I am offering my 1998 GTP 3800 SII SC motor that has only 7000 miles since a complete rebuild. It was originally purchased with 56k miles. A 25yr GM veteran mechanic did the rebuild.
Original cost of the used motor = $1500
XP cam = $350 (another $250 for installation and new bearings)
Oil pump = $89
Rod bearings = $95
2.5" Spintek catback exhaust (1200 miles since new) = $550
Stage 4 ported and polished blower (mirror exterior finish) = $750
MPS = $150 currently running a blue anodize 3.25" pulley with 0KR
Ported intake manifold = $100
LS1 TB kit = $250
Filled and painted valve covers by FieroX = $85
OR Pushrods w/ 105# springs installed = $250
Blue Taylor 8.8mm wires = $85
Rebuild kit w/ labor = $850
Roughly $5500 invested, asking $2800.
4T65E-HD tranny
-hardened 4th gear
-stronger blue clutches installed
-Gen 1 limited slip differential (eliminates failure from 1 wheel burnouts, but I have never done a burnout)
I've been to the track twice totaling 6 passes. The first few were before the LS1 TB and upgraded blower. I ran a 12.6 @ 107mph on street tires. I have heavier brakes, front slalom suspension, and audio components so a stock Fiero should run much faster.
Asking $1100
The reason that I am selling is because I want to build a motor from scratch, and it would be wasteful to tear a perfectly built motor that puts down roughly 300-310hp to the wheels purpose built to daily drive and have a fun spirited drive without eating/destroying bone stock 4T65E-HD trannies.
I can knock some off for an immediate purchase. If you want both, I will cover the shipping anywhere in the US or you can pick it up for $3500. It is currently installed, but will be un-installed within the next month or so.
More pics and info will be added soon.
------------------
[This message has been edited by FieroGTguy (edited 11-22-2008).]