| | | quote | Originally posted by weloveour86se:
So it is a pre recall 85 intake tube then? Reason I ask is cause its been sitting in a parts bin and I just wanted to be sure it was from a Fiero. All the ones I've seen thus far don't have a swivel. Please again forgive my noobness.
|
|
Yes, it is a pre-recall intake tube for the 2.8L V6.
It is not of any real intricate value, since the replacement intake tube installed under the recall is very common & was of a lot better design. Additionally, the "front" portion of the PCV setup was slightly different when this pre-recall tube was installed, thus if you don't have that to go along with the tube this tube is useless to put on a car. The "front" main portion of the PCV tube was left on all V6 Fieros, but I'm sure there was also a connector piece that was just discarded (the tube itself would have been capped off). The only value it may hold is for aesthetically pleasing an individual whom may be looking for items such as those to have for historical purpose.
[This message has been edited by Fiero84Freak (edited 03-07-2013).]
. At the center hose clamp. Please forgive my noobness but I did a PFF search. I wanna say I got it with some 85 parts but am not sure at this point. The breather box end is a harder plastic, the TB end is pliable rubber. Part # is 10040193 looks like. Has Murray stainless clamps fr Canada. Dunno.. 
