I want to get a set of deck lid mirrors. I believe it is polished stainless steel, but would prefer buying them from someone that can make the cuts neatly. Thanks,
IP: Logged
08:52 PM
PFF
System Bot
Spoon Member
Posts: 3762 From: Sadsburyville, PA. 19369 / USA Registered: May 2004
Gt or Cpe? I'm looking for the same for my SE. PM me if you have any luck.
Spoon
------------------ Two yeast spent their entire life "about 2 days" discussing what the purpose of life could be and not once did they even come close to the fact that they were making champagne. Quoted by: Unknown
IP: Logged
10:30 PM
May 4th, 2010
gtxbullet Member
Posts: 4179 From: Pewaukee, Wisconsin, USA Registered: Apr 2008
same here, I've emailed and called several different companies both locally and online. like Ebay, etc. no one has a template for the Fiero so you'd have to give them precise measurements and expect to pay between $200-$600 or you could try to do-it-yourself. but you'll have to have a good hand to make it just right.
if you come up with anyone who will do it and for exactly how much please PM me
IP: Logged
04:20 PM
fieroguru Member
Posts: 12336 From: Champaign, IL Registered: Aug 2003
Hang loose guys, in the next week or two I'm going to cut some sets. Since they're test sets, they'll go at low cost. We already have the templates made and are now transferring them to CAD files for the water jet cutting.
I'm looking at making panels out of polished Stainless Steel and also some from polished Aluminum (cheaper). I have templates for all the underhood and under bonnet recessed areas, but I understand the area just above the engine is the most popular.
I'll post pics and prices when I have some parts.
Marc
------------------ Marc in sunny Titusville, FL
84 SE son's car, loaded
85 Coup w/V6 transplant
85 GT newly on the road
86 SE/GT "The Chameleon" - big plans!
IP: Logged
05:55 AM
awestfield Member
Posts: 176 From: murfreesboro, tn Registered: Mar 2010
Hang loose guys, in the next week or two I'm going to cut some sets. Since they're test sets, they'll go at low cost. We already have the templates made and are now transferring them to CAD files for the water jet cutting.
I'm looking at making panels out of polished Stainless Steel and also some from polished Aluminum (cheaper). I have templates for all the underhood and under bonnet recessed areas, but I understand the area just above the engine is the most popular.
I'll post pics and prices when I have some parts.
Marc
sweet!!!!
IP: Logged
11:52 AM
Paulv Member
Posts: 1530 From: Lisle, Il, (Chicago Area) USA Registered: Nov 1999
Hang loose guys, in the next week or two I'm going to cut some sets. Since they're test sets, they'll go at low cost. We already have the templates made and are now transferring them to CAD files for the water jet cutting.
I'm looking at making panels out of polished Stainless Steel and also some from polished Aluminum (cheaper). I have templates for all the underhood and under bonnet recessed areas, but I understand the area just above the engine is the most popular.
When you get them installed be EXTREMELY careful not to scratch them with steel wool or a gritty wash cloth. They scuff very easily, but look great if you wash them with mild detergent and towel dry them. Basically, treat them the same as you would the paint on the car.
I have 1 set of the SS mirrors for a coupe deck, don't recall if all 85-88 notchback deck lids are same cut outs? Would have to check. Protective covering never removed.
I have 1 set of the SS mirrors for a coupe deck, don't recall if all 85-88 notchback deck lids are same cut outs? Would have to check. Protective covering never removed.
anyone know if these would fit an 85 gt (notchie)?
Hang loose guys, in the next week or two I'm going to cut some sets. Since they're test sets, they'll go at low cost. We already have the templates made and are now transferring them to CAD files for the water jet cutting.
I'm looking at making panels out of polished Stainless Steel and also some from polished Aluminum (cheaper). I have templates for all the underhood and under bonnet recessed areas, but I understand the area just above the engine is the most popular.
I'll post pics and prices when I have some parts.
Marc
PM sent
Vince
------------------ Hop Till You Drop!! www.worldwidefieros.com "Uniting Fiero Owners Worldwide"
Mirror Finish Stainless Door Sill Plates Powder Coating Services
86 GT " Snapperhead" .. Lambo Doors, ZZ4 FI 350, 5sp, Car pc, Laser Blue 87 GT "Whippersnapper" .. 2.8, Auto.. Planning a LS4 Conversion 88 Formula.. 2.8, Auto, Stock, White... Wife Ride 85 Gt Black, 2.8, 4sp, Lowered and ready for paint. 99 K2500 Suburban, 454, 4X4, The Tow Rig 04 Trailblazer, 4x4, Green, Wife Ride
