BTW, this is with 90 degree temps and he had his street exhaust on. Since then he has made a race only exhaust and turned in 114mph trap speeds with just the swap. He did spin a bit too.
IP: Logged
10:52 AM
Mr. Pat Member
Posts: 1860 From: Melbourne, VIC Australia Registered: Apr 2003
I dont believe it. Its photoshopped. No way a SBC can be beat by a V6!!!!!
------------------ 1986 GT, LT1/4T60E http://hometown.aol.com/ptfiero/index.html On the forum https://www.fiero.nl/forum/Forum2/HTML/045554.html more in depth look http://dtcc.cz28.com/LT1build/index.htm
IP: Logged
10:53 AM
SOULCRUSHER Member
Posts: 1012 From: Waldorf, MD Registered: May 2004
thats sweet... ive got a friend thats putting a LS1 into his 1990 RX-7 GTU... its gonna scream, i just hope he can control it. those kits are CHEAP too... you can get them for about 500 bucks and all you need is the motor and trans.
R-Click, save target as, save it to desktop (or wherever)...It should show up as a valid .WMV file on the desktop...(I don't know why it says it's saving itself as a .txt, but it works for me)..
Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.
------------------ 1986 GT, LT1/4T60E http://hometown.aol.com/ptfiero/index.html On the forum https://www.fiero.nl/forum/Forum2/HTML/045554.html more in depth look http://dtcc.cz28.com/LT1build/index.htm
IP: Logged
01:50 PM
PFF
System Bot
California Kid Member
Posts: 9541 From: Metro Detroit Area, Michigan Registered: Jul 2001
Real nice run LilDevil, you had the guy wasted by half track, looks like he was starting to pull hard near the finish.
Video did download and play even though it appeared to be saving as a text file, thanks Brad for the suggestion to let it load that way.
Mr. Pat, the only thing you should worry about is talking to Tech Support to be sure you get the right set for your engine. Other than that you might get tired of the noise It is a more precise timing setup!!!
Note to others posting help on downloading video, if you could edit your post to delete 'help' to clear up his post, it would be appreciated.
Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.
i've heard of some people having problems with the timing gear sets due to harmonic imbalance caused at higher rpms. its hard on the valvetrain because of the vibrations. just something to think about.
------------------ 88 fiero coupe. 2.8/5 spd (last driven sept 02) 90 eclipse. 4g63t, the replacement for displacement
IP: Logged
05:32 PM
California Kid Member
Posts: 9541 From: Metro Detroit Area, Michigan Registered: Jul 2001
i've heard of some people having problems with the timing gear sets due to harmonic imbalance caused at higher rpms. its hard on the valvetrain because of the vibrations. just something to think about.
more vids are on the way....only reason this one was posted was tosee if we could get it to work. On the way will be a bye run with the open exhaust and a vid with me BARELY beating a 240 SX Turbo. Maybe some burnout videos after the upcoming weekend.
IP: Logged
07:26 PM
Vonov Member
Posts: 3745 From: Nashville,TN,USA Registered: May 2004
Great video. these are always welcome on the forum
quote
Originally posted by Mr. Pat:
Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.
Pat, Your not goin to be able to use it most likely. They set off enough noise to give your Knock sensor false readings. Good in a carb'd motor though.
The Dirty Rat Chopped, dropped and just plain NASTY! Choptop Targa #1 383 Stroker MPFI with N2O 1" Drop 3" Chop 11" Brakes 19" Motegi Roja's wrapped in BFGoodrich Gforce T/A KDW-2 rubber RCC Coilover Suspension Updated Jan 21 '04 www.dirtyratracing.org
IP: Logged
05:14 PM
DelawareFiero Member
Posts: 1050 From: Tod vor Schmach!! Registered: Apr 2004
Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.
I'm pretty sure you can't run those with a computer controlled car. It can/will set off the knock sensor. Correct me if I'm wrong - anyone.
IP: Logged
11:06 PM
Oct 27th, 2004
buddycraigg Member
Posts: 13606 From: kansas city, mo Registered: Jul 2002