OK everyone, we have some of the windows in now in a limited quantity, and they are very nice. We are ready to sell them, This first batch is the factory light green tint. The next batch we will have made will be the custom colors, smoked, red, and blue. I can accept PayPal payments at this address LoriAnn099@aol.com and this is also my email address, if anyone wants to email me about them. The price is $229.00 a set plus a flat rate of $18 shipping, for a total of $247.00
I just completed a paypal transaction, thanks for all of this hard work. I wish you success in this venture, it appears to be the first well thought-out replacement. Hoping to hear from you soon!
------------------
'87 GT, daily driver '78 Toyota longbed, parts runner '84 F250 Xcab, BIG parts runner '87 30' Kit Classic TT, living in it.
IP: Logged
09:15 PM
2000RagTop Member
Posts: 3999 From: Sussex, (Milwaukee) Wi. USA, Earth Registered: Jun 2003
Any chance of better pics? Those are a little dark and maybe its my monitor, but kinda blurry if you look for the details. Also maybe a side by side? I think im holding off to see the red tint ones though, but we'll see.
Any chance of better pics? Those are a little dark and maybe its my monitor, but kinda blurry if you look for the details. Also maybe a side by side? I think im holding off to see the red tint ones though, but we'll see.
Better?
IP: Logged
11:29 PM
Apr 5th, 2006
Songman Member
Posts: 12496 From: Nashville, TN Registered: Aug 2000
Very nice! Had toyed with the idea of producing these myself. Glad to see that they are on the market. Might be interested in a set or two in the future.
Just a few questions...
Do they come with the adhesive tape? What material are they made of? Do you have any pics of them installed? Will you have any for sale at the swap meet?
Thanks!
------------------ Got Blue?
BlueGT
IP: Logged
09:12 PM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Hi. How can I get them if I don't have paypal? I need them ASAP. Thanks
PM sent
Anyone that wants to order a set of the windows, but don't have PayPal, can send a check or M.O for them, just PM me and I will give you the address to mail it to. Thank You Lori
[This message has been edited by MsLoriFiero (edited 04-05-2006).]
IP: Logged
09:57 PM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Very nice! Had toyed with the idea of producing these myself. Glad to see that they are on the market. Might be interested in a set or two in the future.
Just a few questions...
Do they come with the adhesive tape? What material are they made of? Do you have any pics of them installed? Will you have any for sale at the swap meet?
Thanks!
Do they come with the adhesive tape? Yes What material are they made of? they are molded Acrylic Do you have any pics of them installed? not yet will have some soon, I'm going to put a set on my car in a few days Will you have any for sale at the swap meet? Yes
IP: Logged
10:01 PM
Apr 6th, 2006
California Kid Member
Posts: 9541 From: Metro Detroit Area, Michigan Registered: Jul 2001
Particularly in this picture, the bottom edge looks like its sharply cut off, not curved like on the OEM ones. Can you confirm if these are EXACTLY like the GM originals, or bluntly cut off like some other aftermarket windows I've seen?
IP: Logged
07:38 AM
Cplensdorf Member
Posts: 663 From: Grass Lake , MI Registered: Nov 2000
I have never dealt with her before, so I reserve judgement....but in my book, a reputable vendor returns emails in a timely manner so that the quality of service does not trump the quality of product...I am still anxious to see them, though! I am hoping to refer others...
IP: Logged
11:10 PM
Apr 8th, 2006
Raydar Member
Posts: 40927 From: Carrollton GA. Out in the... country. Registered: Oct 1999
does that $18 flat rate shipping quote apply to orders from canada?
No, shipping to Canada will be more.
As far as everyone wanting to panic that ordered a set of the windows, there is no need to panic, I plainly stated in one of the posts, that the ETA for a set would be 2 weeks from the date they were ordered. I do work full-time also and do not sit on the computer all day every day. Thank You to everyone that ordered a set. Lori
IP: Logged
02:23 PM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Particularly in this picture, the bottom edge looks like its sharply cut off, not curved like on the OEM ones. Can you confirm if these are EXACTLY like the GM originals, or bluntly cut off like some other aftermarket windows I've seen?
If you are referring to the little ridge that runs along the bottom edge of the original factory windows, then I will have to say no, these do not have it. The original windows were cast into a mold that isn't available to us. These windows are molded onto a mold, and it would be next to impossible to add that little ridge having them molded the way we do. and the ridge is not visible once they are installed, most people don't even know that it is there. I can not say these are 100% identical to the factory windows, which was my goal, but I feel we got it to 98%
Lori
IP: Logged
09:52 PM
Apr 9th, 2006
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Now, who's going to install a set and post with pics and their firsthand independent opinion?!?! I hope it's soon, becase NOS windows are shockingly expensive these days.
If you have seen a sample of the dark (smoked) tinted ones, does the GT insignia show through very well if at all? I may have missed it when I was reading, but when you were with the original printer you said it was going to be no big deal if we wanted something besides the standard GT insignia on the windows. I don't remember seeing any confirmation that this was still the case with the new printers, please clarify. If it would show through on the dark tinted windows I think it would be pretty cool to have the GT nose emblem printed on them instead.
To echo everyone elses response, thanks again for doing this for us.
IP: Logged
06:01 PM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
If you have seen a sample of the dark (smoked) tinted ones, does the GT insignia show through very well if at all? I may have missed it when I was reading, but when you were with the original printer you said it was going to be no big deal if we wanted something besides the standard GT insignia on the windows. I don't remember seeing any confirmation that this was still the case with the new printers, please clarify. If it would show through on the dark tinted windows I think it would be pretty cool to have the GT nose emblem printed on them instead.
To echo everyone elses response, thanks again for doing this for us.
The GT doesn't show though on the smoked very well at all, there will be a few days delay on pictures of the smoked windows. The plastic company sent us the wrong material and we had to reorder it.
Lori
IP: Logged
10:58 PM
Apr 12th, 2006
Mickey_Moose Member
Posts: 7543 From: Edmonton, AB, Canada Registered: May 2001