Hi guys. I hate to do this but I need to sell off my precious Fiero parts. My business burned to the ground last year, and I have been fighting the insurance companies over medical bills, unfortunately I have lost everything... Just when I thought I could start over now I have a IRS problems. They really knock you when you're down!
I want to be fair. I don't know what my parts are worth, and I'm trusting in the kindness of the Fiero community to be fair with me. I know everyone would love to get their parts for dirt cheap, but please don't be surprised if I can't let something go for so little... This is all I have at the moment. A small shop full of fiero parts. And when they are gone, I will have just my one Fiero and no replacement parts. I'm just hoping I can make enough to finish of the payments on the rest of some of my medical bills.
Another note. I suck at shipping! It seems every time i get online and get a shipping quote it's never the same at the post office! I live 20 miles form the shop, so getting things shipped out in lots would be better then piece by piece. Also the nearest post office is a ways from the shop as well. I always see "How much for shipping to 95401" But can I give you my zip code and have you guys tell me how much the shipping would be?
My zip code for shipping is 95472 Thank you guys....
So here is the line up....Things are kind of packed in, but as some items come out for shipping, I can update with more items.
(1) Drivers side NOTCHBACK tail light. (Has white over spray on top left) (2) Passenger side NOTCHBACK tail light. (Clean, clean!) No cracks in either tail lights.
- (1) 4 Speed shifter and cables. - (1) 2.8 Complete manual wire harness with out AC.
- (1) 2.8 Complete manual wire harness WITH AC.
- (1) 2.8 Complete AUTO wire harness WITH AC. (ENGINE BAD, BLOWN ROD, PARTS ONLY)
- (Numerous) Notchback vents. Aluminum, and steal.
- (Numerous) Radiator and windshield wiper Reservoirs.
- (MISC) Brackets, heat shields,
- (1) Like New empty Gauge pod (No cracks)
- (1) 80mph gauge and RPM cluster complete
- (1) 80mph gauge - (1) RPM gauge
- (2) Temp and Fuel gauges (One sold to NJ88FIEROGT)
- (2) Front end wire harness PRE 87 NOTCHBACK. - (1) Rear end wire harness PRE 87 NOTCHBACK
- (1) Steering wheel column FOR PARTS (WITH cruse control) - (1) Complete steering wheel column with key (Non cruse control) - (1) Complete steering wheel column with key (WITH cruse control)
- (2) NEW in box, Front Rotors, light surface rust
- (2) ECM "SERV. NO. 1226869 For 1985 V6" Not sure auto of manual - (1) ECM "SERV. NO. 1227170 1986-1988 V6" Not sure auto of manual. - (1) Iron Duke 4 speed ECM/PCM
UPDATE: I do have the PROM numbers and will post soon.
- (Various) 2.8 Exhaust manifolds. No cracks, and flanges that needed, have been support welded.
- (Various) 2.8 Distributors.
IN THE PICTURE BELOW:
- (Set) AC lines - (1) Drivers side front fender, no damage. - (1) GT Wing, silver, no support brackets. - (Pair) Black Door skins. - (2) GT Rear fascias, both need new paint
[This message has been edited by Seanpaul (edited 04-16-2010).]
IP: Logged
04:17 AM
PFF
System Bot
87antuzzi Member
Posts: 11151 From: Surrounded by corn. Registered: Feb 2009
To answer your questions on wiring harnesses. The front matters if it is 87-88 it is different and has wiring for the preferred (by most) motors. It also matters if it has the control module included or not. The rears are just notchback or fastback. They are very different.
87antuzzi: The engine is shot, like all my 2.8's any parts you want off of it?
iSh: PM sent.
ProjectPb: (1) Like New empty Gauge pod (No cracks) $40 plus shipping sound ok?
NJ88FIEROGT: (1) working gas / temp gauge cluster Yep still got it. Everything sits just like in the pics, I haven't been out to the shop yet this week. $20 plus shipping sound ok?
IP: Logged
05:38 PM
87antuzzi Member
Posts: 11151 From: Surrounded by corn. Registered: Feb 2009
87antuzzi: The engine is shot, like all my 2.8's any parts you want off of it?
iSh: PM sent.
ProjectPb: (1) Like New empty Gauge pod (No cracks) $40 plus shipping sound ok?
NJ88FIEROGT: (1) working gas / temp gauge cluster Yep still got it. Everything sits just like in the pics, I haven't been out to the shop yet this week. $20 plus shipping sound ok?
What year on the front rotors? The picture you have with the rotor box picture looks like a rear rotor. I wasnt aware of any single front rotors. All that I have seen have been dual with air vent in the middle. Sorry I cant think straight tonight. Steve W. NE Grand Rapids, MI 88 Coupe
[This message has been edited by solotwo (edited 04-06-2010).]
What year on the front rotors? The picture you have with the rotor box picture looks like a rear rotor. I wasnt aware of any single front rotors. All that I have seen have been dual with air vent in the middle. Sorry I cant think straight tonight. Steve W. NE Grand Rapids, MI 88 Coupe
Sorry. Pre 88 Fronts with inner barrings.
IP: Logged
01:07 AM
Seanpaul Member
Posts: 1320 From: Santa Rosa, North CA. Registered: Mar 2003
Sean these are NOT fastback tail lights your sold me !! Check this PLEASE !!
Yes, looks like i have made a mistake. I'm so sorry. A pp refund is on the way. I'm just glad that i unwrapped the tail lights today and took some pics, then resent them to your other email after having a bounce back from your first email.
[This message has been edited by Seanpaul (edited 04-09-2010).]
IP: Logged
03:27 AM
PFF
System Bot
Seanpaul Member
Posts: 1320 From: Santa Rosa, North CA. Registered: Mar 2003
^ If you would have taken a few minutes to read my response to your email that I sent, you would have saved your self some time of having to make a photoshop pic. This is why I unwrapped the tail lights and took pics today. I'm sorry you thought you were getting FB taillights, I made a mistake when posting the items. I have sent you a complete refund! I'm eating the packing costs at the UPS store as we speak, so have some satisfaction knowing this mistake cost me...
Sorry Sean I thought you were gone to sleep and I wanted to make sure you didnt ship them out in the morning... WE ALL MAKE MISTAKES AND SO DO I ... you are a excellent person to deal with and I encourage all the people here to buy your stuff ... If you look at your feedback I have sent a POSITiVE ONE for you sorry for being an ASS I guess that was MY MISTAKE !!! Christmas just went up in flames for me too !!! take care Danyel
Been around Fieros since i was 16, now 33. I've had fastbacks, notchbacks, over 33 Fieros last time i was counting. I simply made a inventory error. I'm glad I unwrapped the items before shipping them to Canada! That would have been horrible!
NOTE to everyone: I don't have any items in the shop wrapped up! I unwrapped everything today.
Would you have have the Primary Ignition Module for the 87/88 dukes which have the DIS ignition system? Actually looking for the metal shield that sits between the PIM and the two coils.
IP: Logged
07:55 PM
Seanpaul Member
Posts: 1320 From: Santa Rosa, North CA. Registered: Mar 2003
Would you have have the Primary Ignition Module for the 87/88 dukes which have the DIS ignition system? Actually looking for the metal shield that sits between the PIM and the two coils.
Sorry. I don't have any duke parts. I was forced to toss them years ago when I had to move :-(
IP: Logged
08:42 PM
Apr 13th, 2010
Seanpaul Member
Posts: 1320 From: Santa Rosa, North CA. Registered: Mar 2003
. I needed the whole engine lol.
for the tail lights.
...... 
pretty sure you'll think of me hehehehe 
