I have two Cavalier Digital Dashes for sale to put into your Fiero. Instuctions will be included on how to do the install

One with the Harness for 80.00 Shipped
One with the Harness and outside Temp Sensor for 100.00 shipped.

I have pluged them in and they light up and go through there test mode. one needs a new bulb by the tach. Can not remember witch one it is.
Paypal Prefered

Thank You

------------------
Fiero Thomas
86 Fiero GT
85 Fiero GT
NIFE Member
http://www.fieronews.net

[This message has been edited by Fiero Thomas (edited 03-20-2007).]

Bump For the night crew

are the plug and play? if not how hard is the install? (im a complete and total wreck as a mechanic)

thanks
-todd-

Do you have a pic that you could post or e-mail me? I've seen a few posts (I'll have to try a search). How hard is the install. I've got wiring / electronic experience so i'm guessing It should'nt be that bad of an install. I have a 308 replica so I'm just wondering how the digital would look in there.

------------------
I'm not driving too fast, . . . I'm flying too low.

[This message has been edited by 3084me (edited 03-21-2007).]

quote Originally posted by Fiero Thomas: I have two Cavalier Digital Dashes for sale to put into your Fiero. Instuctions will be included on how to do the install One with the Harness for 80.00 Shipped One with the Harness and outside Temp Sensor for 100.00 shipped. I have pluged them in and they light up and go through there test mode. one needs a new bulb by the tach. Can not remember witch one it is. Paypal Prefered Thank You

Very good price,
If anyone needs a full installation instruction with pictures, visit my web site
www.azoteliquide.com/fiero
click on other modification.

Stephane

------------------
1987 Fiero GT 3800SC
Mods: Custom PCM, 3.4" pulley, ZZP TB Spacer, 180 T-stat, Magnaflow muffler, AeroForce and A/F Ratio gauge, K&N, No-Cat

http://www.azoteliquide.com/fiero

Good info on this site. Here are a few links

Wireing
http://www.azoteliquide.com...ster/wiring_diag.htm

Install
http://www.azoteliquide.com.../digital_cluster.htm

They are not htat hard to install. The instruction book that I have is very detailed and this can all be done within a few hours. It is a good project for a novice as you just have to follow the color codes that are given in the instruction book that I have for you.

------------------
Fiero Thomas
86 Fiero GT
85 Fiero GT
NIFE Member
http://www.fieronews.net

Thanks for the links.

Are the clusters tested or did you just verify that they lit up?

A little unconventional looking for my 308 replica but I think I may be interested in doing the swap.

------------------
I'm not driving too fast, . . . I'm flying too low.

Yes I did test them and they did light up. Went through there turn on phase and all was good

------------------
Fiero Thomas
86 Fiero GT
85 Fiero GT
NIFE Member
http://www.fieronews.net

Are these dashes from the V-6 cars?

Yes they are

Here is a stupid question,

Do you use the original Fiero Odometer and is there space to locate it somewhere. Mabye I just can't see it in the pic. (or is the odometer digital on the Cav ? )

I'm doing a 240SX dash in my car so I'm just checking to see if I have room. Can you tell me the appx dimensions of the cluster?

Thanks,
------------------
I'm not driving too fast, . . . I'm flying too low.

[This message has been edited by 3084me (edited 03-21-2007).]

Are your instructions different or more complete than the ones linked above. I have a Cav dash out in the garage and may try this one of these days. I'll want the simplest instructions available whenever I start.

PM Sent.

ONE sold without the temp sensor.

Still have the one with the temp sensor.

Thank You

------------------
Fiero Thomas
86 Fiero GT
85 Fiero GT
NIFE Member
http://www.fieronews.net

Booth are sold.
Thank you to all that responded

------------------
Fiero Thomas
86 Fiero GT
85 Fiero GT
NIFE Member
http://www.fieronews.net