I am at the point of putting the wring harness on my engine.

1. Should I put on the harness first then put the engine in the car?
or
2. Should i put the engine in the car then put the harness on?

Put the harness on the engine before you put it in the car.

---
edit to piggy back on the following post

Assuming you dropped the cradle, then you should try to fully assemble the cradle before putting it back into the car. Anything you can do before it is installed in the engine compartment will be easier outside the car. That includes exhaust, and even attaching the engine side of the radiator hoses.

[This message has been edited by phonedawgz (edited 12-12-2012).]

I didn't when I did my swap and its not as easy to get to places or even see them when it is in the car.

Alright thank you guys.

Could you also show me how the wiring harness wraps arround the engine?

Here's a couple of pics I snapped today. Hope they help.

excellent photos, thanks for posting I can use these as well.

Wow thanks for those pictures solved my problems and solved problems i didn't know i had.

Thank you very much for uploading these.