Pennock's Fiero Forum
  General Fiero Chat - Archive
  Quarter window (With window scoop)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Quarter window (With window scoop) by CanadianGT
Started on: 07-10-2006 09:41 PM
Replies: 27
Last post by: F-I-E-R-O on 02-01-2007 11:25 PM
CanadianGT
Member
Posts: 556
From: Toronto, Ontario, Canada
Registered: Mar 2001


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 09:41 PM Click Here to See the Profile for CanadianGTSend a Private Message to CanadianGTDirect Link to This Post
Hi,
Does anyone know who sells the quarter windows for the fastbacks that have a scoop in them with a small window? I looked at the Fiero store's website, who I thought sold them, but they dont seem to show them on there site.
Thanks
Kyle
IP: Logged
PFF
System Bot
fierofierofiero
Member
Posts: 370
From: McAllen, Tx
Registered: Nov 2005


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 09:49 PM Click Here to See the Profile for fierofierofieroSend a Private Message to fierofierofieroDirect Link to This Post
IP: Logged
fierofierofiero
Member
Posts: 370
From: McAllen, Tx
Registered: Nov 2005


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 09:58 PM Click Here to See the Profile for fierofierofieroSend a Private Message to fierofierofieroDirect Link to This Post

fierofierofiero

370 posts
Member since Nov 2005
http://www.fibersmith.net/closeout/images/turbinescoop_big.jpg

These dont look all to hot though. You could paint em I guess.
IP: Logged
CanadianGT
Member
Posts: 556
From: Toronto, Ontario, Canada
Registered: Mar 2001


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 10:01 PM Click Here to See the Profile for CanadianGTSend a Private Message to CanadianGTDirect Link to This Post
Those look good, but I like the ones that have the small little window in them. Do you know if anyone still sells those?
Thanks
Kyle
IP: Logged
Racingman24
Member
Posts: 2304
From: Land of 10,000 Idiots
Registered: Apr 2003


Feedback score: N/A
Leave feedback





Total ratings: 103
Rate this member

Report this Post07-10-2006 10:24 PM Click Here to See the Profile for Racingman24Click Here to visit Racingman24's HomePageSend a Private Message to Racingman24Direct Link to This Post
You talkin' bout these?



Eric

------------------

Used is such a harsh term. . . I perfer "Previously obsessed over" ;)
88 base coupe: Busted again
Wait. . . Did I just say I can't wait to do more work on my Fiero?. . .what, am I retarded?

 
quote
Said by Crazy Dave "You can take Steve out of the trailer park, but you can't take the trailer park out of Steve."

(\__/)
(='.'=) <<<< Cute Bunny.
(")_(")

IP: Logged
fierofierofiero
Member
Posts: 370
From: McAllen, Tx
Registered: Nov 2005


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 10:30 PM Click Here to See the Profile for fierofierofieroSend a Private Message to fierofierofieroDirect Link to This Post
I was snooping around on FieroStore also. I could have sworn thats where they were also. I've googled and googled and I cant find those anymore.
IP: Logged
CanadianGT
Member
Posts: 556
From: Toronto, Ontario, Canada
Registered: Mar 2001


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-10-2006 10:33 PM Click Here to See the Profile for CanadianGTSend a Private Message to CanadianGTDirect Link to This Post
yes, those are exactly what I am looking for!
Dont tell me the Fiero store no longer carrys them.........I finally have the funds to buy them!
IP: Logged
Racingman24
Member
Posts: 2304
From: Land of 10,000 Idiots
Registered: Apr 2003


Feedback score: N/A
Leave feedback





Total ratings: 103
Rate this member

Report this Post07-10-2006 10:43 PM Click Here to See the Profile for Racingman24Click Here to visit Racingman24's HomePageSend a Private Message to Racingman24Direct Link to This Post
The Fiero Store has them.

jk.

PM MsLoriFiero, that's where the above set came from. Not sure if she's still making them, but it's worth a shot.

