As the title says, I'm looking to buy your old outboard Fiero stick shift C/V joints.

These are the outboard C/V joints from stick shift axles.

Need all I can get.

I DO NOT NEED the C/V joints from automatic cars.

Paying $25.00 each Plus shipping.

Thanks

Archie

[This message has been edited by Archie (edited 11-02-2010).]

pm sent

Archie, are you needing the joint itself or the hub part that goes threw the hub and gets the big nut? I have one passenger side axle ,( the long one) without the inner joint.
Edited to add:
The piece on the far right with the big nut?

[This message has been edited by josef644 (edited 12-02-2009).]

Could you put up a pic of exactly what you need?

quote Originally posted by josef644: Archie, are you needing the joint itself or the hub part that goes threw the hub and gets the big nut? I have one passenger side axle ,( the long one) without the inner joint. Edited to add: The piece on the far right with the big nut?

That's right, I'm after the piece on the right.

Don't really need the boot because I'm rebuilding them C/V's & don't need the axle shaft cuz I got a bunch of them.

I'll get some pics tomorrow.

Archie

Bumping this up for more C/V joints.

Here's what I'm looking for.

An outboard Fiero stick shift C/V joint looks like this.....



After you remove the boot clamps & push the boot back away from the C/V joint, you can remove the C/V joint from the shaft by opening up the snap ring with a pair of snap ring plyers......



Then just slide the axle shaft out of the C/V joint......



Don't worry about the grease or anything else. just put the C/V joints in a plastic bag & into a box & send them to me.

Thanks

Archie

Great. I can send you the one I have in the garage, You pay me now, or how do you want to do this? Who pays shipping? I do have PayPal

I'll take the end off some time Sunday. We are expecting snow tomorrow and 23* Satuerday. Cold here for the next two days. I can ship Monday USPS.
Joe

quote Originally posted by josef644: Great. I can send you the one I have in the garage, You pay me now, or how do you want to do this? Who pays shipping? I do have PayPal I'll take the end off some time Sunday. We are expecting snow tomorrow and 23* Satuerday. Cold here for the next two days. I can ship Monday USPS. Joe

I can pay the postage & I pay in advance.

Find out what your p-ostage will be & PM me your paypal info.

Archie

Will do
Thanks
Joe

Bump for the weekend guys.

Free bump on 'Football Day USA'. Archie you want Parcel Post or Proprity Mail?

Here are a few shots of the snapring you will need to open up to remove the axle from the outter CV joint. I had never seen a real good shot of this. Most of the time the CV greese is still covering some of it, or a big red arrow blocks some of the view. So here ya go. I just did mine for Archie, took me under 5 min's:

and

[This message has been edited by josef644 (edited 12-06-2009).]

quote Originally posted by josef644: Free bump on 'Football Day USA'. Archie you want Parcel Post or Proprity Mail? Here are a few shots of the snapring you will need to open up to remove the axle from the outter CV joint. I had never seen a real good shot of this. Most of the time the CV greese is still covering some of it, or a big red arrow blocks some of the view. So here ya go. I just did mine for Archie, took me under 5 min's: and

Parcel Post or Proprity Mail, Either one will be just fine.

Just let me know the total you need sent via Paypal.

Archie

PM sent

bump

I am guessing they need to be in good working order? I also have one, but the cage and bearings are gone.

bump

I have some rebuild parts.

Archie

quote Originally posted by Dracor: I am guessing they need to be in good working order? I also have one, but the cage and bearings are gone.

It came in yesterday, Thanks

A

quote Originally posted by josef644:

[This message has been edited by Archie (edited 12-15-2009).]

Archie,
I have a set I will send you.
just credit my next order
D.

Thanks

Archie

quote Originally posted by whodeanie: Archie, I have a set I will send you. just credit my next order D.

More C/V joints needed.

Archie

So far I've Rec'd. all the C/V joints people have offered by PM's.

Still need more.

Thanks

Archie

Bump for Archie
PM sent

quote Originally posted by whodeanie: Archie, I have a set I will send you. just credit my next order D.

Got them, thanks

Anybody have any more?????

Archie

quote Originally posted by Archie: Got them, thanks Anybody have any more????? Archie

Archie,

I've got 4 good outer manuals from 88 stick cars...I'll get a shipping cost (from Las Vegas) and get back to you within a couple of days.

Dave

------------------
88 Coupe/full GT Conversion/3.4 getrag
"Coastie"

Okay dumb question does it have to be a getrag axle?

quote Originally posted by Four_hundred_86: Okay dumb question does it have to be a getrag axle?

Nope...Isuzu and Getrag axles are the same!!!

Just posting so I can leave some good feedback. Thanks again.

quote Originally posted by Cheeze_87: Just posting so I can leave some good feedback. Thanks again.

Thanks

Got the C/V joint today.

Archie

^ Bump ^

Bump for people looking for a little Holiday cash.

Archie