just took out my sunroof hardware, to investigate a leak, and found that everything is in just awful condition. i may be able to make due without the clips, but the hardware is a must. if anyone has any extras, i would appreciate it. thanks.

I used the Fiero Store's one piece seal and hardware. They have worked very well. However, I noticed that the rear of my glass is more curved than the Fiero's roof. It's still got a 1/8th inch gap, however, leaking is down 90%. Maybe the glass is poor aftermarket piece.

i was looking at that and i was wondering how a plastic washer could work, though... although it must better than the no washer on there right now. do you think an o ring would do better, or do i need that washer?

bubump

I found some rubber washers at my local Ace Hardware store that stopped my leaks (on my 88 formula) from the bolts that go through glass. That gasket was good. I have not been able to keep my 86 from leaking no mater what i do.

Do you need these?



Sparx22

i dont quite need the whole shebang, my clips are relatively in good shape, and the adjuster is perfect. im just looking for the female end of the clip hardware. i suppose now that i think of it though, im probably better off just getting them from the fiero store.

hey guys, just wanted to let you know, im gonna start giving out more ratings to people who help me out a bit! i gave everyone in this thread a "+" for good advice!