I've had this stuff hanging around for a while, and now that my swap is almost done, I know I don't need it. Here is what I have:
New V8 Archie aluminum adaptor plate (SBC to manual tranny); has one corner cut off, but should still be fine to use.
New flywheel for SBC with one-piece rear main seal (ie, 1986 or newer); some surface rust.
Used clutch for swap; has some light surface rust on one small area of pressure plate, plus some dings in the cover plate (looks like something let loose in the bell housing and rattled around). Disc is used but looks good.
$180 for all of it. I have pictures of it all and can send them to you with a more detailed description of each part if you give me an email address.
Shipping: Pick it up, or I can deliver it within about an hour of Toronto/Mississauga and it is of course free. To Canada it will be around $55. To the US, around $110. It of course depends where you are. The package is about 22"x16"x12" and weighs 68lbs; might be a little under, but this is a safe size/weight for shipping estimate. It would be coming from Bolton, Ontario, L7E 3M5.