Eric
IP: Logged
Riceburner98
Member
Posts: 2179
From: Natick, Ma, USA
Registered: Apr 2002


Feedback score:    (10)
Leave feedback





Total ratings: 80
Rate this member

Report this Post07-10-2006 11:04 PM Click Here to See the Profile for Riceburner98Send a Private Message to Riceburner98Direct Link to This Post
Not sure where the ones I have came from, but I wasn't impressed with the overall quality.. Guy had siliconed them on the car, and one of the windows popped out somewhere along the way. I started sanding on one of them to get the lines better, but got sidetracked and lost interest I guess. They would need work (was going to repair some bubbles / cracks in the fiberglass) to make them look good, as well as cutting a new window or 2 from some tinted plexi / lexan, but if anyone wants them I'd sell them for $25 and shipping. (edit -- sold I think..) I think they were the Fiero Store ones, but can't confirm. Last time I looked at the website they were there, but now are gone. Wonder why..? Unfortuntatly I don't have a good picture of them, but you can kinda see one in my sig... I won't be back down to the car 'till next weekend though... Anyway... Don't wanna hijack the thread.. Edit - BTW, MinnGreen's that Racingman posted above look better! The bigger window really helps I think.. I'd use them, but with the Aus scoops and likely a hood scoop, I just thought it was too many scoops on the car.

------------------
Bob Williams
Working on the next 3800 swap.. Missing the working one already!

[This message has been edited by Riceburner98 (edited 07-11-2006).]

IP: Logged
Max The Chainsaw
Member
Posts: 1140
From: Danville, IL
Registered: Oct 2000


Feedback score: N/A
Leave feedback





Total ratings: 71
Rate this member

Report this Post07-10-2006 11:38 PM Click Here to See the Profile for Max The ChainsawClick Here to visit Max The Chainsaw's HomePageSend a Private Message to Max The ChainsawDirect Link to This Post
We got a set from the Fierostore a week ago.

Max
IP: Logged
MinnGreenGT
Member
Posts: 11545
From: Lakeville, MN 55044
Registered: Jul 2001


Feedback score: (1)
Leave feedback





Total ratings: 274
Rate this member

Report this Post07-11-2006 10:20 AM Click Here to See the Profile for MinnGreenGTClick Here to visit MinnGreenGT's HomePageSend a Private Message to MinnGreenGTDirect Link to This Post
The ones that Eric/Racingman24 posted are actually mine

I did get them from Ms Lori through a "mall" posting - but she mentioned having more. As far as I can tell, they are the same as what the FieroStore offers (this was a clipping from their website)


Even then, they are not a 100% perfect fit up close (but they look fine from a normal distance).

Here is my "build thread" from awhile back (you'll have to read through much BS, but it's there https://www.fiero.nl/forum/Forum1/HTML/055340.html).

The problem I've run into is mounting the windows and the scoop panels themselves. I originally used black silicone adhesive on the windows, and they didn't last long (didn't lose them while moving at least), and now the double-stick trim tape I used to attach them to the car has come loose. So I'm looking to reattach them using some windshield adhesive and/or epoxy...
IP: Logged
PFF
System Bot
Jake_Dragon
Member
Posts: 32895
From: USA
Registered: Jan 2001


Feedback score: (5)
Leave feedback





Total ratings: 403
Rate this member

Report this Post07-11-2006 01:41 PM Click Here to See the Profile for Jake_DragonSend a Private Message to Jake_DragonDirect Link to This Post
 
quote
Originally posted by fierofierofiero:

http://www.fibersmith.net/closeout/images/turbinescoop_big.jpg

These dont look all to hot though. You could paint em I guess.


I have those and you will have to do a lot of work to get them ready but they are 5 times as thick as the ones from The Fierostore
Cutting the hole and sanding the edges take the most time, mine are not finished yet but I will start working on them again soon.

------------------
Click here to hear my cars

IP: Logged
FieroGTRwideboby
Member
Posts: 591
From: Socal (Pasadena)
Registered: Jun 2004


Feedback score: (1)
Leave feedback

Rate this member

Report this Post07-11-2006 03:19 PM Click Here to See the Profile for FieroGTRwidebobyClick Here to visit FieroGTRwideboby's HomePageSend a Private Message to FieroGTRwidebobyDirect Link to This Post
I got mine from Lori, she used to offer them too, I'm not sure of she is anymore, but they fit great, no trimming, very little sanding and a nice coat of high gloss black really sets them off. They had the stock curve and the dark tint. I was very happy with the quality and presume that the fierostore ones are just as good. In case you're wondering the window is glued with the eurathane (?) glue for the windshields and then the actual panles were glued with the ame stuff to the car.




