Here's a few pictures that I stilled off of my video footage of the Waterford Track day for the 20th Anniversary.
If you want any higher res. pics, I can email them to ya:

First Lap of the first set:

Corner Shot:

Purple Reign, Fiero Addiction(?), and ?:

Purple Reign and Yello86Se:

Yello86se In Line:

------------------

Chris_Oslo_Nelson@hotmail.com

One More of Purple Reign

Gotta love the 19" rims!!!

Thanks Oslo.........any way you can get video on the forum ?

quote Originally posted by Oslo: Here's a few pictures that I stilled off of my video footage of the Waterford Track day for the 20th Anniversary. If you want any higher res. pics, I can email them to ya: Purple Reign, Fiero Addiction(?), and ?:

Yep, thats me, Fiero Addiction, holding up those 3800 guys. Sorry. Purple Reign then Loyde from ZZPerformance is behind me.

------------------

85 SE 2M6 "Fiero Addiction"
85 SE SC3800 Series II 5-Speed

[This message has been edited by Fiero38SC (edited 07-23-2003).]

Loyde is from zzperformance ? The same loyde on the CFOGI board that I thought was from Texas?

quote Originally posted by PURPLE REIGN: Loyde is from zzperformance ? The same loyde on the CFOGI board that I thought was from Texas?

Thats what he told me. Yes, he is from Texas. But I just looked at the website and they are in MI. So, I don't know the whole story.

Yep... that's Loyde (NTFC president, CFOG Director). No decklid. Not really from zzperformance, but it is my understanding that he is "in" and that motor he was running was built up using a bunch of zzp parts.

Yea, Oslo, get some of the video on here, especially the video of the way home when we were playing around. If you don't know how, find out how, i wanna see it from somewhere other than my car.

Eric

EDIT: I dont know how to type
------------------
88 Coupe, Duke I4, 5 Speed

[This message has been edited by Racingman24 (edited 07-23-2003).]

Great Pix oslo..Cant wait for the video

oslo got any pics of that console box I made you?? if so can you make a post showing that off and your interior?? I want to see it, lol pm or email me the link if you put some pics up, thanks agian Chris, it was nice to finally meet you at the 20th!

Kent

------------------
check out the site, www.pontiacsound.com

I missed the spin out, so just waited for the tow truck.

The other drivers missed the GT and the GT didn't hit the wall.

[This message has been edited by Old Lar (edited 07-23-2003).]

THAT was an awesome recovery though..........nice driving ..........I'm assuming that was your car ?

I can't put video up on the forum. First of all I don't know how to get it onto the computer (Windows XP is a pain for that stuff...), and secondly even if I did I don't have any hosting space anywhere. Anybody that does have web space, contact me.

Mmmmmm, I like this shot:

------------------

Now over 400 pics of our 18 Fieros:
http://www.cardomain.com/id/fiero5

quote Originally posted by blakeinspace: Yep... that's Loyde (NTFC president, CFOG Director). No decklid. Not really from zzperformance, but it is my understanding that he is "in" and that motor he was running was built up using a bunch of zzp parts.

Something like that. I found him here:

quote Originally posted by FastFieros: Woo Hoo! That most likely is closer to a 20K build up. I have $14K in my engine and electronics. I just put my PRJ rails on last night. Got the IC and Stage 4 installed as well. You will be leaning to that ICCU feature with that DHP before long. Loyde

quote Originally posted by Fiero5: Mmmmmm, I like this shot: I've allways wondered what kind of car they would use to pace the FIEROS lol. Thats a beautiful picture. Who spun out?

------------------

My 85 Fiero On CarDomain.Com
Visit New Mexico Fiero's

I am from Dallas Texas area (PrinceTon).

I have sponsered parts form ZZPerformance.

ZZP provides very good customer service, and I look for this instead of price when it comes to custom performance parts.

The ICCU I had for the DHP PCM was bad at the 20th. I had to run a 3.4 pully instead of the 2.8 that goes with the Intercooler setup. Desprite the decrease in boost, I was able to bent a WCF front engine mount down the middle at Milan Dragway. Shifted the engine and trans a quarter inch. ZZP next day aired me a ICCU replacement, but I did not take the time to install it since the engine was running fine on a DHP V1 I tweaked with resistors. Most likely with this setup I am at 360HP and with the ICCU should be 400HP.

I purchased Bill Levins lowering trans mounts at the 20th. I will be removing the powertrain to install these. I should be visiting the dyno in 3 weeks.

List of mods for this engine at > http://www.fastfieros.com/carsavailable/88GT5speed.htm

Loyde

This would be me waiting for the tow truck for the 2nd time. Im looking for video of the spin if anyone has it mail me.
It wouldnt start after the spin because it was flooded.

[QUOTE]Originally posted by Old Lar:

------------------
Scott
86GT 3.4 turbo

quote Originally posted by FastFieros: Blake, Are you saying I am "deckless" ... See you saturday at the NTFC meeting.

Dangit Loyde... I forgot, Saturday is my birthday... and I might get stuck doing family hoopla. I will try to make it. If my family really loved me they would go with me to Pop's.