I have a very limited number of "Jacked up" distributors available.
These distributors have been taken apart and checked over to make sure they're in perfect condition. The bodies have been machined smooth, generally cleaned up and exposed steel painted. I've mounted one of my custom heat sinks, a mag pack and a new pickup coil to insure years of trouble free driving.
You get new screws for your ignition module because the threads are now standard machine screw threads and they're in the heat sink. This gives you lots more holding power and no more metric screw problems. You also get some heat sink compound (grease) to use when you mount your ignition module.
These are very nice units with lots of custom work done to them. If you're worried about ignition "brown outs" this is the solution.
What you see in these pictures is what you get. If you decide to send me your distributor for exchange, just send what's in the pictures. Keep your ignition module, rotor and cap.
Have a look!
I want $250 U.S. + exchange (Assuming your distributor has good bearings)
I will sell them for $300 U.S. no exchange if you prefer.
+ shipping from BC Canada.
I don't plan on making very many more of these. It's a time consuming process for sure.
(Heat sinks and mag packs available individually)
Please PM your orders.
Thanks and Happy New Year!
Damien
------------------
You Dream it Up -- I'll Build it
[This message has been edited by Dawg (edited 01-08-2010).]