Alex
IP: Logged
MinnGreenGT
Member
Posts: 11545
From: Lakeville, MN 55044
Registered: Jul 2001


Feedback score: (1)
Leave feedback





Total ratings: 274
Rate this member

Report this Post07-11-2006 03:47 PM Click Here to See the Profile for MinnGreenGTClick Here to visit MinnGreenGT's HomePageSend a Private Message to MinnGreenGTDirect Link to This Post
 
quote
Originally posted by FieroGTRwideboby:

In case you're wondering the window is glued with the eurathane (?) glue for the windshields and then the actual panles were glued with the ame stuff to the car.


Yup... that's the stuff I'm looking to use to re-install mine permanently.
IP: Logged
shawnkfl
Member
Posts: 2457
From: Largo, Florida
Registered: Oct 2004


Feedback score:    (7)
Leave feedback





Total ratings: 72
Rate this member

Report this Post07-11-2006 05:29 PM Click Here to See the Profile for shawnkflSend a Private Message to shawnkflDirect Link to This Post
just out of curiosity, and i apologize for jumping in here......can you take the window out to paint them? or do you have to mask it off?
IP: Logged
Riceburner98
Member
Posts: 2179
From: Natick, Ma, USA
Registered: Apr 2002


Feedback score:    (10)
Leave feedback





Total ratings: 80
Rate this member

Report this Post07-11-2006 05:48 PM Click Here to See the Profile for Riceburner98Send a Private Message to Riceburner98Direct Link to This Post
You would paint the scoop without the window first, then glue that in afterwards. It's "surface" mounted, kind of set in a depression and glued in.
IP: Logged
FieroGTRwideboby
Member
Posts: 591
From: Socal (Pasadena)
Registered: Jun 2004


Feedback score: (1)
Leave feedback

Rate this member

Report this Post07-11-2006 08:43 PM Click Here to See the Profile for FieroGTRwidebobyClick Here to visit FieroGTRwideboby's HomePageSend a Private Message to FieroGTRwidebobyDirect Link to This Post
Yup, first we finished and painted the scoop window, when paint dry glued on the glass while panels were off of the car because they have a slight curve to them, after the dried overnight then the whole quarter window was glued on permanently. There was no pianting after, you do it before the sail panel gets glued to the car.

Alex
IP: Logged
revin
Member
Posts: 8684
From: Pville, TX
Registered: Aug 2001


Feedback score:    (10)
Leave feedback





Total ratings: 234
Rate this member

Report this Post07-11-2006 10:18 PM Click Here to See the Profile for revinSend a Private Message to revinDirect Link to This Post
Fierostore or IRM i forgot

old pic as well
IP: Logged
Team Race-Tech
Member
Posts: 512
From:
Registered: Nov 2004


Feedback score: (2)
Leave feedback

Rate this member

Report this Post07-11-2006 10:22 PM Click Here to See the Profile for Team Race-TechSend a Private Message to Team Race-TechDirect Link to This Post
If you live in the Toronto area, drop by.

Joe

------------------
Race-Tech Automotive inc. & The Fiero Shop.

Specializing in Fiero performance
3800 swaps, custom 3800 and N* Aluminum flywheels, big Brakes, Engine rebuild, Aftermarket wheels, Bolt on performance parts, body enhancements, Racing seats, used Fiero parts, Authorized MOMO dealer, Authorized SSBC dealer, Powerdyne dealer, KVR Performance brake dealer and many more.....

Race-Tech now offers custom exhaust systems for any car or truck up to 3". You bring it we will build it.....

www.thefieroshop.com www.racetechauto.com

E-Mail racetek@idirect.com ... new e-mail address racetech@bellnet.ca

Phone (416) 747-5728
141 Turbine Dr.
Toronto, Ontario, M9L 2S7

IP: Logged
CanadianGT
Member
Posts: 556
From: Toronto, Ontario, Canada
Registered: Mar 2001


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-12-2006 01:32 AM Click Here to See the Profile for CanadianGTSend a Private Message to CanadianGTDirect Link to This Post
WOW.
Didn't know If I would get a reply to this question, and I look tonight, and there area bunch of replys!
I love this place!
Does anyone know if they are sold without the tint?
Thanks
Kyle
IP: Logged
MinnGreenGT
Member
Posts: 11545
From: Lakeville, MN 55044
Registered: Jul 2001


Feedback score: (1)
Leave feedback





Total ratings: 274
Rate this member

Report this Post07-12-2006 09:42 AM Click Here to See the Profile for MinnGreenGTClick Here to visit MinnGreenGT's HomePageSend a Private Message to MinnGreenGTDirect Link to This Post
 
quote
Originally posted by CanadianGT:

