EDIT 4/02: No more shipping. https://www.fiero.nl/forum/Forum4/HTML/041804.html Once I make a scrap haul I'll try to get back here to edit out the parts I no longer have - if I still have internet access.

Hood (decklid) hinges. Both have good cables. $35 each
Decklid torsion bars for GT/wing. $35 both
'88 Coolant tubes. $25 each side
'88 AC condensors. $20
'88 Fan & shrould. $20
'88 Inner fenders. $20 each
'88 Fenders. $25 each
'88 Doors complete (non-electric - no interior panels). $60 each
Door skins. $25
Decklids. $50 notch w/holes filled (needs some blocking), $30 notch w/luggage rack, $150 fastback.
Engine louvers for notch. $15 each
Front clip sheetmetal (inner fenders cut near firewall, no frame rails) $35
Bumper reinforcements. $25
Eggcrates $20 '88 front standard, $40 front aero, $20 rear.
Coupe rear bumpers, smooth molding, $35 each.
Standard Rockers, $15 each.
Complete ground effects except 1 sideskirt, $80 for 7 peices - will seperate.
Grey seatbelts, $30 each.
AC & heater cores, $15 each.
Heater fan, $15.
Heater controls from dash, $15.
One *complete* '88 heater box assy, $50.
AC accumulator (aluminum tank), $10.
AC lines, several different ones tell me what you need.
Wiper motors, $20.
Auto pedal assy, $20.
Coupe taillights, $20 each.
'88 rear cradle, $150. SOLD
'88 rear control arms & forward links, $120.
'88 rear strut assys complete, $20 each.
'88 body wiring harnesses (engine harness gone), $20 - $30 (let me check condition).
Most everything for fastback conversion. I have roof section, decklid w/key, taillights, trunk blockoffs, driprails (SOLD), engine vents, inner sail trim. Don't have trunk rubber, sail windows, or louver brackets, & the R.taillight has a cracked cover. $450 Will sell taillights seperately.
'84 front suspension hub-to-hub (fully assembled w/frame rails) $65.
'84 rear suspension complete, $60.
'84 rear cradle, $50.
''84 econo 4-speed, $50. SOLD
'86 V6 fuel injectors w/fuel rail, condition unknown, $25.
'86 V6 throttle body & top of intake, condition unknown, $35.
Cruise vacuum device, $25.
The T-Top '88 base coupe, $1800/make offer.
'88 gas tanks, $50. both SOLD
'88 sending unit & pump 4 cyl., $25.
'88 side markers, fronts have faded markers, $10 fronts, $20 rear.
Grey 3-spoke steering wheel w/collumn, '84 I think (not GT), $60.
I still have ONE hood vent. SOLD
31k mile grey interior peices. More info here: https://www.fiero.nl/forum/Forum4/HTML/040070.html
Also still have some '84 Indy collectables, more info here: https://www.fiero.nl/forum/Forum4/HTML/040286.html
*** 12/18 Added parts FS:
Stock alloy wheels. Most have good tires, $25 each.
'88 notch sail panels, nice originals, $100 pair.

Can take pics. All items OBO + shipping. Obviously large and/or heavy items are hard to ship & therefore will cost more if it's even possible. I'm In N.E. Georgia near Commerce.

Will trade for (things I need for my other projects):
3.4 pushrod shortblock in good condition.
4.9 to go on my 4T60E.
SBC adaptor/parts to go on my 4T60E (can get Vortec engine).
18" 5-spoke wheels/tires.
Coilover setups for '88 (needed for 2 cars).
Pedal assy. w/clutch.
Brake upgrade for '88.
Plastic fuel cell, max size 18"x18"x11".
Fender flares 3" or 4" for VW Cabriolet (Rabbit convertible).
Fiberglass front fenders for VW Cabriolet.
Small block Mopar (340) rods, pistons, cam, for 8,000 RPM engine.
5 or 6 speed to go behind small block Mopar (for Datsun Z car) that will handle 500 HP.
Coilovers for Jag XJ.
*** 12/18 Added parts wanted:
Coilovers for '82 BMW 320i
15" alloy wheels for BMW, 4x100 w/20 offset (or less) (found some)

I think that gets most of them.
Edit: Email me at "imthadriver at yahoo". - I may not be checking here very often.
Thank you,
~ Paul
aka "Tha Driver"

[This message has been edited by Tha Driver (edited 04-02-2008).]

