Hi Guys,

I have a Gear Reduction Mini Starter for a V8 swap. (Suitable for an Archie Kit) and a 1987 GT front bumper. Actually, it's from and SE but it's that "GT nose style".

Pics to follow.

Looking for $70 for the Starter (Brand New) and $70 for the nose.

Pics to follow.

------------------
I'm not driving too fast, . . . I'm flying too low.

these are the ones we were talking about before . consider them sold.

glad i stayed up . was just about to go to bed

------------------

DONE: 86gt 5 speed 4.9 complete rebuild with buds outback northstar pistons , delta cams E303 cam , full ported , polished , stronger head springs, and flow tested heads and manifolds. rockcrawl's custom chip , polished crank . too much to list

88 coupe t-top #656 1 of only 339 base coupes made SOLD
85 t-top BEING PARTED
87gt parts car
86 and 87 fiero database www.geocities.com/cwandall/fiero.html

Hey there Chris.

I think we both got tied up last time and kept missing each other.

They are the same ones. Glad I caught you.

Brian

------------------
I'm not driving too fast, . . . I'm flying too low.

I'm considering a mini starter for the 4.9. I know this one is sold, but if it fits the 4.9 - Fiero trans swap, please provide the manufacturer and part number. Thanks.

------------------
FierOmar

quote Originally posted by FierOmar: I'm considering a mini starter for the 4.9. I know this one is sold, but if it fits the 4.9 - Fiero trans swap, please provide the manufacturer and part number. Thanks.

the starter is being purchased for a 350 fiero not my 4.9. not sure which mini starter will work on a 4.9

quote Originally posted by wiccantoy: the starter is being purchased for a 350 fiero not my 4.9. not sure which mini starter will work on a 4.9

SOLD. Thanks Chris.

(Also, it was for a SBC. I too am not sure abut a 4.9 starter).

------------------
I'm not driving too fast, . . . I'm flying too low.

any way to provide the part number for the starter?
chris

quote Originally posted by salmonfieros: any way to provide the part number for the starter? chris

not sure on the part # but you can go to summitracing and they have a ton of micro starters for the 350. the starter isnt in the factory box .

Hi,

I think the only numbers on the top was a check off box for either the standard finish or the "show" finish which was a gloss black body with a polished end cap).

I purchased it from a local speed shop. They have a great reputation for the quality of their performance parts. The style was like the Powermaster that Archie suggests using but it was not a Powermaster.


I had a Powermaster on the last swap and this starter's quality was superior in the quality of the finish of the body, end cap etc. I know some of these speed shops seem to have their own "branding" of certain parts like cams, headers etc. I'm guessing they have them manufactured by some major manufacturer.

I'll see if I have any paperwork here that may help you out.

[This message has been edited by 3084me (edited 08-06-2007).]