If you have any, please let me know. I'll keep updating this list as I iron out what I need (almost done).


Any year:

Lower radiator air dam (aero only) (HOT!, or COOL!)
Lower sideskirt pieces of ground effects, aka rocker panels? (both sides, in good shape, less urgent)
**Bought** Brake pedal cover, the rubber part (manual only)
**Bought** Getrag clutch fork lever
**Bought** Manual tranny axles, left and right (HOT! ...In good condition only)
**Bought** Various Getrag shift linkage pieces and brackets
**Bought** 60v6 bellhousing to engine bolts
**Acquired** Getrag tranny to engine dowel pin (x1)
**Bought** Fiero Warehouse lower quarter panel scoops, or similar
**Bought** GT rear fascia, fully intact (local only please)
**Acquired** 60v6 flywheel bolts


'88 specific:
'88 Parking brake caliper brackets (apparently to hold the cables in place... I haven't seen what they look like) (HOT!)
Front inner fenders, aka wheel wells (aero only) (HOT!)
**Bought** Rear suspension mudguard pieces for the inner fenders, aka wheel wells
**Bought** Bolts and nuts from any or all of rear suspension, inc. cradle
**Bought** Engine mount bracket from a 2.8
**Bought** Aftermarket rear struts, new or almost new (not '88 specific?)


Non-Fiero:
One more GSX-R 600 cooling fan (hey, doesn't hurt to try)
Big honkin' W/A IC (A real one, not Ebay China junk)

**Fabricated** Any Gen II A/C compressor bracket (HOT!)
**Bought** Gen III 60v6 starter (HOT!)
**Bought** Gen II 60v6 AC compressor (HOT!)
**Bought** Gen II 60v6 alternator (HOT!)
**Bought** 42 lb/hr injectors (x6)
**Bought** One more stock 2G DSM IC (hey, doesn't hurt to try...<see?)
**Bought** 1 more Volkswagen "Monte Carlo" or "Santa Monica" 17x7 wheel and 2 center caps (ditto)


I have FOR TRADE for any of the above:

2.8 lower intake manifold, painted blue
2.8 middle intake manifold, painted blue
2.8 fuel rail w/ injectors
2.8 exhaust crossover (I need to check condition)
2.8 air filter housing and lid (surface rust)
2.8 intake snorkel
Other stock odds and ends
**Gone** 2.8 exhaust manifolds

[This message has been edited by ALLTRBO (edited 05-27-2010).]

I have the front inner liner.
sparx22
https://www.fiero.nl/forum/Forum4/HTML/043887.html

I'm looking for both of them, that would probably be easier on shipping. I'd prefer them without cracks/breaks too. Thank you for the heads up, though. Much appreciated.

I have a GT rear fascia or two in the shed. I'll check on the condition tomorrow, (Sat.) and send pics if you want. Doug

Sorry...its a WTB and not FS... lolll

[This message has been edited by perry rhodan (edited 09-05-2008).]

Doug, sure. Don't go out of your way for pics just yet, my friend may have one available, I need to talk to him again. Just let me know if yours are in good condition, and how much you'd want.
Thanks a lot.

I figured that with a list that long, I might be able to help you out. My shed is filling up with parts.

Let me know if you need anything else. My collection of parts is finally bigger than my collection of Fieros!

PM with price and pics sent.

PM sent.

Both PM's replied to.
Thanks guys!

PM back atcha.

BTW Saxman, I'll sure keep you in mind when I find out everything else I need. Thanks for checking!

Bump.

PM sent.

PM sent back.

Bump!

PM sent.

Updated, now with items I have for trade!

Bump

ou still have the scoops?

WTB = Want To Buy

PMS!

("Private Message Sent")

(What were you thinking?)

PMR!

("Private Message Replied")



Thanks Bruce!

P.S. I gave you your first trader rating.

[This message has been edited by ALLTRBO (edited 09-20-2008).]

Excellent! Thanks for everything!!

Good luck with the hunt for the rest of the stuff you're looking for and remember to post pics of the project when you're ready!

PM Sent

PM Replied. Thanks!

FTF, sure thing... when I'm ready. Thanks for the scoops!

[This message has been edited by ALLTRBO (edited 10-06-2008).]

Bump...
Still pluggin' away, I updated the (dwindling) list because I need a front engine mount bracket (just the bracket) from an '88 2.8 ASAP!
Please let me know if you have one available.

Just tossed one in the trash for pick up today ...........sorry

How can I tell if the engine bracket is an '88? I may have one...
I have a rust-free battery tray & 1/4 sheetmetal for sale:
https://www.fiero.nl/forum/Forum4/HTML/044546.html
~ Paul
aka "Tha Driver"

Genius by birth, slacker by choice.

Trashed? DOH!

The '88 bracket looks like this:


(pics courtesy of prizm-bluegt)

I need just the bracket, not the mount.
I'll pass on the battery tray, brand new they are $82. Thanks for the heads up, though. I'm not entirely sure I'm going to use one as I plan on possibly routing something else through there, but if I find one for cheap it can't hurt to mock it up at least.

[This message has been edited by ALLTRBO (edited 11-18-2008).]

Bump

Bump. I bought the bracket from the Fiero Factory.

List has been updated. I need more non-Fiero and aftermarket stuff.

Bump

I have an alternator from a 2002 Pontiac Grand Prix GTP L67 engine - is that the type of alternator you need?

I'm not sure. The part numbers show up as different, I'd have to check to see if it's the same 'enough'. Sometimes part numbers change when the part changes insignificantly. If I find out that I can use it I'll get back to you.
Thanks.

PM atcha

Were the side skirts listed before? I have a set.

Also, check the 95 3.4 Camaro alternator to see if it is what you want. I have one or two of those.

I'm also bringing a modified 88 rear cradle with linkage back from Florida with me this month. We can talk about that, too, if you need it.

[This message has been edited by Saxman (edited 12-10-2008).]

Toddster, PM relied.

Sax, nope, I just added them yesterday. The ones on the car are slightly damaged and I didn't notice until recently. I'll send a PM.

I also just remembered that I need a brake pedal cover (the rubber part). Manual only?

Bump.
List slightly updated. As for the alternator, I decided I'll get one from the JY when I figure out which I'm going to use of the two styles in mind now.

Bump

Added a Getrag clutch fork lever, this one I need soon.

[This message has been edited by ALLTRBO (edited 04-19-2009).]

Bump