These bushings completely replace the front rubber and outer steel casing so no burning is required just pound the old bushings out and pound this in. They fit tightly and are sandblasted but, as you can see, are dinged and gouged. There's nothing wrong with them I just decided to go with an '88 cradle.

$50 shipped to the lower 48 I prefer Paypal

Thanks,

------------------
Alan Frazier

'84 2m4 Northstar 5 speed
'84 3800SCII sold
'86 GT-'92 3.4 TDC 5 speed(sold)

What is the brand?

That's a good question I'm not sure I got them second hand.

AFAIK, rodney dickman is the only person that made those?

I know they don't look like Rodneys current bushings because his either use the stock rubber outer housing or a new steel housing you weld in. I'm thinking they were made by Darrell Morse but I can't be sure.

------------------
Alan Frazier

'84 2m4 Northstar 5 speed
'84 3800SCII sold
'86 GT-'92 3.4 TDC 5 speed(sold)

I will take them if they are still available. And if so, do you accept paypal?
Edit to say, I'm assuming these are for 84-87 since you mentioned going to an 88 cradle.

[This message has been edited by crt454 (edited 12-01-2010).]

Yep they're available and yes they're for '84-87 cradles. My Paypal is alanfraz@hotmail.com

Thanks!

------------------
Alan Frazier

'84 2m4 Northstar 5 speed
'84 3800SCII sold
'86 GT-'92 3.4 TDC 5 speed(sold)

PM Sent.

SOLD to crt454

I received the parts today. They look great. Thanks!