I have 2 84 (1 automatic and 1 with 4.10 4 speed) and 1 85 (4cyl 5 speed) parts cars mostly complete also have some 88 GT parts for sale. If anybody needs anything I will see if I have it. I dont have alot of spare time so it may take a day or 2 to get back to you but I will respond if you need it quick let me know and I will do my best to respond quickly. I also have a 86 GT with a 3.1 and 4 speed that I am going to sale it needs work but will run just not stop too well I will probably fix most of the problems before I sell it it but if anyone makes a resonable offer it can be bought as is right now if intrested let me know and we can discuss options. I will also listen to offers on all or any part of the collection. Everything is located in Clover SC (29710) about 30 mins SW of Charlotte NC or 15 miles from interstate 85 Kings Mnt. exit Hwy 161. Cars may be able to be delivered for a resonable charge.

How are the floor boards in any of them? I need to fix a small hole in the passenger floor of my 86

what do you got for the 88 GT ,looking for some beechwood interior parts ,good non cracked dash,emergency break trim cover ,dot matrix ,shirfter surround and radio surround in dot matiix.

the 88gt has grey interior but not much left of it. Most of the interior stuff in all the cars is pretty rough.

I need the computer and the engine wiring harness for that 84 with the automatic tranny. PM me a price and shipping to 04614. Thanks. John

------------------


Project88GT build up thread

How much for the 4 spd shipped to 44430?

how much for the drivers side 1/4 window on the gt? also the trunk seal?

thanks
=todd=

I am not to sure about shipping the tranny I will see what I can figure out and let you know.

the GT quarter windows are cracked and the trunk seal is gone.

Gooch and fiero67 you have pms

pm sent back to you

I need a 5-spd shifter assembly. Got one?

I have one out of a 85 with the 5speed isuzu trans if that will work

I need a oil pressure sending unit off one of your dukes i was wondering of you have one thats good, what would you want for it and how much is shipping to Kansas city MO 64015?
edit Pm me a price please

[This message has been edited by Four_hundred_86 (edited 11-16-2008).]

interested in the front inner fenders from your '88GT if they are in good condition.
Thanks

Do any of these fieros have tan interiors? Thanks

------------------
Thank for the sig. Bobadoofunk
1984 Fiero Sport Coupe
1988 Buick Reatta
1990 Buick Reatta
1993 Grand Prix LE

[This message has been edited by 1984whitesc (edited 11-17-2008).]

I think the pass side inner fender is good but I think the left side is torn at the bottom I will look again and make sure and let you know.

the 84's both have tan interior but not much of it is any good what parts do you need?

Dave do you have a oil pressure sending unit you wouldn't mind parting with?

Does the 88 GT have a rebuildable slave? Is the right rear wheel well liner in good condition? Prices? Thanks.

Front chin spoiler for a '88????

the slave is gone i think the wheel liner is good but will have to check and make sure and if it is I will have to check on shipping it doesn't weigh anything but is kind of big so I will have to check on that too

the chin spoiler was broken

Four_hundred_86 you have a pm

[This message has been edited by superdave69 (edited 11-18-2008).]

Let me know when you check on the wheel well liner. Thanks.

quote Originally posted by superdave69: I think the pass side inner fender is good but I think the left side is torn at the bottom I will look again and make sure and let you know. the 84's both have tan interior but not much of it is any good what parts do you need?

I am in need of two seat bottoms and the passenger side top seat cover. Are any of them good?

Edit: I forgot to ask how much would it be for the wiring harness for the speakers in the seat. I would need everything from the seat to the back of the radio.

[This message has been edited by 1984whitesc (edited 11-19-2008).]

Any update on this?

I will have to check the wiring harness to hte seat speakers I think it is good but will look at it tomorrow and let you know, dont have any good seat covers that I am not going to use right now.


I have 2 rr wheel well liners one off of the gt and one off of a coupe not sure which is which the staples that hold the 2 halves together are coming out of one but the other is good. I am almost positive the GT one is the good one. Will try to figure out which is which tomorrow and let you know if it is good I will take $10.00 plus shipping for it.

You have a PM.

quote Originally posted by ALLTRBO: You have a PM.

you have a pm now

the engine,transmission,cradle,and all rear suspension is gone

Passenger power mirror?
Passenger Quarter panel round molding piece?
Passenger Quarter panel Ground effect piece? Prefer 87 silver/grey

Drivers side power mirror?

Do you have a Trunk release/rear defogger switch plate? If so I am interested in that.

Thanks,
Mike

How much you wanting for the 86 GT with a 3.1 and 4 speed?

Do you have the 88 headlight wiring harness? How much to 75024?

Michael

pass. side power mirror $45.00 shipped no quarter panel molding or ground effect

drivers side power mirror $ 45.00 shipped

trunk release defogger switch plate will have to check again but dont think I have one.

would like to get around $ 1200.00 for the 86 GT but thats negotiable

the 88 front light harness has been butchered to death at the headlights

How much for the '88's instrument cluster shipped to 34746? Please be sure it is the '88's 'casuse I am doing a project and need that specific cluster.

Thanks

the 88 cluster is gone

got the wiring and ecm yesterday. Thanks. John