I found a few more at the yard. $10 I pay shipping
http://img396.imageshack.us...4456/dscn5481yy5.jpg
I borrowed the pic, they look just like this though
Aaron

you have a PM

------------------

Romeoliquorstore.com
Myspace

I'll take two. Got PayPal?

Paypal to: arw62@aol.com

1 for $10
2 for $19

Pm sent.

As of right now I have 3 left.

[This message has been edited by Electrathon (edited 08-19-2008).]

PM sent

If everyone come through they are all gone. I will know in a couple days.

I might get a new one since I cracked the other one when I attached it. If you run across more let me know please.

(that's my car in the pic BTW)

quote Originally posted by ShockWave: I might get a new one since I cracked the other one when I attached it. If you run across more let me know please. (that's my car in the pic BTW)

One that I sold you cracked? If so, I am sending you one no charge.

quote Originally posted by Electrathon: Paypal to: arw62@aol.com 1 for $10 2 for $19

Sorry for the delay. Forgot about this thread completely.
Payment for two covers sent.

Thanks!

quote Originally posted by Raydar: Sorry for the delay. Forgot about this thread completely. Payment for two covers sent. Thanks!

It will go in the mail tomorrow.

Just got mine today. Thank you much!!

I got one of these in a yard, but does not fit snugly on the EGR. Maybe my aftermarket EGR is a tad smaller in diameter. Anyone else have that problem? If so, what did you do to get it to fit correctly?

quote Originally posted by sjmaye: I got one of these in a yard, but does not fit snugly on the EGR. Maybe my aftermarket EGR is a tad smaller in diameter. Anyone else have that problem? If so, what did you do to get it to fit correctly?

If you have an aftermarket EGR valve it likely will not fit correctly. If that it the case, put a dalop of silicone on the top of the valve and set the cover on. When it dries the silicone will keep the cap in place and if you need to remove it you can with a little wiggling.

Mine showed up yesterday.
Many thanks!

I have 3 more that I found today. I'll bet I looked under the hoods of at least 400 cars at two yards. These are getting harder and harder to find.

quote Originally posted by Electrathon: I have 3 more that I found today. I'll bet I looked under the hoods of at least 400 cars at two yards. These are getting harder and harder to find.

PM sent for all 3

Looks like they are all gone.

quote Originally posted by Electrathon: If you have an aftermarket EGR valve it likely will not fit correctly. If that it the case, put a dalop of silicone on the top of the valve and set the cover on. When it dries the silicone will keep the cap in place and if you need to remove it you can with a little wiggling.

Nice trick. Thanks, Electrathon.

I found one more of these covers at the yard. $10 paypal gets it.

once again, one more