Spring cleaning time and I am unloading my extra shifters. I have 4 shifters that have been modified to be 2 1/4" shorter than the stock Isuzu height (3/4" between the bottom of the shift knob and the shifer base). The threads have been extended so you can make it even shorter by cutting material off from the top. I would like $40 shipped for these 4 shifters. Any that do not sell by the Fiero Factory Swap Meet, I will bring there (so if you want to save $5 for shipping, I can deliver them to you at the swap meet).
For those who want to make their own, I have 6 pieces of threaded shafting to make short shifters (metric pattern for stock Fiero knobs). Depeneding on placement you can make the shifter 1 1/2" shorter or greater depending on where this is welded. You could even cut it shorter to have a really short shifter. $8 shipped for these, or $5 and I will bring them to you at the swap meet.
When these are gone, I am done messing with short shifters... just trying to clean up the garage and generate some spare $$$ for my other projects.
Paypal is prefered - fieroguru@lycos.com
[This message has been edited by fieroguru (edited 04-19-2009).]
IP: Logged
03:18 PM
PFF
System Bot
Frizlefrak Member
Posts: 2921 From: El Paso, Texas Registered: Aug 2003
You mean the whole assy with short shifter arm and the base that mounts to the chassis and connects the cables? If so, then $50 shipped to help cover the increased shipping.
IP: Logged
07:19 AM
fieroguru Member
Posts: 12305 From: Champaign, IL Registered: Aug 2003
Text says for Isuzu shifter. I have an 87 5speed Getrag. Will these work for this?
Yes, they will work for all shifters (Muncie, Isuzu and Getrag) - the reference to Isuzu was for the stock height comparison... It was one of the few stock shifters I had left available to measure.
IP: Logged
07:12 AM
fieroguru Member
Posts: 12305 From: Champaign, IL Registered: Aug 2003
If the shifters are not spoken for by 6AM EST on Friday, they will go to the Fiero Factory Swap meet with me and to be sold there. I probably will not have email access from Friday morning till Monday morning. If there are any left over after the Swap Meet, I will provide an update of how many still available.
IP: Logged
07:17 AM
whodeanie Member
Posts: 3819 From: woodstock,Ga.,USA Registered: Jan 2008
If the shifters are not spoken for by 6AM EST on Friday, they will go to the Fiero Factory Swap meet with me and to be sold there. I probably will not have email access from Friday morning till Monday morning. If there are any left over after the Swap Meet, I will provide an update of how many still available.
Bring a shifter for a 4 speed with you and I will take it off your hands. I will be there sat. Dean
IP: Logged
10:54 AM
fieroguru Member
Posts: 12305 From: Champaign, IL Registered: Aug 2003
