been working on the custom again upgrading parts so I have a few nice parts to sell because I am tired of triping over them.
so here is the list.
D.
all prices are for the part not including shipping.

(SOLD) 1 pair front spindals used from my 88 custom with dust shields and good bearings 80
1 set front callipers 88 painted red 70
1 set rear callipers 88 painted red 70
(SOLD) 1 set front upper A arms 60
(SOLD) 1 set front lower A arms 60
all 6 rear links 88 80
1 set stock front springs 88 Forumula 20
1 set stock rear springs 88 Forumula 20
2 sets top hats for 88 rear struts great for coilover setup or stock 20 ea. set.

all parts are in good shape no rust.
the suspension parts need new bushings installed, if you buy them I can burn out the bushings, blast them and POR15 them for you
for 15.00 each part but it will add 2 days to the ship time.
PM me with any questions.
Dean

[This message has been edited by whodeanie (edited 09-23-2009).]

I got a friend who has been looking for stock '88 springs (his were cut). I emailed him this thread

I am interested in the front spindles. Shipping would be to Nova Scotia, Canada, B0N 2A0.

quote Originally posted by Rolling Thunder: I got a friend who has been looking for stock '88 springs (his were cut). I emailed him this thread

Thanks

BON 2A0 would be the postal code. Basically the same thing as a ZIP code.

I'll take these:

1 set stock front springs 88 Forumula 20
1 set stock rear springs 88 Forumula 20
how much shipped to 53072?

Thanks!!

------------------
1985 Fiero GT All Options
1988 FIERO Coupe "IRON DUKE" 5-Speed (the show car ;-)
1992 Firebird T-Tops V-8 24k original Florida miles(collectors car)

Dean,
PM sent on the upper and lower control arms.
Tom

all PM's responded
anyone else?
so far the A arms have been spoken for and maybe the springs not solid yet.
D.

i need a 88 dogbone cover. can ya help me? pm me if you can. thanks!

quote Originally posted by winger1955: i need a 88 dogbone cover. can ya help me? pm me if you can. thanks!

not on that one none of mine had them when I got them.
D.

Hey Dean, how much for just the rear adjustable links sandblasted and bushings burnt (no por 15, i'll powder coat em)? do they spin freely for adjustment? Both my sets are a bit rusted solid and won't spin, and I need an alignment on the car...

If the spindles are not sold to my fellow countryman, PM me price including shipping to Canada G7J4P6.

I dont need the dust shields.

------------------
"I'm not driving too fast, . . . I'm just flying too low."

4.9 ongoing project

PM sent. Working 12 hour days this weekend. Sorry for the slow response.

quote Originally posted by Xerces_Blackthorne: Hey Dean, how much for just the rear adjustable links sandblasted and bushings burnt (no por 15, i'll powder coat em)? do they spin freely for adjustment? Both my sets are a bit rusted solid and won't spin, and I need an alignment on the car...

PM sent.

PM sent

bump for anyone else needing parts

PM sent, money on the way.

Thank you for the parts and an extra thank you for your help with UPS. Its a lot of "peace of mind" knowing that I now have two wheel bearings (complete hubs ) if or when mine wear out. I have had other good transactions but you have done far more than others have had too to ensure a good transaction. Thanks again.

Dean, if the springs aren't sold, I'll take all four of them.
Tom

[This message has been edited by carnut122 (edited 10-23-2009).]

pm sent for rear links. Chris

rear calipers sent to 61265?