Looking for some pics of custom interiors installed and finished. Like the PISA euro dash, and archies interior kit. Any other custom interior kits that can be purchased also, try and include a website for others.
IP: Logged
10:36 AM
PFF
System Bot
DanFiero Member
Posts: 2815 From: Cedar Rapids, Iowa Registered: Jul 2002
There is the firebird interior. It's not yet offered as a kit, but one of the best junkyard upgrades you can get. For about a few hundred in parts, (and hundreds of hours) you can have this:
------------------ If you find my advice useful, then please give me a positive rating, thanks... 1988 GT (Firebird Interior),1988 Coupe (Daily Driver), 1985 SE (Project Car), 1985 Coupe (parts car), Firebird Interior Installation Website
i do not mean to disapoint you but if u mean bolt right in u will need to upholster the dash kit as it comes in fiberglass plus installation u are looking at alot of $$$ for a dash kit u will most likely be looking at a 4digit dash witch as said above for a few hundred and your time u can accomplish someting nice but go for wat u want dosnt bother me im not the one payin
I offer an interior package that replaces your original door panels and center console and the dash goes over your original dash. I don't have these pics up on my site yet because we are reduing our website www.b-bspyder.com. here are some pics of our interior package. Bill
I like the dash, but I think you need a better upholstry shop!! The seams are not straight, and there are several wrinkles, at least it looks that way in the pics.
Otherwise, I kinda like it. How much?
IP: Logged
11:32 PM
Feb 22nd, 2004
PaulJK Member
Posts: 6638 From: Los Angeles Registered: Oct 2001
Hey Bill, i have Rodney's short shifter but sure would like to have a thin chrome shaft like you have in your pics. A thinner shaft / rod would give more room when using the shifter gate. You have any ideas how to adapt a thin rod to a rodney short shifter (or can u do it 4 me) ?
IP: Logged
06:09 AM
Feb 23rd, 2004
PaulJK Member
Posts: 6638 From: Los Angeles Registered: Oct 2001
Can't post from here, (at work), but will show you Mr. Mike's dash kit when I get home. Kevin
------------------ 85 Fiero-based ASPP GT-40 MarkII. 3800 S/C, Auto, Held suspension all around with 2" drop spindles and sport fr. end. RCC bump-steer correction. Mr. Mike's interior.
IP: Logged
12:04 PM
B&BSpyder Member
Posts: 104 From: Clearwater, FL Registered: Oct 2003
I like the dash, but I think you need a better upholstry shop!! The seams are not straight, and there are several wrinkles, at least it looks that way in the pics.
Otherwise, I kinda like it. How much?
It is the pics, kit is $1000.00 with out upholstry. Bill
[This message has been edited by B&BSpyder (edited 02-24-2004).]
IP: Logged
06:53 PM
PFF
System Bot
B&BSpyder Member
Posts: 104 From: Clearwater, FL Registered: Oct 2003
Hey Bill, i have Rodney's short shifter but sure would like to have a thin chrome shaft like you have in your pics. A thinner shaft / rod would give more room when using the shifter gate. You have any ideas how to adapt a thin rod to a rodney short shifter (or can u do it 4 me) ?
It can probably be done but I have not seen one of Rodneys shifters. I have access to a metal fabrication shop so we can make pretty much anything you want. Bill
IP: Logged
06:57 PM
PaulJK Member
Posts: 6638 From: Los Angeles Registered: Oct 2001
Dash, leather seat covers and most of the interior is Mr. Mike's. Kevin
------------------ 85 Fiero-based ASPP GT-40 MarkII. 3800 S/C, Auto, Held suspension all around with 2" drop spindles and sport fr. end. RCC bump-steer correction. Mr. Mike's interior.
[This message has been edited by GT40 Kit 3.8 SC (edited 02-25-2004).]
