (each) 1.5
center console skeleton 1

Frame compnets
84-86 headlights (each) 8
87-88 Gas tank (no sending unit) 14
plastic spare tire well piece 4
radiator support/fan/ac ?evaporator? 15
V6 radiator 6.5
wiper motor 2.5
Inner wheel wells (each) 2
Brake Master cyl 3
Front Coil Spring (GT) 6
Front spindle with caliper bracket/ rotor assy 20
rear rotor 7
Front pass caliper 3
Swaybar (front 86) 9
86 Rack w/ tie rods/ steering linkage 17
Fully loaded doors w/pw/pl +50 (scale only goes to 50 would estamate 75lbs+

Engine related
Upper plenum 6
Full V6 exaust with cat delete 25
cruise solieoid/ resivor tank 2.5
Ac lines from compressor to frame lines 1
Engine blower fan 3.5

Body related
GT taillights (each) 4
Driver Manual Mirror 1
Drivers Fender (non GT) 2.5
Front bumper support 3
Rear Bumper support 1
GT inner 1/4 surrounds (black pieces, each) 1


Thats all I got tonight, feel free to make requests, I'll start adding body pannels as they come back from paint. +'s are appreciated if this is helpful

IP: Logged
PFF
System Bot
VTfiero
Member
Posts: 196
From:
Registered: Jan 2004


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-08-2004 02:01 AM Click Here to See the Profile for VTfieroSend a Private Message to VTfieroDirect Link to This Post
Cool!!

one + from me!

Interesting info, once your done posting I'm saving it all for sure!

IP: Logged
RickN
Member
Posts: 2891
From: INDY, USA
Registered: Feb 2004


Feedback score: (2)
Leave feedback





Total ratings: 72
Rate this member

Report this Post10-08-2004 02:06 AM Click Here to See the Profile for RickNSend a Private Message to RickNDirect Link to This Post
Yes, very cool!

------------------
RickN
White 88GT 5spd
White 85GT Auto

IP: Logged
paulcal
Member
Posts: 2608
From: Jacksonville, Fl
Registered: Oct 2002


Feedback score: (1)
Leave feedback





Total ratings: 96
Rate this member

Report this Post10-08-2004 07:04 AM Click Here to See the Profile for paulcalSend a Private Message to paulcalDirect Link to This Post
If it has an auto tranny, I'd like to know it's weight.

Thanks

------------------

AIM-jaxpac257
Proud member of the "No Bar" Brigade.

IP: Logged
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-09-2004 08:34 AM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
Sorry no auto
EDIT to add:
RearTaillight support 4
Rear steel bumper 9.5
IP: Logged
bryson
Member
Posts: 737
From: Mt. Pleasant, SC, USA
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-09-2004 09:11 AM Click Here to See the Profile for brysonSend a Private Message to brysonDirect Link to This Post
Is that weight for both of the doors or per door? Thanks,
--Bryson
IP: Logged
82-T/A [At Work]
Member
Posts: 24030
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 200
Rate this member

Report this Post10-09-2004 04:32 PM Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Direct Link to This Post
Hey, pretty cool! We were just talking about this a few days ago on the A/C removal....

I guess with those weights, plus all the other A/C parts (compressor, air-box and stuff), I figure another 25 pounds? (is that safe to say?) so a total of 40 pounds for the A/C delete??

------------------
Todd,
2002 Ford Crown Victoria LX
1997 Pontiac Grand Am GT
1987 Pontiac Fiero SE / V6 5-Speed
1987 Pontiac Fiero SE / V6 (3.2L) Auto
1984 Pontiac Fiero 2m4 SE
1981 Pontiac TransAm (sbc 350)
1973 Volkswagen Type-2 Transporter

IP: Logged
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-10-2004 01:51 AM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
The 15 pounds was probably mostly the fan. If I get time I'll break it down and measure them seperately.

Its gonna be a little while before I get much more on here, but as I put it back together im gonna keep weighing parts

IP: Logged
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-11-2004 01:41 AM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
Full steering colum with H style wheel 15
Auto trans selector cable 1
IP: Logged
tesmith66
Member
Posts: 7355
From: Jerseyville, IL
Registered: Sep 2001


Feedback score: (3)
Leave feedback





Total ratings: 135
Rate this member

Report this Post10-11-2004 09:10 AM Click Here to See the Profile for tesmith66Send a Private Message to tesmith66Direct Link to This Post
I just weighed an empty 2.8 block for shipping: 110 lbs

------------------
1986 SE 350 V8

IP: Logged
fieroX
Member
Posts: 5234
From: wichita, Ks
Registered: Oct 2001


Feedback score:    (14)
Leave feedback





Total ratings: 372
Rate this member

Report this Post10-11-2004 01:02 PM Click Here to See the Profile for fieroXSend a Private Message to fieroXDirect Link to This Post
Ill add to this list, this thread is kinda interesting.


door shell, no glass or skin (has power locks and windows) : 60lbs

door glass : 9 lbs

door skin : 6 lbs

3800 SC block 124 lbs

IP: Logged
PFF
System Bot
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-11-2004 05:26 PM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
Hey thius is my thread
J/K
Im still waiting on more parts to weigh
IP: Logged
Mr. Pat
Member
Posts: 1860
From: Melbourne, VIC Australia
Registered: Apr 2003


Feedback score: N/A
Leave feedback





Total ratings: 76
Rate this member

Report this Post10-11-2004 06:20 PM Click Here to See the Profile for Mr. PatClick Here to visit Mr. Pat's HomePageSend a Private Message to Mr. PatDirect Link to This Post
Could youpossibly weigh a deck with the wing if you have it, and all the mounting hadware.

Thanks mate.

IP: Logged
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post10-11-2004 10:16 PM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
All body pannels will be weighed as they come back from paint.
IP: Logged
FieroReinke
Member
Posts: 1065
From: St James, MO
Registered: Feb 2003


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-11-2004 11:30 PM Click Here to See the Profile for FieroReinkeSend a Private Message to FieroReinkeDirect Link to This Post
You posting this thread made me think about the 3.4 TDC engine in my garage that I am rebuilding. So I went out and weighed some items from it.

The block weighs 106 lbs
The heads (each) weigh 21 lbs
The cam carriers (each) with cams weigh 41 lbs
The front cover weighs 17 lbs
The intake weighs 17 lbs.

------------------
Chris

IP: Logged
Mastermind
Member
Posts: 1396
From: Chicago, 4.9 IL
Registered: Apr 2002


Feedback score: N/A
Leave feedback





Total ratings: 207
User Banned

Report this Post10-12-2004 02:49 AM Click Here to See the Profile for MastermindSend a Private Message to MastermindDirect Link to This Post
 
quote
Originally posted by 86GT3.4DOHC:

Ive got my whole car tore down darn near to a bare frame. Its go the drivetrain, guage cluster, a seat and a headlight still on it. So While Ive got all these parts off Im wieghing themsince I keep seeing all these "How can I cut wieght" Threads Heres what I got tonight

Interior
88 drivers side carpet: 13
86 Drivers carpet: (the 86 has diffrrent padding)15
Center console (piece with glove box) 10
Dash 86 w/ speakers 16
steering wheel (base coupe) 3
Guage cluster w/ surround, no switches 5
full sup setup(w/wiring) 4
Base radio 3
Aux guage cluster 1
interior door pannels (each) 4.5
2 speaker covers, kickpannel, 2 arm rests 5.5
Seat belt 3 lbs
Seat (each) 37
trunk carpet 6lbs ??
rear carpet (behind the headrests) 2
B pillar covers (each) 1.5
center console skeleton 1

Frame compnets
84-86 headlights (each) 8
87-88 Gas tank (no sending unit) 14
plastic spare tire well piece 4
radiator support/fan/ac ?evaporator? 15
V6 radiator 6.5
wiper motor 2.5
Inner wheel wells (each) 2
Brake Master cyl 3
Front Coil Spring (GT) 6
Front spindle with caliper bracket/ rotor assy 20
rear rotor 7
Front pass caliper 3
Swaybar (front 86) 9
86 Rack w/ tie rods/ steering linkage 17
Fully loaded doors w/pw/pl +50 (scale only goes to 50 would estamate 75lbs+

Engine related
Upper plenum 6
Full V6 exaust with cat delete 25
cruise solieoid/ resivor tank 2.5
Ac lines from compressor to frame lines 1
Engine blower fan 3.5

Body related
GT taillights (each) 4
Driver Manual Mirror 1
Drivers Fender (non GT) 2.5
Front bumper support 3
Rear Bumper support 1
GT inner 1/4 surrounds (black pieces, each) 1


Thats all I got tonight, feel free to make requests, I'll start adding body pannels as they come back from paint. +'s are appreciated if this is helpful


So how much does a stock honeycomb wheel weight?

IP: Logged
vse1fiero@cox.net
Member
Posts: 278
From: Carmel Valley, CA
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-23-2004 08:43 PM Click Here to See the Profile for vse1fiero@cox.netSend a Private Message to vse1fiero@cox.netDirect Link to This Post
 
quote
Originally posted by Mastermind:

So how much does a stock honeycomb wheel weight?

Approximately 20lbs.

IP: Logged
Kento
Member
Posts: 4218
From: Beautifull Winston Salem NC
Registered: Jun 2003


Feedback score: (2)
Leave feedback





Total ratings: 131
Rate this member

Report this Post10-23-2004 08:57 PM Click Here to See the Profile for KentoSend a Private Message to KentoDirect Link to This Post
 
quote
Originally posted by Mastermind:
So how much does a stock honeycomb wheel weight?

OFF 86 GT, Grey, no tire, no wheel weights, With Valve Stem 17lb's
Turbofin 5 Spoke
OFF 86 SE No tire, No Wheel Weights, With Valve Stem 14lb's

------------------
4.9 Caddy in Garage! Car in Driveway! ACK!

****************************************
http://home.cfl.rr.com/fierose
Central Florida Fieros
http://www.centralfloridafieros.org

IP: Logged
Spyhunter
Member
Posts: 1254
From: San Francisco, CA
Registered: Feb 2002


Feedback score: N/A
Leave feedback





Total ratings: 86
Rate this member

Report this Post10-24-2004 07:06 PM Click Here to See the Profile for SpyhunterSend a Private Message to SpyhunterDirect Link to This Post
Good thread! keep up the weighing!

------------------

Black '87 GT Auto - Daily Driver & Autocrosser
Eibach springs, Koni shocks, 15" Kosei K1s, Kumho Ecsta V700s, poly bushings, rear swaybar, front mount battery, MSD ignition, shift-kit, custom intake scoop..

IP: Logged
86GT3.4DOHC
Member
Posts: 10007
From: Marion Ohio
Registered: Apr 2004


Feedback score: N/A
Leave feedback





Total ratings: 306
Rate this member

Report this Post11-12-2004 02:25 AM Click Here to See the Profile for 86GT3.4DOHCSend a Private Message to 86GT3.4DOHCDirect Link to This Post
Well heres a hell of a suprise. My car almost fully stripped weights 2200 !!! 860 front 1340 rear. I cant believe it. This is all thats on the car right now.

Basicaly just a frame, seat, DOHC/5spd and windshiled.

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock