We have someone who is making a new custom dash and consol for the fiero's. The dash comes blank and you can put whatever type of gauge's you want in it. The fiero A/C ducts will fit in the same location, or you could make your own, and has enough room to install larger speakers than the stock fiero. The consol also come blank and is a little larger than the stock consol for those who like to install large speakers there also, There is a glovebox kit that comes with the consol, if you would rather install those instead. We will be taking orders if someone wants to order one. They can be ready in a week from the date order is placed. If you have any questions, please feel free to ask. More pictures are available. Price is $699 Lori
[This message has been edited by MsLoriFiero (edited 11-29-2004).]
IP: Logged
04:18 PM
PFF
System Bot
mattm Member
Posts: 1647 From: lancaster, pa Registered: Aug 2003
There appears to be a joint just ahead of the shifter, look at the shadow under the center console. It appears that the center console is one piece to the front, and the dash is one piece with the radio pod.
JazzMan
IP: Logged
11:39 PM
Unsafe At Any Speed Member
Posts: 2299 From: Cheyenne, WY Registered: Feb 2003
This is a 2 peice, it does split just ahead of the shifter. I will get more pictures posted from different sides. I should be able to sell the dash alone. I will check on the price today.
IP: Logged
06:58 AM
paulcal Member
Posts: 2608 From: Jacksonville, Fl Registered: Oct 2002
The dash can be bought separately for $499, although it would need to be trimmed some to use the stock shift surround, and the consol can also be bought separately for $199 with the glove box kit or $175 without the glove box kit, the glove box doors are made with carbon fiber. Thank You Lori
IP: Logged
08:28 PM
PFF
System Bot
Nov 30th, 2004
Bearkat Member
Posts: 273 From: Huntsville, Texas Registered: Oct 2004
So is that $199 shipped for the center console with the glovebox? Cause I have only $200 to spend as a gift from someone, and I desperatley need that! TIA
------------------ '87 Iron Duke A/T Mods: Transgo Shift Kit, MSD Coils, Spiltfire Wires, K&N Filter, Ultimate Dogbone, Catco Highflow Cat, Chrome Exhaust Tips, Pilot/Cyber White Headlight Kit
IP: Logged
12:02 AM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
Are they made with fiberglass? the console is what I am looking at. I assume that it is a blank ( no shifter plate or reg. glove box door)? How long of a run will you be making these?
I notice that you have a speaker on the side of the upper console, is the console tapered towards the top to avoid seats and wide shoulders rubbing against it? I'm impressed with all the work and effort you've been putting into Fiero mod options. Keep up the good work!
ps- sorry for being a jerk a while back, some of us take longer to grow up than others...
IP: Logged
12:44 AM
MsLoriFiero Member
Posts: 695 From: Lester AL USA Registered: May 2003
The speakers on the side might be a tight squeeze with the stock seats, this car had custom seats installed, but there is plenty of room for a 8" woofer in the front and a tight fit for a 10," I admit the speakers on this car may be a little over done, but it does sound good. Lori
IP: Logged
11:19 AM
Racer_JT Member
Posts: 1419 From: Lynchburg, Virginia, USA Registered: Apr 2002
I hope you're going to have better pictures of the dash That yellow is horrible. Would be good to see a finished car in a nice tastelfull orange (kidding ! go grey !)
DLD
IP: Logged
10:46 AM
Jun 27th, 2005
RacerX10 Member
Posts: 235 From: Russellville, AR Registered: May 2005
That yellow is horrible. Would be good to see a finished car in a nice tastelfull orange (kidding ! go grey !)
