Hello everyone! (yes, it's been a long time)
I am still into Fieros and while I haven't been actively working on my car or on the forum, I have been collecting parts

There was a listing on ebay for new Fiero glass, and I inquired.... and while there are 3 passenger sides in existence, there aren't any drivers.

At the risk of me looking bad if this doesn't work out....I asked and...

Pro Source Glass can have them made for us!
He has a 98% positive rating and seems to sell a lot of classic car windshields and such.

Of course this is a special order and will take up to 4 months, but it you're sick of looking at the scratches here's the deal:
They are china glass(surprise), and tinted similar to OEM.

From Richard:
5 sets would be $85 ea side ($170 pair) and for 10 sets we can get the pricing to $65 ea ($130 pair)
We will waive any box fees for either deal. UPS will vary from $35-55 a pair .
Of course if there could be a few sets sent to the same location it would be a big freight savings.
Turnaround time is around 4 months from production until it arrives in the States.
We would not take any deposits until I know they are produced and getting ready to be shipped to the States. We require 50% deposit at that time.

So....please post if you're interested!
And when I say interested, I mean really interested and not going to disappear when it comes down to calling him up and ordering.

[This message has been edited by Joe Torma (edited 03-28-2012).]

If we can get 10 solid orders, I'm in for at least a set. Both sides on my car are toast from scratching the dew wipe guides so many times. Did you post this in the mall?

I am in for a set. count me in.

Maybe I should. I just need to see some interest!
All hinges on the response.
$130 a pair...I'd get think about getting 2 sets!

In in for 1 set if we get the 10 or more group price.

Have you done business with them before? Can we check their references other than the eBay rating?

Assuming these fit and function as good as OEM, I'm in for 1 set if we get the 10 or more group price.

If they fit like OEM, I am in as well. Just bought an OEM right side still in the package I can keep as a spare.

Dr. W.

------------------
Is your Fastback GT's trunk seal shot? My Gen III replacement GT trunk seals with solid molded corners are now in production. $95 + $15 flat rate shipping to the US (contact me for international shipping rates) or buy two and pay only a single shipping rate! More info can be found here GT Trunk Seal Project

[This message has been edited by infinitewill (edited 03-28-2012).]

http://www.prosourceglassintl.com/index.html

That's his business and web site.
I don't know him, and I've not done business with him before.
His replies are quick and helpful.

this sounds like it could be a good thing - do they ship to the u.k?

[This message has been edited by jon m (edited 03-28-2012).]

I would like to get in on this action, but new door windows isn't in the budget & is pretty far down the list. Mine are all kinds of scratched up.

If you have some stragglers, I'm in, but it wouldn't be until mid summer. At the earliest.

I couldnt do it right now but possibly in a few months I can. Both sides on my GT are horribly scratched. My coupe is also in bad shape.

------------------
86 GT
87 coupe restoration project.

YES! I'm in. i can't stand looking @ the scratches on my windows when behind them is something other worldly. That and while i can wire anything up and build with all kinds of materials, i can't tint worth a crap.

Put me down for 1 set please.

Mark me down for one set! Mine are scratched horribly, and when I get to redoing the whole thing, I need some new glass to tie it all together!

I am in Joe. I could use a spare set.


Sean

At $130 I may be in for two sets. How hard are these to replace? Do they need to be done only by a glass specialist?

I'll do the 10 set price for 130 if we can get 10.

Count me in!

Count me in if we get enough people for the 10 or more price.

Man. And I just bought a brand new driver side door window For 265 dollars delivered From ebay. It was LOF Though.

I'd like a set as well.

doublec4, if you want to go in on shipping I'm in Toronto often enough to save some. Maybe some other Canadian members want in...

Brad

I am also in for a set. What guarantee do we have that they will fit? The China thing is a bit scary..

Can they not reproduce the quarter glass as well and just make it from Glass instead of Lexan?

quote Originally posted by BtotheB: I'd like a set as well. doublec4, if you want to go in on shipping I'm in Toronto often enough to save some. Maybe some other Canadian members want in... Brad

Sounds good, lets do it.

I'm in for a set @ $130.

-fh

Count me in for a set!!!!!!

And will he ship to Canada?

Thanks
Nolan

I'm in for a set at the $130 price, possibly two. Can the price come down more if we up the production even more?

quote Originally posted by infinitewill: If they fit like OEM, I am in as well. Just bought an OEM right side still in the package I can keep as a spare. Dr. W.

Ditto. Fiero owners would be crazy to pass this up.

You bet I'm in, even at the 5 amount, but I don't think there's going to be an issue getting 10. What does the price go to if we get 20, or 50 people?

------------------
-Chris
'85 V6 SE 4sp (SOLD)
'88 GT Auto (fun car)
'99 Kawasaki Vulcan 500, owned since new
'03 Sentra SE-R Spec V (Daily driver)
'09 G37x w/ Premium & Nav (wife's car)

Looks like an easy 10.
I'm going to make a few phone calls tomorrow...

Keep posting if you're a serious "yes"
I will inquire about a buy of 20.

Put me down for one set please! That will give me 4 months to get new dew wipes!

Richard emailed me a little more info this morning.
The Chinese company is Fuyao Glass

They got a "supplier of the year" award from GM and looks like they service many automakers
http://www.fuyaogroup.com/en/customer.html

I could also use one or two sets of door glass.

Nelson

Count me in for a set, too.

I just spoke with him on the phone.
Richard was very helpful and enthusiastic about helping us.
There are possibly a couple of OEM windows out there he's checking on also.
He ships internationally. He also explained to me how some of the glass business works.

Soooo.. if we get enough orders, there is the possibility of a lower price.

How about reproduction GT quarter glass...in glass? Who wants to send him a pair to reproduce...they'll get the 1st set free!
I assume he'll have to see them to see if it's possible.

[This message has been edited by Joe Torma (edited 03-29-2012).]

Are these going to be OEM quality tinted glass?

quote Originally posted by Formula88: Are these going to be OEM quality tinted glass?

Yes, I spoke with him on the quality, and he stands behind the products he sells.
He says he never had a problem with the china glass....even to Ferrari and Rolls Royce customers.

They will be slightly tinted as original.

[This message has been edited by Joe Torma (edited 03-29-2012).]

I too would be interested in at least one set if we get the $130 price or lower.

Count me in to.

Thanks
Nolan

I'll buy a pair.. .

I also liked the idea of doing the notchie quarters in glass like the '84's