On the '86 2.8, is there a little wiring harness that connects the distributor and the ignition coil? I got the harness used, and I'm not sure if there is supposed to be one on, there, if there is a seperate harness, or if it even has one. All I know is, there is an open connection on the distributor, and on on the coil. The question is, what plugs into them if anything? If there is a connection between them, does anyone have one? Cash in hand...
Nick

Its one little independant harness that goes from the dist to the coil. I believe the Fiero store sells brand new ones. You can also find them at the junkyard. They're only about 6 inches long.

Fiero ones are hard to find, but the S-10 is the same except a tad longer, look for S-10s with the 2.8.

JazzMan

This is a picture of the harness The Fiero store sells $45.00

A little hard to see everything but maybe this will help:
one of the wires is broken off in these pictures.....

------------------

88GT/Auto/Beechwood Leather/SunRoof/Wing/JVC-CD-Sub-Woofer/225/45/17 Michelin Pilots/All Opts Ex.T-Tops

<<< <<< Pix of my GT / ** Pix of my Formula** / Pix of my Vettes >>> >>>
*** *** *** *** *** * "If you appreciate my contribution, please rate me. Thanks"* *** *** *** *** ***

[This message has been edited by 2000RagTop (edited 11-30-2005).]