I'm trying to clean up the place and I've got a bunch of "spare" parts that I don't really need, hopefully you guys can put this stuff to use. All prices below include UPS ground shipping, if you're close to Portland and want to pick them up, obviously I'll take some off the price. All of these parts worked when removed, the engine parts were pulled to make room for a Northstar (and are a bit oily, I'm glad to have that leaky 3.4 pig out!), the chassis parts are from a car that went to the scrapyard.
'88 V6 AC compressor mounts - $25 shipped
V6 valve covers, stripped and painted black - $25 shipped
'88 V6 dogbone mount - $20 shipped
'88 front harness, and headlight relays - $50 shipped (headlights/motors already sold), good for converting pre-87 headlights to later motor style
'88 V6 fuel rail, pressure regulator, and hard lines - $25 shipped
Camaro 3.4 heads (identical to Fiero 2.8 heads, IIRC) - $40 + shipping These heads were removed from my 3.4 that had piston ring issues, no damage to the heads, never overheated or resurfaced. Always stored indoors, I just put them on the concrete to take a picture. The copper color on the gasket surface isn't rust, it's copper spray and head gasket material.
Bump...I knocked the prices down on most of this stuff to the point that it's basically free + shipping. I don't want to throw this stuff out, but I'm in spring cleaning mode and I don't want this collecting dust. Somebody save this stuff from the dumpster.
Hey Nashco- I hunt here often for parts. Sometimes people have tons of parts, but their offering is busy to read and not maintained. The way you laid out, displayed, and updated the status of your parts is really easy to see what you want and if it still available.
Good Job
IP: Logged
03:44 AM
Jun 5th, 2008
sjmaye Member
Posts: 2468 From: Hendersonville, TN USA Registered: Jun 2003
Looking for the 2 metal vacuum/vapor lines that run underneath the battery to the expansion tank in the rear passenger side fender well. Mine are rotted. Need some good ones. Got any?
IP: Logged
08:09 PM
Jun 6th, 2008
Nashco Member
Posts: 4144 From: Portland, OR Registered: Dec 2000
Looking for the 2 metal vacuum/vapor lines that run underneath the battery to the expansion tank in the rear passenger side fender well. Mine are rotted. Need some good ones. Got any?
I'll check it out, I'm pulling a couple other parts so I'll be in there anyway.
Bryce
IP: Logged
02:11 PM
sjmaye Member
Posts: 2468 From: Hendersonville, TN USA Registered: Jun 2003
While you are at it, do you possibly have the engine bay insulation on the battery side(passenger)? Good condition, not torn or cut? If you had the drivers side in similarly excellent condition I could use it.
IP: Logged
08:15 PM
Jun 10th, 2008
Nashco Member
Posts: 4144 From: Portland, OR Registered: Dec 2000
While you are at it, do you possibly have the engine bay insulation on the battery side(passenger)? Good condition, not torn or cut? If you had the drivers side in similarly excellent condition I could use it.
Insulation on a 20 year old car that comes off the car in one piece and also hasn't suffered previous damage? HA, that's a good one!!!
quote
Originally posted by sjmaye:
Hey Thanks!
Just let me know . My are about rusted through.
Sorry man, not worth the hassle on these tubes, plus they look like a pain to ship. It looks like you could bend some pretty easily if you got brake tubing from the parts store, maybe swing by your local Napa (or whatever) and try to find some tubing the same size? Good luck.
