Well... it all started a few weeks ago when i got an e-mail from the WNY yahoo Fiero group.....88 Coupe 5 spd for sale...$600... im want, but am broke! so i ask owner if i can pay bi weekly...says its A-OK well 2+1/2 months later i drive 4 hrs out to see it and transfer title and saw lots of Fieros and LOTS of parts! (I will be there again for the MAFOA swap meet...) love the little duke, dirty, but i see a diamond in the rough. Got it registered and everything today (mon.) then left to pick it up at 1pm On the way my buddy got a speeding ticket 80 in a 65 but i told him id pay half for taking me... But got to the car, put plates and reg. on, and drove away! The difference in suspension in the 88 is amazing! my 86 SE is nowhere near this (and the truck is NO comparison..) the only difficulty i had was 1.Tough going from driving my 5spd truck, to the duke, to used to lotsa torque and ponies... stalled once or twice... 2.Alternator belt DEF needs to be replaced... squeaky MOFO.... First i am going to get her runnin like a champ... i already have roller tip rockers (1.6 i think?) gonna replace wires,plugs,o2 sensor,oil,possibly coolant, all filters, dogbone w/poly, i think need to replace drivers side lock too... key wont open it, but works for pass side?!... i was also surprised to find a PERFECT headliner! (im pretty sure its not origional, but nonetheless looks great!) gotta also replace some interior minors, seat (OBVIOUSLY drivers side...) might just reupholster tho.. seat lever cover thing on pass side and clean her up.... well here are before pics!!! and i will have afters tomorrow! OOOOoo shes so DIRTY!
and her 2nd last night with brothers and sisters...
more tomorrow!
------------------
quote
Originally posted by Jake_Dragon: The rest of your life could be today, I picked the Fiero to drive to work
IP: Logged
12:26 AM
PFF
System Bot
FieroMaster88 Member
Posts: 7680 From: Mattawan, MI Registered: Nov 2000
ok well more pics will be up later tonigh, im on my way to tattoo place again... Today i TOTALLY cleaned it up, then replaced the following.. Plugs Wires O2 sensor Air filter Added ground strap PCV valve
Have fuel filter roller tip rockers
i also wet sanded some of the sun fade off....worked decent, didnt get rid of it but helped....
Seems to be a slight grinding when i start off, may be cv joint?!? and an odd light squeking from back left tire, not brake squeal either, sound like something rubbing rotor/rim?
IP: Logged
08:00 PM
Mar 23rd, 2005
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
AHHHhh had to deal w// a few personal things last night, but car definately grinds 80% of the time when i go in first.. and a slight scraping sound.... DEFINATELY need new clutch pedal. and does anyone know how to get rid of the looseness in a clutch pedal? i make a pic of it later... gotta goto work..
ok boys and girls, here is the clutch pedal problem, 1st picture, is where clutch sits, and begins to engage, second pic shows that i can pysically pull pedal towards me, and it is LOOSE. Its fine where it sits, but it still doesnt seem right, clutch pedals are not loose at the end like that....i really dont know how to attack a clutch problem, so far i bought the new pedal, but pushrod is loose too.... ANYONE?!?!
IP: Logged
07:37 PM
Mar 25th, 2005
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
Ok now i gave her a massive sanding, getting better Installed clutch pedal, feels better but not what i expected,CD player (found out it had aftermarket speakers..),breather filter, replaced alternator, installed horn, new wipers,installed ultimate dog bone, BIG difference.... bought adjustable banjo from rodney dickman and bought some other goodies.... PICS SOON!
IP: Logged
12:59 AM
Apr 4th, 2005
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
left headlight motor gone, so stuck em up.. but car looks good!
i hate snow....
now the squeal is back and worse, i think its a pully but not sure which one, idler? replacement difficulty?
AND WORSE YET!!! went to drive it a MILE home with a bit of snowy slush on the rd..... spun out and hit left rear to the curb!!!!! GRRRRR!!!!! rim has a bad scratch patch, and i REALLY hope nothing get screwed up...
IP: Logged
12:02 AM
PFF
System Bot
vlatus Member
Posts: 394 From: Raleigh, NC USA Registered: Mar 2003
Thats one nice Fiero. And it looks like you have a lot of other nice fieros! How many days did you have to wait in line at the DMVs to register that?
Its good to know there people in WNY with more fieros than Buffalo Auto Wrecking....oh...last summer they had a 88 coupe....but i dont know if its still there
------------------ 85 2m4 Sport Coupe 88 Coupe with T-Tops
well master cylinder is on that was easy, but when i tried to bleed the system, another problem!! slave cylinder has a leak too!!! aaarrrggg!!! o well off to go get a new one tomorrow. also found out the rollertip rockers i have, dont fit, must be for the earlier dukes....well while i had engine apart i cleaned up air filter housing+ a few tubes and will do thermo housing tomorrow... really makes big diff. 1st off,new tools. awesome open end ratchet-wrenches, that are like a socket wrench..
new master and old
new one halfway on
slave cylinder leak...
[This message has been edited by BobadooFunk (edited 04-07-2005).]
IP: Logged
01:26 AM
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
rocker comparison..... too bad i was hopin to put em in....
(yes i took one off and made sure... no fit!) and my baby off the road for a day
well i hope shes runnin tomorrow!!! also gonna do a massive interior cleaning. Does anyone know HOW and WHAT i can use to paint interior panels? (preferably dark blue, but black will work)
IP: Logged
01:32 AM
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
85 Fiero 2m4... where abouts in buffalo are you? i go from here all the way to lake shore for no reason...(so youre not far!) but i went to the lockport DMV 15 minutes tops, AND i renewed my drivers liscense!
IP: Logged
01:46 AM
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
the entire theme of the car will be orange and blue, waiting for nicer weather to paint the exterior.
and a present from my mom...
(and i dont even smoke!)
EDIT: AND MIGHT I ADD!!!!! the window crank... it was such a PITA to remove, i finally broke it off so i could figure it out for the other side. boy do they suck.
[This message has been edited by BobadooFunk (edited 04-08-2005).]
OK. Weeeeeeell quite a bit has happened over the last few days! 1st got my truck stuck! https://www.fiero.nl/forum/Forum6/HTML/032205.html and tried to bleed clutch for 3 days... didnt work. so took it to monroe, well something in clutch area is ded. pressure plate , throwout bearing..sumthin... fork is already engaged (guy showed me and i understood , but have a hard time explaining it online. but simply put, now i gotta do clutch myself. this is going to be fun. (sarcasm!) itd be ok if my truck wasnt stuck either... but its not to bad, itll be up there on big engine repairs ive done. add character and experience and knowledge. LET THE REPAIRS AND PICS BEGIN. ok well tomorrow i begin......
Looking good!! Looks like both of us got a awesome deal on our Number 2 Fieros . I'm doing the same maintence wise. Ordered a bunch of stuff off the fiero store, bought some things at autozone & etc then the fun begins, although I already started some! . Keep up the good work man!
IP: Logged
03:34 AM
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003
well started to take little stuff off...air cleaner s hose thing... batt.... dogbone... and now i dont know wheather to loosen shift cables, or the bracket... anyone?
IP: Logged
11:51 PM
Apr 13th, 2005
BobadooFunk Member
Posts: 5436 From: Pittsburgh PA Registered: Jun 2003