Had this in my 88GT with a 3800SC Getrag swap. Less than 1000 miles on the swap. Going auto now so selling this off to fund the auto swap. The aluminum flywheel and stage 3+ clutch were ordered directly from Spec and were well over $1000 for the set when bought new at the time. Looking for offers right now. Also have the getrag, but that would probably be quite expensive to ship. Located in Nova Scotia, Canada.

SOLD

[This message has been edited by Fiero Owner (edited 09-09-2009).]

Check your PM's m8.

PM replied.

I got the engine and transmission separated and the flywheel has some damage on it. The bolts that held the flywheel to the crank broke off and scraped against the flywheel making a ridge around the bolt holes of the flywheel. A machine shop should be able to fix this. Let me know if anyone is still interested in this. Pictures below.

How deep is the gouging on the flywheel. Dan

I would say it's around 1/8" deep at the deepest part maybe at the most.

[This message has been edited by Fiero Owner (edited 06-21-2009).]

Any offers for either the flywheel or the clutch or both?

I am interested in the flywheel and clutch, but I am no good at offering a price. Do you have a ballpark of what you are looking to get? PM me if needed.

-Joe

Sent you a PM.

$450 for the flywheel and clutch setup.

Clutch is now on eBay

http://cgi.ebay.ca/Spec-Sta...3A1|293%3A1|294%3A50

[This message has been edited by Fiero Owner (edited 06-30-2009).]

Bump

Still have both clutch and flywheel if anyone is interested.

You have a PM.

Bump

BUMP

You have a PM

BUMP

Any offers?

$450 shipped anywhere in North America anyone?

Hello
I now have this Swap for sale
https://www.fiero.nl/forum/Forum4/HTML/055235.html
Stefan