Hi all,
I just picked up this 1985 SE today and it is a little too rough for me to try and restore. I am selling everything from the car to fund my wife's VR6 swap into her Fiero. I will post many pictures tomorrow. Any specific details or pictures you would like to know/see just ask and I'll post it.
The car is gray with a light gray interior. Somehow, there are many duplicate parts in the car (ie three sets of decklid vents, two fenders, etc)
The car does not run. I'll even offer a special discount to those who come and pull the part themselves....I have a lift the car can go on to get the underside parts off easier.
Dave
ps. The seats are torn up.

All offers concidered. I will post pics upon request. Here is a list of most of the parts and the prices:
Valve covers $10 ea
throttle body $15
1987 headlight motor $10
distributor cap new old stock $5
decklid vent (2 vented, 1 solid) $5 ea
t stat housing $10
intake manifold $10
cruise cable $10
acc. cable $10
front hood, gray $50
nose $40
LF fender $20
RF fender Black $20
door glass B/O
sunroof $20
marker lights (ribbed) $10 for all 4
lower quarter panels $10 ea
all ribbed trim B/O
engine and transmission for parts B/O
p/s tail light $10
gold nose emblem $10
interior door panels w/ pocket (nice) $25 ea
seat belts $20 ea
wiper arms $10 for the set
radiator $25
rad fan $10
head light assy w/ motors (unknown cond) $10 ea
washer bottle (1 small, 1 normal size) $10 ea
F trunk seal $10
R trunk seal $10
spare tire $20
all interior B/O (seats are shot)
sunroof bag (2 avail) $20 ea
R bumper from 1986 SE silver $50
fuel rail w/ injectors $15
14" rims $10 ea
ignition coil $5
ecm $10
steering wheel $10
instrument cluster $10
console glovebox (2 avail) $10 ea
sunvisors $5 ea
overhead map light assy. $10
jack $5
p/s seat tracks $5

[This message has been edited by bmwguru (edited 01-05-2008).]

what kind of shape is the tranny in

quote Originally posted by serealport: what kind of shape is the tranny in

Not sure. The gas tank came on the outside of the car, so it doesn't run. I bought it sight unseen, to use for some small parts for my two Fieros....and part or scrap the rest.
Dave

what about the driver side seat

Bump.
The seats are not in the best of condition. The dash is pretty nice. I'm going to put it on the lift by next week and see what is worth keeping or going.
The cradle has been sold.
Also, there is one solid decklid vent and a bunch of the vented ones.
Dave

upper+middle plenum?

possibly OPSU?

------------------

See my film creations..
Black Betty Build
Black Betty, Round 2

How about the Passenger Rear Qtr. Panel? (Not sure that's what it's called)

Any AC? ........... looking for the low-side accumulator tubing with the big black nut on it ............. the tubing has two 90degree bends and runs to the black rubber hose under the brake booster ........ thanks

PM Sent!

I got a lot of pm's this morning...I'll check on all the parts when I get to the shop and pm you all back
Dave

o yea! front a-arms too!!! nothing on them though..

pm sent.

bump for new lookers.

TV cable OK?

Power mirrors? How much?

Thermostat fill neck? How much?

Thanks!

Steve

pm's returned

bump

how much 4 the headlight switch on dash?

bump for a new month. Still a lot of parts left. Help fund my next Fiero engine swap.
Dave

Steering wheel and horn button, and the little spring and plastic thing that makes the horn work, shipped to 77364

Full Dash , Radio Surround center sonsole shifter all of pics please and price for whole set.

Both complete sail panel assemblies shipped to 48083 UPS commercial address. Couldn't tell by picture, what condition is the upper right fender? Thanks.

How much for the radio assuming it works?

quote Originally posted by linuxpowered88: Full Dash , Radio Surround center sonsole shifter all of pics please and price for whole set.

There is a crack in the center, but that is behind the rally gauges, so you wouldn't see it.
Dave

[This message has been edited by bmwguru (edited 12-17-2007).]

PM sent

update with parts and price list. Everything goes! Combined shipping and discounts for multiple sales.
Dave

"R bumper from 1986 SE silver $50"
Do you still have the rear bumper, is it the aero or bumper pad style? Also it has the ribbed trim right? Anyway if you still have it, send me a couple of pics. Might be just what I need to finish my car.
Thanx - Dan

quote Originally posted by Cowabunga_kid: "R bumper from 1986 SE silver $50" Do you still have the rear bumper, is it the aero or bumper pad style? Also it has the ribbed trim right? Anyway if you still have it, send me a couple of pics. Might be just what I need to finish my car. Thanx - Dan

here is a link to an older thread. I tried selling it a few months ago, so I gave it a little bump in this thread
https://www.fiero.nl/forum/Forum4/HTML/038929.html
Dave

bump for new lookers. I might throw some stuff on ebay later today as well

PM sent

do you have an 85 pass side head light motor?? if not will the 87 work??

scooz13@gmail.com

Matt

I am looking for all the pieces that go under the front aero bumper........not the egg crate or the steel bumper but all the brackets and "stuff"............

does the car have both seat recline handles? if so i am interested

------------------
87 fiero gt 4.9
99 trans am ls1

Do you have the rear deck lid lock assemby, ( lock cylinder, lock gasket, retainer and all hardware to attach) do not need solenoid.

ship to 47909

pm's returned

bump

I need a the C500 connector with the complete wiring running into the cab. The bolt on mine broke off. Let me know if you have one and how much

Joe Sokol

------------------
85 SE Daily driver with a 3.4 DOHC build underway
88 Formula/GT 4.9 Allante Intake (My Baby)

bump