Its 6.88mb and I'm on dial up. Anyone on MSN or ICQ I can send the vid to?

Its pretty cool

------------------

Buy a fiero, become a mechanic

http://home.mchsi.com/~houseofsakowitz/frstrt.wmv

[This message has been edited by Erik (edited 11-01-2004).]

[This message has been edited by crzyone (edited 11-01-2004).]

[QUOTE]Originally posted by crzyone:
bump

[This message has been edited by Erik (edited 11-01-2004).]

http://home.mchsi.com/~houseofsakowitz/frstrt.wmv

Thanks Erik!

3.4dohc with a 2.5" mandrel bent exhaust system with a magnaflow muffler. Its LOUD! Ordered some resonator tips to try and tame it a bit.

quote Originally posted by crzyone: Thanks Erik! 3.4dohc with a 2.5" mandrel bent exhaust system with a magnaflow muffler. Its LOUD! Ordered some resonator tips to try and tame it a bit.

no prob ..yeah I got two bullets on mine and without the ansa resonator tips its a bit louder than yours...the magnaflow makes a difference

[This message has been edited by Erik (edited 11-01-2004).]

Was this a new or fresh rebuild? Whats with all the smoke?

i think thats condesation... it was at night and the temp as close to the dew point so i hope that was just from it being cool. but SWEET!!!

------------------
'86 Fiero GT

My Fiero XoticRydzMid-Rear Madness

Member of the "Im Tired Of All The Flame Wars" committee ITOATFW

Be Excellent To Each Other" - Bill S. Preston Esquire Ted Theadore Logan

Gotta love that sound. Sounds like it really wants to rev, too.

Smoke looked like condensation to me, as well.

Congrats on a successful project!

Probibly half condensation and half black smoke from running rich. The O2 sensor still needs to be installled. Exhaust shop forgot to make a fitting for the O2... It was cold when I started it, probibly 30*F.

This is a fresh install and first fire up. No idea how long the engine has sat. It was from a 94 GTP that had a street racing accident, last winter I think. They said they had done some work to the motor, I think they may have done the exhaust cam retard, it sounds very cammy/lopy at idle.

quote Originally posted by crzyone: I think they may have done the exhaust cam retard, it sounds very cammy/lopy at idle.

I noticed that.. it may not have even been looking at the O2 that soon after startup.. I think it wa sjust condensate.

Sounds cool. congrats.

------------------
-Chris -
Custom Gun Metal 86 GT 4.9 V8 5spd

Build up tread or MODS w/ Pics

Thanks

Don't suppose there is an easy way to tell if a cam retard has been performed? Any other 3.4tdc people out there think it sounds cammier than normal?

Will I be making more then the factory 210hp with the free flowing exhaust and no accessories?

here is wetpoops 3.4tdc for comparison http://www.cosineaudio.com/fiero/tdcfiero.AVI

I dunno, I'd say his definitly sounds smoother at idle.

Glad to see you got it running. Will I be seeing you in the spring?

Hopefully then I will be driving my Quad 4 Fiero, see if we can take beat the 4.9's in the club on the highway with our reving engines. What is the redline and HP/TQ on that engine? The Quad 4 I have is 7000 according to the donor car, 180HP and 160TQ is what I have found.

------------------

84 Fiero Sport Coupe #1192 :: 86 Fiero Base Coupe :: 84 Chevette CS 4 DoorDetails on my Fiero hereMember of the Edmonto Fiero Club

all I have to say it WOW!

------------------

I had Darth set my rev limiter to 7200rpm.

I will come down to Red Deer in the spring for sure. Already told Tim that we have to line our cars up

Stock this motor has 210hp and 220tq, with my less restrictive intake and exhaust with a cam retard I hope to be around 240 at the crank. Maybe 250 with no accessories? I bought a T3/T4 and an intercooler off of another forum member, we'll see when I find the time to install that as well.

Anybody else with 3.4 TDC videos?...Sound bytes?

quote Originally posted by Silicoan86: Anybody else with 3.4 TDC videos?...Sound bytes?

here is mine
http://home.mchsi.com/~houseofsakowitz/3.4dohc.wav

Here are some others courtesy of DKOV
http://www.gopc.com/F355/Engine/34tdc1.mpg
http://www.gopc.com/F355/Engine/34tdc2.mpg
http://www.gopc.com/F355/Engine/34tdc3.mpg
http://www.gopc.com/F355/Engine/34tdc4.mpg
http://www.gopc.com/F355/Engine/34tdc5.mpg
http://www.gopc.com/F355/Engine/0to70mph.wav

courtesy of Fierobsessed
http://www.dohcfiero.com/Sounds/Dyno%203.4%20dohc.mp3

courtesy of ltlfrari

http://ltlfrari.no-ip.com/Public/3.4dohc.wav

Well after hearing those I'd say something is definitly different about my motor. I will have to get ahold of the guy I bought it from and see if he knows what was done to it. I suspect a cam retard but who knows? Mine sounds like a lopey sbc compared to the high winding V-6 its supposed to sound like.

Man, I love your car. Bet you won't even bump the subs you put in not too long ago with the 3.4 running..

------------------

lol, well atleast they look nice. Nice to listen to something on a long drive, guess I have 2 sound systems now

quote Originally posted by crzyone: Well after hearing those I'd say something is definitly different about my motor. I will have to get ahold of the guy I bought it from and see if he knows what was done to it. I suspect a cam retard but who knows? Mine sounds like a lopey sbc compared to the high winding V-6 its supposed to sound like.

Who knows ..you might have custom grind cams

Don't pay too much atention to mine, it's still runing like garbage and I am pulling the engine AGAIN. Gonna do the cam timing and if that does not fix it I may just shoot the bugger......

------------------
Dave E

www.ltlfrari.com
Visit the NC Fieros website at TarheelFieros.org

The link for Fierobsessed isn't working for me. The rest sound awesome! I gotta start searching for one of these for my car.

Edit: Nevermind, the link just worked.

[This message has been edited by Silicoan86 (edited 11-02-2004).]

quote Originally posted by Erik: Who knows ..you might have custom grind cams

That would be cool I'm going to ask the 60* V-6 board if they can tell by the exhaust sound what has been done to it...