PM Sent

PM Sent

Trade 1 standard pedal assembly (87 Coupe) for DS front fender w/ground fx (grooved moulding), and transportation can be arranged. Thanks, Scott

quote Originally posted by racer37: Trade 1 standard pedal assembly (87 Coupe) for DS front fender w/ground fx (grooved moulding), and transportation can be arranged. Thanks, Scott

Hi Scott,
I haven't forgotten you had the pedal assy. but haven't taken the time to find your phone # yet.
It's a trade, except I don't have a groved molding. PM me or email me your phone # to save me some time. I'll do the same.
Thanks,
~ Paul
aka "Tha Driver"

nm

[This message has been edited by JCUOIT (edited 12-17-2007).]

PM sent (I think it went). Scott

quote Originally posted by JCUOIT: pics of the wheels please JC

The wheels are on the "wanted" list...
~ Paul
aka "Tha Driver"

I am interested in an 88 fuel tank. I am looking for one that does not have any rust inside and out and the baffels are still good. Does your have this? Also, how much to have it sent to 66071? you can email me at rustyboltz48@yahoo.com Thanks.

interested in the passenger side coolant tube and the 88 sidemarkers. do you have any aero front fenderwell liners?

email me at tnielson@verneide.com or civicduty13@yahoo.com.

[This message has been edited by civicduty13 (edited 12-17-2007).]

***** Added new parts FS & wanted (to top post).
~ Paul
aka "Tha Driver"

ive sent you a pm...ive got 3.4 shortblock and parts....

Hmm...I have a good 3.4 short block that's all cleaned up nice and painted, too bad you're too far away to ship stuff this big.

I need a sunroof glass that is not scratched all the heII. Got one?

------------------

My best advice when it comes to your Fiero is to "NOT" do any dealings with www.kitcarman.com
https://www.fiero.nl/forum/A...070315-1-061575.html <~ The drama with kitcarman
https://www.fiero.nl/forum/Forum2/HTML/078336.html <~ finishing and fixing kitcarmans mess
https://www.fiero.nl/forum/Forum2/HTML/079860.html <~ re-do after kitcarmans motor blew up.

quote Originally posted by JimmyS: I need a sunroof glass that is not scratched all the heII. Got one?

Sorry, no. I've decided to build the sunroof car as my custom. The Formula that I was building the custom body on is going to be the solo car. I may be trading the T-Top for a Shelby Charger.
~ Paul
aka "Tha Driver"

PM sent

One gastank is sold; still have the one coming out of the '88 Formula.
~ Paul
aka "Tha Driver"

Time is an illusion that serves purpose.

Im interested in the 88 cradle. I am doing a 3800SC swap and plan to build up the engine and tranny on a cradle and then do the swap. I would need to have the front engine mount, not sure what else. How much shipped to 85027? Thanks, Steve

------------------
Steve AT 88GTP DOT com
88 GT

PM SENT

quote Originally posted by Steve25: Im interested in the 88 cradle. I am doing a 3800SC swap and plan to build up the engine and tranny on a cradle and then do the swap. I would need to have the front engine mount, not sure what else. How much shipped to 85027? Thanks, Steve

Hi Steve,
Sorry I don't know of any way to ship something as big as a cradle to Arizona. Greyhound might work, but I'd have to drive 60 miles round trip to take it to them, & you'd have to pick it up at a station near you. You might try uship.com - Saxman was saying he found some great rates there for cradles & other large items.
Thanks,
~ Paul
aka "Tha Driver"

I really wish I didn't have a clutch issue to resolve with my fiero and a daily driver honda civic to get a door for or I'd be all over that scoop. It looks amazing so great work man and thats a very good price. Too bad I'm limited on around $300 and have 2 cars to fix before I can spend money on the looks again. I'll let you know if I still have the money after getting the door and clutch fixed because I really do want that scoop for my fiero.

quote Originally posted by FieroGuy9890: I really wish I didn't have a clutch issue to resolve with my fiero and a daily driver honda civic to get a door for or I'd be all over that scoop. It looks amazing so great work man and thats a very good price. Too bad I'm limited on around $300 and have 2 cars to fix before I can spend money on the looks again. I'll let you know if I still have the money after getting the door and clutch fixed because I really do want that scoop for my fiero.

