Looking for the wire diagram/info to hook up the brights so when I hit them all beams are lit

*bump*

It does not work that way, you will need a relay system that will feed power to both sets of lights, like a plow truck setup or something close to that, i belive jegs sells something for it

I could've swore it did? theres a box/relay with some more wiring to do that. Been awhile since I peaked up front, going to have to being how my IC pump isn't working.

------------------
3800 SC/IC Formula whines more than your girl...
98 GTP - N* TB, 3.4 MPS, 1.95 rockers, SS Headers, Exhaust, GXP Susp.

All four should come on if the power to the relay in the driver's side harness is present. Just fixed the same problem on another car with my lights at the Daytona show last weekend. His relay had filled with water and corroded due to not being mounted as described in my instructions. Check the fuse in the fuse holder should have voltage on both sides. If it does listen for the relay clicking when you turn on the high beams. If it doesn't click it probably has the same problem with corrosion. The relay has to be mounted with the connector down so water can't collect inside. If you still have problems after checking the items I just listed call me at 352-274-0549. If you call during the day you may have to leave a message because the reception at work is poor. I think you should be able to find a relay at most part stores. If you can't call me.
Thanks!
Kris

[This message has been edited by kmunson56 (edited 03-31-2008).]