WOW.
Didn't know If I would get a reply to this question, and I look tonight, and there area bunch of replys!
I love this place!
Does anyone know if they are sold without the tint?
Thanks
Kyle


Kyle - BigFieroMan ordered his with clear window glass... IIRC it took a number of months to actually get them done:
https://www.fiero.nl/forum/Forum1/HTML/043357-2.html



IP: Logged
PFF
System Bot
FieroFarmGirl
Member
Posts: 243
From: Flambrough, Ontario, Canada
Registered: May 2005


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-12-2006 10:26 AM Click Here to See the Profile for FieroFarmGirlSend a Private Message to FieroFarmGirlDirect Link to This Post
Where did BigFieroMan (Kyle) get his scoops from?
IP: Logged
MinnGreenGT
Member
Posts: 11545
From: Lakeville, MN 55044
Registered: Jul 2001


Feedback score: (1)
Leave feedback





Total ratings: 274
Rate this member

Report this Post07-12-2006 12:43 PM Click Here to See the Profile for MinnGreenGTClick Here to visit MinnGreenGT's HomePageSend a Private Message to MinnGreenGTDirect Link to This Post
 
quote
Originally posted by FieroFarmGirl:

Where did BigFieroMan (Kyle) get his scoops from?


I believe BigFieroMan (Christian... Kyle is the one who started this topic )... got the scoops themselves from the Fiero Store, and the clear inserts from a local (to him) vendor. There is some discussion about it in the thread linked above the pics.

[This message has been edited by MinnGreenGT (edited 07-12-2006).]

IP: Logged
F-I-E-R-O
Member
Posts: 8410
From: Endwell, NY
Registered: Jan 2005


Feedback score:    (17)
Leave feedback





Total ratings: 294
Rate this member

Report this Post02-01-2007 12:57 AM Click Here to See the Profile for F-I-E-R-OSend a Private Message to F-I-E-R-ODirect Link to This Post
I'm bumping this because I thought it was cool, even though I don't have a Fastback and NOTCHIES RULE!!!!!!

------------------
Please Visit My Fiero Store Thanks!

IP: Logged
Newbfiero
Member
Posts: 2989
From: Canada NB
Registered: Mar 2006


Feedback score:    (19)
Leave feedback





Total ratings: 71
Rate this member

Report this Post02-01-2007 11:08 AM Click Here to See the Profile for NewbfieroSend a Private Message to NewbfieroDirect Link to This Post
 
quote
Originally posted by F-I-E-R-O:

I'm bumping this because I thought it was cool, even though I don't have a Fastback and NOTCHIES RULE!!!!!!



Man you got some nerve to say that NOTCHIES RULE!!!!!! even do I got one also Now do you sell t-shirt that says that lol jk ..And yes the are and look good on the fastback I love them ! give a great New look of a style ..Rob
IP: Logged
F-I-E-R-O
Member
Posts: 8410
From: Endwell, NY
Registered: Jan 2005


Feedback score:    (17)
Leave feedback





Total ratings: 294
Rate this member

Report this Post02-01-2007 10:48 PM Click Here to See the Profile for F-I-E-R-OSend a Private Message to F-I-E-R-ODirect Link to This Post
BWAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!

------------------
Please Visit My Fiero Store Thanks!

IP: Logged
Newbfiero
Member
Posts: 2989
From: Canada NB
Registered: Mar 2006


Feedback score:    (19)
Leave feedback





Total ratings: 71
Rate this member

Report this Post02-01-2007 10:58 PM Click Here to See the Profile for NewbfieroSend a Private Message to NewbfieroDirect Link to This Post
lol F-I-E-R-O Now sell me that T-Shirt hehe

Edir Omg I just look at your store and you realy do carry them lmao .I tought it was all a Joke

[This message has been edited by Newbfiero (edited 02-01-2007).]

IP: Logged
F-I-E-R-O
Member
Posts: 8410
From: Endwell, NY
Registered: Jan 2005


Feedback score:    (17)
Leave feedback





Total ratings: 294
Rate this member

Report this Post02-01-2007 11:25 PM Click Here to See the Profile for F-I-E-R-OSend a Private Message to F-I-E-R-ODirect Link to This Post
I just put it on there. I remembered that you had asked for something like that before and finally decided to do something about it. I've been in a funk for a while, but the past few days I've noticed that my creative juices where starting to flow again. So rather than ruin this thread, I started a "My Fiero Store" build thread in the mall. I couldn't resist putting that here though- kinda feels like an opposing team defacing the others high school's locker room...
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock