I was wondering if anyone has them just lying around ? I'm looking for all the numbers as far as intake valve opening/closing degree's,lobe separation angles and so on. I am wanting to do some desktop dyno experimenting and need all these numbers to be as acurate as possible. Thanks in advance.

------------------
HARDCORE SBC CRONIE AND PROUD OF IT ! GOT TQ ?

[This message has been edited by FIEROPHREK (edited 03-14-2006).]

Go to Crane Cams website and look up all the cams for the 2.8L:
www.cranecams.com
Then select a cam like the H260
and view the cam card.

Most aftermarket camshaft companies allow you to print out the cam card on-line.

It looks like this:

Also, If you are using it for Desktop Dyno I have the DD2000 camdisk.
Just tell me what cam or cams you want and I can Email them to you already in the DD format.

[This message has been edited by Oreif (edited 03-14-2006).]

Oreif { Dave ]? Do you have the cam specs for a fed mogal {TRW,Sealed Power} #CS192R ? Yuo all could run my numbers if you like.

------------------
85 GT 3.4
Auto 3.08
14.9 @ 90 1.9 60"

quote Originally posted by Lilchief: Oreif { Dave ]? Do you have the cam specs for a fed mogal {TRW,Sealed Power} #CS192R ? Yuo all could run my numbers if you like.

No I don't. I looked thru the list and all I could find was E192-111R which is an Erson cam for a 4.3L.
Do you have any more linfo like lift? I could see if they have the same cam listed under a different manufacturer.

[This message has been edited by Oreif (edited 03-14-2006).]

All I have is Lift I .443/ E .465, 214/224,288/298, LC 112. The Fiero Store or somebody sold this at one time, don't remember who. It would be nice to know the opening/closing degrees of both valves

------------------
85 GT 3.4
Auto 3.08
14.9 @ 90 1.9 60"

Hey orief + for ya ,oops already had one, thanks for that info ! Where did you pick up the DD camdisk? I would like to have a copy onhand .

------------------
HARDCORE SBC CRONIE AND PROUD OF IT ! GOT TQ ?

[This message has been edited by FIEROPHREK (edited 03-15-2006).]

quote Originally posted by FIEROPHREK: Hey orief + for ya ,oops already had one, thanks for that info ! Where did you pick up the DD camdisk? I would like to have a copy onhand .

It came with the set I bought. I got the Desktop Dyno 2000, Desktop Drag 2000, and the CamDisk as a package.

Thanks Orief + for you

------------------
85 GT 3.4
Auto 3.08
14.9 @ 90 1.9 60"

http://www.engine-parts.com/GMV6/28camspecs.html

they sell several cams, and have the specs on them