Looking to possibly liquidate some of my project stuff. I will list things below-ask any questions and I can get pics if needed. Testing the waters-but am 90% sure this will all go.
'88 Coupe-100k pretty much rust free-roller-no drivetrain '93 Camaro dash-was going to go into above-almost everything '92 3.4 TDC 100K-long block-have an almost complete GM gasket set to go with itSOLDSOLDSOLDSOLDSOLD '93 W41 Quad 4-supposedly rebuilt(rings, bearings, etc.) 80K on car-have Rolling car if interested '93 W41 transaxle-from above car/engine(80k miles) '92 Getrag 284 100k miles-have brand new clutch to go with this '90 LG5 out of Turbo Grand Prix-supposed to be no miles dyno engine long block-REALLY clean '85 SE-automatic parts car More parts-
If anything tickles your fancy LMK I am in Minnesota-sorry for the lack of that :P
Greg
[This message has been edited by Fieroguy65 (edited 10-25-2005).]
Well is sucks that your not going through with the projects you told me about. If we can make a deal on some of this stuff I might make a trip down there again. I am definatly interested in the camaro dash, we just need to work out a price, also probally the 85 parts car, also maybe some parts off the camaro if you still have some of it left. PM me on prices and we can go from there.
Mike
------------------ www.FierosandMore.comThis is a link to my personal web site, has pictures of all my projects and parts for sale.
IP: Logged
01:44 PM
Scythe Member
Posts: 1055 From: Burke, Virginia Registered: Apr 2003
THe motor is fairly complete-missing the injector harness-no wiring. The O-ring leaked-but I do have the gasket set to go with. I would take $275+shipping(I get decent shipping rates throguht work). I can get pics if needed.
Greg
IP: Logged
02:48 PM
squisher86SE Member
Posts: 1350 From: Franklin, IN, USA Registered: May 2005
w41 quad4 + fiero = yummy...hell, just the w41 is something to talk about, here's a bump for ya, and let let me know if nobody wants that w41 stuff, I might be talked into taking it off your hands. Especially if you're close enough for me to pick it up.
By any chance do you have the underbody cooling line on the passenger side for the 88?
I really do not need a good one as I already have one but I'm looking for a damaged one maybe that someone is not needing as long as the side nearest the engine is good for at least 6-12 inches. I'm working on a 3.4 dohc swap and need this for the throttle body coolant lines I am fabricating a return line for.
------------------ Ron Freedom isn't Free, it's always earned. My imagination is the only limiting factor to my Fiero. Well, there is that money issue.
The '88 is an auto-but I have everything for a 5 speed. It is black/grey, good shape. It has no drivetrain in it-it was 4 cyl/auto. No PW or locks. LMK what its worth.
