I am parting out a 1987 Fastback.
Parts that are not available are the Fastback convertion items, GT nose, front wheel well skirts, right front fender, radio wiring harness, front rotors and drivers side headlight door.
Pics can be produced upon request.
Thanks,
Tommy

need fenders if they are black

------------------

COMING SOON: 4.9 complete rebuild with buds outback northstar pistons , delta cams E303 cam , full ported , polished , and flow tested heads and manifolds. rockcrawl's custom chip , polished crank
86 and 87 fiero database www.geocities.com/cwandall/fiero.html

How much for the drivers side seat belt guide, and GT steering wheel. Oh and is it grey or tan interior?

quote Originally posted by wiccantoy: need fenders if they are black

The drivers side fender is avalible and it is white. it is the fiero that you were gonna buy from pa i went and picked it up this weekend. thanks

Do you happen to have a near perfect drivers (PON) side taillight assy? Near perfect in my mind is the absence of cracks and delamination. Basically, any flaws that can't be polished out.

quote Originally posted by rpro: Do you happen to have a near perfect drivers (PON) side taillight assy? Near perfect in my mind is the absence of cracks and delamination. Basically, any flaws that can't be polished out.

I will have to check out the tail light, I will post a picture in an hour or so, with a price. thank you.

I need the front C100 wiring harness that controls the blower fan/windsheild wipers. Is this still available?

Could use a drivers side seat mechanism cover and adjust lever if yah got em.

Thanks

quote Originally posted by Elenor84: I need the front C100 wiring harness that controls the blower fan/windsheild wipers. Is this still available?

Yes the C100 wireing is still avalible, make an offer and send a pm. thanks

Here's a free bump.

Welcome to the forum, it's nice to see a new member from NY. I know a couple guys here that live in Martville and Mexico area not too far from you.

Well, since we're talkin parts anyway, how much for a swaybar?
------------------
Vin

Registered since March 2003
http://www.latuslink.com/fiero/wgf2007
86 SE 2M6 Deceased
86 SE 2M4 Burned
87 GT Black
87 GT Med. Red over Silver

[This message has been edited by FieroVin (edited 01-08-2007).]

I need the timing cover (behind the water pump), $$+ shipping to 56065??

Is the drivers side coolant tube is good shape? I need the one that runs from the radiator under the drivers door to the engine compartment.

quote Originally posted by FieroVin: Here's a free bump. Welcome to the forum, it's nice to see a new member from NY. I know a couple guys here that live in Martville and Mexico area not too far from you. Well, since we're talkin parts anyway, how much for a swaybar?

Hey thanks, i am friends with pontiacj8, he got me into these thing and now i cant stop buying them........but the sway bar is avalible, make an offer.and see you around!

Any good on a left tail light assy?

so your parting out my fastback? I thought you were doing the 3800 s/c with 6 spd ect... ect.... I really didnt want the car parted out, but i guess tooo late now.... I hope you get more than the $500 you payed me.

------------------

quote Originally posted by fiero7412: Sure is avalible. How does 12 dollars shipped sound? thank you.

Sounds good... Just lemme know how you want payment.

Thanks,
Tim

quote Originally posted by BLK 86 FSTBAK GT: so your parting out my fastback? I thought you were doing the 3800 s/c with 6 spd ect... ect.... I really didnt want the car parted out, but i guess tooo late now.... I hope you get more than the $500 you payed me.

i am but the chassis is rotted all over the place! so i am putting all the good GT parts on my chassis. I didnt think the underside of the car was that bad for being in P.A.

Bump

quote Originally posted by fiero7412: Parts that are not available are the Fastback convertion items, Tommy

Would you consider selling the passenger side quarter window?
Thanks.

quote Originally posted by rwlekey: Would you consider selling the passenger side quarter window? Thanks.

PM sent!

Is the drivers side front fender in good shape? No cracks etc.

How much for the drivers side front fender? Zip code 19954

Thanks

quote Originally posted by 88GT5.0KILLER: Is the drivers side front fender in good shape? No cracks etc. How much for the drivers side front fender? Zip code 19954 Thanks

PM me with an offer. thank you

tommy

PM sent

How much for the door glass (both sides)? I would be interested if they are not scratched.

How many miles on the engine? How old is the alternator?

Only one window right at the moment i will get back on the other tonight..... Thank you.

quote Originally posted by yellowdog: How much for the door glass (both sides)? I would be interested if they are not scratched. How many miles on the engine? How old is the alternator?

The motor has just over 200,000 miles & has a knock. Not sure how old the alternator is, I could remove it and have it load tested by a Starter/Alnernator professional friend of mine..

bump

Hi,

looking for the driver's side lower rocker panel.

I could pick up

thanks,

Dave Porter

------------------
Dave Porter
Solo II Racer 4 Sale
Mendon, NY

quote Originally posted by gear-head2: Hi, looking for the driver's side lower rocker panel. I could pick up thanks, Dave Porter

Sorry that aint for sale i need it for my gt conversion, sorry bout that. but i do have a set for a stock notchback if you are interested?

im looking for an auto shifter. what would that run me
djcam

quote Originally posted by fiero7412: Sorry that aint for sale i need it for my gt conversion, sorry bout that. but i do have a set for a stock notchback if you are interested?

I need something for an 86 SE so the stock Notchback rocker panel is actually what I need.

I guess I didn't realize they were different.

Let me know the cost.

thanks

quote Originally posted by DJCam: im looking for an auto shifter. what would that run me djcam

PM sent.Thank you

bumper