I'm getting away from fieros for a while. No time or money. Everything goes. if it's not listed, pm me and I'll get a price. remember to give your zip for shipping.
here's a short list
rear sway bar for 88. with all brackets. painted silver. Not rattle can stuff. It still shines. Includes poly end links. $100
Dash, two tone. no cracked corners. but there's a small piece broken around the speaker. Not noticable. Dash isn't brittle like most. $50
17x7 inch wheels. No idea what brand. I think the offset is 40mm. they are white. No centercaps. Tires are 205/50 and 215/50 front to rear. all are michelins. Fronts are Mich. pilot primacy. rears are pilot mxm4. similar tread patterns. fronts are a 5/32 rears are 6/32 tread. 10/32 is new. all are balanced. $250
kyb shocks and struts(88 only for front) $100 for the set. Less than 500 miles. Rears will include cut springs.
getrag 5 spd. works great. Painted silver. No play in diff. bearings. I added rodneys support bearings. Includes rodney's short throw shift linkage. although it's become rusty. $450
used shift and select cables. $60
120 cluster. $40. I have two of these.
let me know if you want anything else. There's too much to list. I'll be stripping the whole car of the next few weekends. Helping hands are welcome for discounts. suspension will be available later. It's all been rebuilt with new ball joints, lowered and poly all the way around. this car used to have a v8 in it, so I put it together with all the good stuff.
I'd rather not separate the air dam from the bumper.
quote
Originally posted by Hank is Here:
I may be interested in the engine wiring harness if it has ac and cruise control. I am not sure if cc is part of the engine harness.
Engine harness was originally for an auto, but I modified it. It has ac. but needs the speedo connector lengthened and at the c500 connection, you will need to bypass the starter solenoid wire thru the C500 junction. Not hard to do. I can go more in depth if interested. Price would be $40 plus shipping. the EGR vac solenoid connector needs re-spliced.
IP: Logged
10:37 AM
KissMySSFiero Member
Posts: 5542 From: Tarpon Springs, FL USA Registered: Nov 2000
I am interested in the seats if they are still for sale. If so how much would you like for them? I live in MD so the next question would be if they are shippable or not. My email address is spidelta@md.metrocast.net
IP: Logged
06:19 PM
Saxman Member
Posts: 5151 From: Melbourne, FL Registered: May 2005
I am interested in the seats if they are still for sale. If so how much would you like for them? I live in MD so the next question would be if they are shippable or not. My email address is spidelta@md.metrocast.net
I am buying parts from KissMyFiero and my dad is bringing them up to Waldorf. I sent you a PM if you want to work something out. It won't be free, but it might be safer than shipping.
IP: Logged
10:20 PM
Mar 23rd, 2008
MusicmanNE Member
Posts: 77 From: Fremont Nebraska, USA Registered: Sep 2007
I'm also interested in the front air dam, but I'll take the whole front bumper cover with the air dam mounted as a unit, if you prefer to sell it that way. (depending on price) Anyone who's already expressed interest in the air dam should get first refusal, of course.
Will you be coming to Daytona?
IP: Logged
03:36 PM
kyote Member
Posts: 1232 From: Germantown, Wisconsin - Metro Milwaukee Area Registered: Sep 2001
Sorry for the delay on responding the all the PM's I've had. I just bought a house and I'm in the middle of a move. I'll try to respond tomorrow or thursday. thanks Joe
IP: Logged
10:37 PM
Mar 27th, 2008
PePe-LePu_For_2 Member
Posts: 283 From: San Ramon, CA, USA Registered: Jun 2005