I have one of the tail lights from driven visions before Joe passed. Its not been installed just test fitted once have painted it black but could easily painted another color. I have a pic pre paint if anyone wants it I will email it as its too large to pip. Looking to break even at 225 plus shipping. Again new and wont be available from driven visions anymore.

bump

Will take partial trades on stock or possible other taillight mods. Nothing wrong with unit just changed mind. Stock lights needs to be in good condition.

[This message has been edited by linuxpowered88 (edited 07-19-2008).]

do you have piks of what it looks like? forgive my stupidity. thanx skoon

------------------
84 gt project
86 gt project
84 daily
The junk yard is my zen garden
Future build "Ghost of Indy" i hope

here here. pic would help. i can't find what these look like.

------------------
1984 Red Fiero SE #9382
2.5L Iron Duke / 125C Automatic

PM's and emails sent.

i am curious as to what this tail light looks like. email is americasfuture2k@yahoo.com

------------------
1987 Fiero GT built by my brother, merlot566jka, 3500 LX9 from 06 Malibu, WOT-TECH.com 1280 grind stage 3 cam, LS6 valve springs, 1227730 ECM conversion, Darrel Morse solid aluminum cradle mounts, Truleo headers modified to fit the 3500, 36# inectors, 70mm 4.3 throttle body adapted to 3500 intake, ported heads, upper and lower intakes, lightly polished, tcemotorsports.com crank trigger wheel, CenterForce dual friction clutch, Flowtech Afterburner muffler, 2.5" piping, cat deleted, EGR deleted, SinisterPerformance tuning, C6 Corvette exhaust tips. projected to be 35 MPG with a guesstimate of 250 hp to the wheels

Email sent

IMO these are some of the nicest looking taillights that were ever made for the notchback. However, I thought that the young guy that was making them passed away a couple of months ago. If someone has acquired the molds, I would probably be interested in a set myself.

------------------
87GT - 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles
87GT - 3.4L Turbocharged engine, modified TH125H
" I'M ON THE LOOSE WITHOUT THE JUICE "

He did pass away I bought the last set before he passed. I do not have the molds but a mold could be made easily. The light elements look pretty easy to come by and the mold is not complicated at all.

Could you email me pictures of them?

Sold

every thing went good!! got my tail ligths