Let me know. You see my partial wanted list for parts I need for all (or most of - LOL) my projects. Gonna cost me about ten grand to finish them all, then there are more to add to the list if I'm still alive. Can use all the cash I can get.
Thanks,
~ Paul
aka "Tha Driver"

If I had any of those parts I'd deffinatly trade for the scoop but I don't have any of the parts that are on that list right now. But I'll let you know. Maybe if I'm lucky you'll still have it when I've got the money.

What shape are the AC condensors in?

Any reason a 88 AC condensor wont fit on a 86 GT?

If they will fit I need two of them.

quote Originally posted by NeoNot: What shape are the AC condensors in? Any reason a 88 AC condensor wont fit on a 86 GT? If they will fit I need two of them.

You're in luck. I found an '84 & have the one out of my '88 & they are exactly the same. PM or email me (include your zip) & I'll send you my address & shipping costs. I pressure tested them with air & they're good-to-go. I can also take pics.
Thanks,
~ Paul
aka "Tha Driver

edit: email is ImThaDriver at yahoo

[This message has been edited by Tha Driver (edited 12-29-2007).]

I have a 87 v6 and am in need of a EGR flexable tube that goes between the EGR valve and Intake Manifold. Do you have one to sell?

quote Originally posted by Tha Driver: You're in luck. I found an '84 & have the one out of my '88 & they are exactly the same. PM or email me (include your zip) & I'll send you my address & shipping costs. I pressure tested them with air & they're good-to-go. I can also take pics. Thanks, ~ Paul aka "Tha Driver edit: email is ImThaDriver at yahoo

PM Sent.

quote Originally posted by TSpidel: I have a 87 v6 and am in need of a EGR flexable tube that goes between the EGR valve and Intake Manifold. Do you have one to sell?

Sorry I destroyed the tube when I removed the top intake. I can't remember why; I think maybe the exhaust side of it was rusted & wouldn't come apart (or had already).
~ Paul
aka "Tha Driver"

PM sent!

quote Originally posted by FieroGeneral: PM sent!

Pics sent via email.
~ Paul
aka "Tha Driver"

PLEASE NOTE: if you want something please PM me or email me at ImThaDriver at yahoo. I may not notice posts here for several days.
Later,
~ Paul
aka "Tha Driver"

P.S. thanks guys for the "+"s. I guess there ARE several people here who appreciate my help after all.

[This message has been edited by Tha Driver (edited 02-11-2008).]

hello, try jaguargraveyard.com, located in pa, cheapest place to get jag parts especially the older stuff...just thought that would help if you have trouble tracking stuff down to trade.

quote Originally posted by seegeer: hello, try jaguargraveyard.com, located in pa, cheapest place to get jag parts especially the older stuff...just thought that would help if you have trouble tracking stuff down to trade.

Thanks,
I need the Jag coilovers 'cause I have XJ suspension/rearend to go under the V8 Z car.
Later,
~ Paul
aka "Tha Driver"

One gas tank is gone, still have another one for now. Prefer local pickup on these as it took me about an hour just to make a box to ship it in, not including 1/2 hr. to get the cardboard, another 1/2 hr. to take it to the post office. :-(
Thanks,
~ Paul
aka "Tha Driver"

the drip rail look great.
thanks,
drake

PM sent

Last gas tank is spoken for.
Thanks,
~ Paul
aka "Tha Driver"

'88 cradle is gone. Email me if you need any of the other parts.
Thanks,
~ Paul
aka "Tha Driver"

PM sent

Last gas tank is gone.
Thanks,
~ Paul
aka "Tha Driver"