Yep, I'm looking to buy Right side Fiero stick shift Axles shafts.

The shaft is 30.375" long & I'm looking to buy all of them I can get.

If they have C/V & Tri-pot ends on them that's ok but all I really need are the shafts themselves.

Paying $20.00 plus reasonable shipping.

Archie

[This message has been edited by Archie (edited 10-30-2007).]

Which is it left side as in post or right side as in the topic?

if it's over 30" long either it's a right side axle or he's planning a reeeeeeally wide body kit

Russ544

quote Originally posted by Russ544: if it's over 30" long either it's a right side axle or he's planning a reeeeeeally wide body kit Russ544

Fixed it, sorry for the confusion.

Archie

https://www.fiero.nl/forum/Forum4/HTML/039765.html

he's holding them awaiting your confirmation, so get ahold of him asap. they're free btw

Russ544

[This message has been edited by Russ544 (edited 10-30-2007).]

What are you doing with them?

quote Originally posted by Archie: Yep, I'm looking to buy Right side Fiero stick shift Axles shafts. The shaft is 30.375" long & I'm looking to buy all of them I can get. If they have C/V & Tri-pot ends on them that's ok but all I really need are the shafts themselves. Paying $20.00 plus reasonable shipping. Archie

for $50 i'll remove the 2 axles from the tripods and crap and ship them to you, i'll let you know tomorrow.
Andrew

[This message has been edited by Back On Holiday (edited 10-30-2007).]

Probably won't get to ship it till this weekend, But I have one for you.

Tell you shipping price later,

Darren

------------------

quote Originally posted by Back On Holiday: for $50 i'll remove the 2 axles from the tripods and crap and ship them to you, i'll let you know tomorrow. Andrew

Sounds like a plan. awaiting word.

You don't actually have to remove the ends. I can remove the ends here but taking them off makes them a lot easier to ship.

Archie

some new plan for the 6 speed trans setups i hope.

matthew

quote Originally posted by Archie: Yep, I'm looking to buy Right side Fiero stick shift Axles shafts. The shaft is 30.375" long & I'm looking to buy all of them I can get. If they have C/V & Tri-pot ends on them that's ok but all I really need are the shafts themselves. Paying $20.00 plus reasonable shipping. Archie

did you see the free ones in the mall I showed earlier? you'd better jump on em before someone else does
https://www.fiero.nl/forum/Forum4/HTML/039765.html

Russ

quote Originally posted by Russ544: did you see the free ones in the mall I showed earlier? you'd better jump on em before someone else does https://www.fiero.nl/forum/Forum4/HTML/039765.html Russ

Yes I did, Thanks

He responded earlier in this thread.

Archie

bumpppppp

more axles needed

Archie,

Thanks for bumping this up, I have been busy and totaly forgot about the axle. Very sorry. I will try to get it out to you in the next few days. Again I'm very sorry I dropped the ball on this.

Darren

------------------

btw I hate to butt in and tell people how to ship these axles, but UPS will distroy them if you dont pack them correctly, I work for UPS and I know, so heres how I shipped mine:

[This message has been edited by Back On Holiday (edited 08-16-2008).]

quote Originally posted by Back On Holiday: btw I hate to butt in and tell people how to ship these axles, but UPS will distroy them if you dont pack them correctly, I work for UPS and I know, so heres how I shipped mine:

I gotta tell you, these were packed better than anything I've ever rec'd.

They could have been dropped from an airplane & not been damaged.

Thanks.

Archie

Also a reminder.......

I don't care if they have ends on them I have the tools to take the ends off of them.

If you don't have the tools or don't want to do that nasty job, you can just leave the ends on.

Archie

[This message has been edited by Archie (edited 11-15-2007).]

In that case I might just leave the ends on. I was trying to save some shipping weight, but I am really having a heck of a time trying to get one of them off.

How's $15 for shipping for a total of $35? Pm your address before 2:00 and I can get it out today, or else I won't be able to get it out till monday. I have it boxed and ready to go.

Darren

quote Originally posted by Darren's 87 coupe: How's $15 for shipping for a total of $35? Pm your address before 2:00 and I can get it out today, or else I won't be able to get it out till monday. I have it boxed and ready to go. Darren

Thanks, you have a PM?

Archie

More axles??? ^^^

Hello

bump

I have one to send, is there anywhere to find the directions to remove the ends? I can have ready to go next week. Shipping from ZIP 30534. Thanks, Scott

quote Originally posted by racer37: I have one to send, is there anywhere to find the directions to remove the ends? I can have ready to go next week. Shipping from ZIP 30534. Thanks, Scott

It's kind of a nasty job. I haven't seen any instructions posted of how to do it. but basically you gotta remove all the bands that are on the boots. Pull the boots back towards the center of the axle. Wipe away 3 tons of grease. Then with snap ring plyers release the snap ring on the outboard C/V joint & slide it off. On the inner tripot you got to open up the inner snap ring & move it towards the center of the axle a inch or so then release it. Then slide the tripot inner bearing rack inboard a little. That will expose the thin wire outboard snap ring. Remove it then slide off the bearing rack off then remove that you moved inboard earlier, then you can slide the boot off. Waste about 3 shop rags cleaning up all that grease you left everywhere & you're done.

I'll have to take some pics next time we take one apart.

Or you can just send the whole axle assembly here.

Archie

OK, I will look at that later this weekend, and I should be able to get an estiamte on shipping Monday. I will be in contact. Thanks, Scott

Bump again

Thanks

------------------

Sig by Custom2M4

I have one Archie. $35 total ok? I already have the ends removed.

bump

How much for them delivered archie?

ive got approx 7-8 of them i can bring with me when i have the funds together for the "limo"

matthew

How about $25.00 each delivered.

quote Originally posted by m0sh_man: How much for them delivered archie? ive got approx 7-8 of them i can bring with me when i have the funds together for the "limo" matthew

bumpo

Sent one off to you yesterday. Are these for a custom design or are these for OEM replacements?

Need more axles

Bump

quote Originally posted by Archie: Need more axles Bump

bump

.

[This message has been edited by JazzMan (edited 04-14-2009).]

bump

quote Originally posted by Back On Holiday: btw I hate to butt in and tell people how to ship these axles, but UPS will distroy them if you dont pack them correctly, I work for UPS and I know, so heres how I shipped mine:

That's a great packing job !! Just out of curiosity, has anyone tried to setup an account with UPS for the Forum ?? I mean there is soo many people sending eachother parts off Pennocks, it would seem reasonable...

Cheers

bump again