******** 3 days left before crushy crushy **********
I have a chassis from an '86 SE that has no rust through anywhere and is a good solid chassis. Even the trunk corners have no rust!!! Solid floors and everything!!! The car is still a roller and has all wheels and tires still on it, as well as some usable parts left on it if you want them. The way you see this car in the pictures is the way you get it. It still has a 4-speed trans in it as well as some of the 2.8 left. Please come take this off my hands! If nobody shows interest in the car within the next 3-5 days, it is going to the crusher. I DO NOT want to send a solid chassis to the crusher, but I have no choice. There is slight damage to the driver's side rocker panel that looks like someone tried to jack it up there, but it is easily repaired, or doesn't have to be, as it does not affect body panel attachment. Please come use this car to keep yours on the road! PM me to discuss or to get my phone number if you would rather talk by phone. Either way, by Feb 2nd, this car will be gone.
[This message has been edited by Hulki U. My-BFF (edited 01-30-2010).]
Of course he broke it, why do you think I'm giving the chassis away? This was a mint condition low mileage perfect 86 SE before PK got his hands on it!
Never mind. Did a quick google map and looks to be over 7 hours.
Don't be scared, 7 hours for a FREE good chassis with lots of parts still left on her. Remember we live in the rust belt, and good frames are hard to find.
IP: Logged
06:29 AM
Hulki U. My-BFF Member
Posts: 5949 From: Back home in East Berlin, PA Registered: Apr 2008
Don't be scared, 7 hours for a FREE good chassis with lots of parts still left on her. Remember we live in the rust belt, and good frames are hard to find.
I don't need it though, I was just interested in saving it from the crusher, but not bad enough for two 7 hour long road trips.
IP: Logged
10:36 AM
Hank is Here Member
Posts: 4452 From: Hershey, Pa Registered: Sep 2000
Damn dude im starting to really want the transmission out of this
Another member wanted it too, but I am not taking the time yank this trans, when it is in the 20's outside in my driveway and there's no guarantee that this trans is worth a damn. If I had a garage it would be a different story.
Want to send me a lugg nut and the bolt off the blower fan tube in the engine bay? I'm too damn lazy to go to the store and spend 10 cents on a nut...I will cover shipping.
IP: Logged
05:01 AM
Hulki U. My-BFF Member
Posts: 5949 From: Back home in East Berlin, PA Registered: Apr 2008
Want to send me a lugg nut and the bolt off the blower fan tube in the engine bay? I'm too damn lazy to go to the store and spend 10 cents on a nut...I will cover shipping.
I'll make you an even better deal. I'll send you the whole car, you cover shipping. A single lug nut? Are you kidding? Yes 'tuzzi, I will send you a lug nut, and a bolt off the tube. Cheap a$$.
IP: Logged
08:00 AM
Hulki U. My-BFF Member
Posts: 5949 From: Back home in East Berlin, PA Registered: Apr 2008
Ill speek for it. I was there helping hulki to strip down the car and it is a clean frame.
Hulki.... why did I get 5 picture mail messages from PK86 on thursday of a mans behind? I told you not to bend over in front of him, and to have your wife around when he was there, Females are Krytonite to him!
IP: Logged
11:43 AM
katore8105 Member
Posts: 1519 From: Upstate NY US Registered: Dec 2009
Want to send me a lugg nut and the bolt off the blower fan tube in the engine bay? I'm too damn lazy to go to the store and spend 10 cents on a nut...I will cover shipping.
What. I spent $2.50 ea on lug nuts. Where can you get them for 10 cents
PK if I flew you to Australia and back, do you reckon you could make my old Boss's BMW X5 look roughly in the same condition overnight? You're welcome to spend the rest of the week lapping up the sun on Surfers Paradise beach.
Weather for Brisbane QLD, Australia 8:49 PM 77°F | °C Current: Mostly Cloudy Wind: E at 21 km/h Humidity: 78%
The Bi-polar Kiwi (New Zealander) who fired me 3 times from my dream job, had one of his staff who I have remained in contact with phone me, to ask me if I would be interested in coming back. Seems they haven't been able to replace me, funny though, I haven't been able to forgive him..
Oh sorry, this isn't the off topic Fiero owners self help forum?? Sheesh
Very generous of you to give away that Body Hulki... if only (even at 50) Elle would give me hers...
[This message has been edited by Rixthetrick (edited 01-31-2010).]
IP: Logged
05:56 AM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
Just wanted to thank you once again for the chassis Andy. I now have a smooth, tight shift pattern on my car due to the selector shaft pin and bracket I got from your donor. My windshield washer is working great. I drilled out the rivets on the sunroof rubber mounting rails and they look like they'll be fine, and my Dad has a like-new heater core. I plan on using the windshield and the body panels you gave me as well as the suspension that I originally wanted the car for.
It was good to meet you and see what you were working on. That dash conversion on your GT is something I never even thought of and It's cool to see other people's projects under construction. Thanks for taking the time to help me load it up and thanks for being patient as it took longer to do anything last weekend due to the storm. I had everything planned out ahead of time but all of my plans fell through. From the original winch trailer I was supposed to have, to U-haul being way behind schedule when I had to rent one.
If you ever need anything that I may be able to help you out with don't hesitate to call.
Thanks again, Jerry
IP: Logged
11:44 PM
Birddogg1 Member
Posts: 39 From: Cherry Tree,PA USA Registered: Dec 2009
Just wanted to thank you once again for the chassis Andy. I now have a smooth, tight shift pattern on my car due to the selector shaft pin and bracket I got from your donor. My windshield washer is working great. I drilled out the rivets on the sunroof rubber mounting rails and they look like they'll be fine, and my Dad has a like-new heater core. I plan on using the windshield and the body panels you gave me as well as the suspension that I originally wanted the car for.
It was good to meet you and see what you were working on. That dash conversion on your GT is something I never even thought of and It's cool to see other people's projects under construction. Thanks for taking the time to help me load it up and thanks for being patient as it took longer to do anything last weekend due to the storm. I had everything planned out ahead of time but all of my plans fell through. From the original winch trailer I was supposed to have, to U-haul being way behind schedule when I had to rent one.
If you ever need anything that I may be able to help you out with don't hesitate to call.
A single lug nut? Are you kidding? Yes 'tuzzi, I will send you a lug nut, and a bolt off the tube. Cheap a$$. 
