Also, I have read a few threads on this subject, but nobody really posted a definite answer. I need some bolts to attach my machined F body flywheel to a 3800SC as well as bolts to attach the pressure plate. If anybody has any of these or can steer me in the right direction I would appreciate it.
-Joe
IP: Logged
01:00 AM
PFF
System Bot
carnut122 Member
Posts: 9122 From: Waleska, GA, USA Registered: Jan 2004
I believe I have the slave bracket you're looking for if the pm from above doesn't have it.
I also have a set of new Rodney Dickman cables, but I'd be reluctant to let those go- I'm sure as soon as I did, one of mine would seize up on me, lol!
-Gary
IP: Logged
03:08 PM
joesfiero Member
Posts: 2181 From: North Port,FL,USA Registered: Jan 2008
carnut has the SHIFT cable only, still need the select cable and slave bracket. Fierofanatic I will PM you. Others, keep sending info, I need to gather this stuff quickly.
-Joe
IP: Logged
10:01 PM
Jul 30th, 2009
joesfiero Member
Posts: 2181 From: North Port,FL,USA Registered: Jan 2008
I also now need: the two nipples that come from the accy tensioner/alternator bracket from a 99+ GTP with the bolts that hold them on. the bolts that hold the SC onto the LIM An oil pickup tube from a 3800 with the ALUMINUM oil pan the 6 rib SC belt idler pulley thats attached to the large cast iron bracket AND the bolt that holds it on probably more to come
TIA
-Joe
IP: Logged
10:57 PM
Aug 4th, 2009
joesfiero Member
Posts: 2181 From: North Port,FL,USA Registered: Jan 2008
