UPDATED 4/3

Available Saturdays and Sundays
Parts are Located in Downingtown, PA
Paypal only unless local PU, then cash

It might take me a couple days to ship items, I will keep buyers upto date!
I work until around 9pm EST so be patient with PM requests!

Item #2 LOCAL P/U ONLY $30/set Tinted door glass both sides - slight scratches


Item #3 LOCAL P/U ONLY $10 Black Hood, needs work - great for experimental use!

Item #4 LOCAL P/U ONLY $10/set Inside door panels (pwr mirror panels) painted black

Item #5 LOCAL P/U ONLY $10 P/S black door skin with ground fx

Item #11 ****ADDED PIC #11**** WILL SHIP USA ONLY UPS $70 + Shipping from Zip 19335 UPS/ aprox 20lbs dimensions - 29*12*12 88 Rear Suspension parts, Includes parts for both sides- trailing arms, endlinks (No Knuckles and bearings,)

Item #13 ****ADDED PIC #13**** WILL SHIP USA ONLY UPS $60 Shipped $40 local PU 2.8 Manifold set with gaskets that only have a few hours use, no cracks, flush surface, just reworked by a professional machine shop.

Item #14 LOCAL P/U ONLY $60 88 Manual Stainless Steel coolant tube (front of engine) includes the attaching hoses in good condition.(Fierostore listed price $150)

Item #15 ****ADDED PIC #15**** LOCAL P/U ONLY $15 Rear Strut/Spring combo(set)

Item #18 ****ADDED PIC #18**** WILL SHIP USA ONLY UPS or USPS Flat Rate box $50 shipped Entire new set of rubber brake hoses bought from the Fiero store, installed, used for a few times and removed for the stripping of the car. Cost $100+shipping from The Fierostore

Item #19 ****ADDED PIC #19**** LOCAL P/U ONLY $130 88 Rear Cradle, Good condition! has the auto trans mount ear that can be cut off if someone chose to use it for a manual.

Item #24 LOCAL P/U ONLY $25 Driver Side 88 Coolant pipe (run along the sides of the car) have a few dents here and there

Item #27 ****ADDED PIC #27**** WILL SHIP USA ONLY UPS or Local PU $60 + Shipping from Zip 19335 UPS/ 64lbs dimensions - 22*12*12 Front Suspension A-Arms and wheel assemblys

Item #29 ****ADDED PIC #29**** WILL SHIP USA ONLY UPS $20 + Shipping from Zip 19335 UPS/ 14lbs dimensions - 14*11*7 Front Springs, Look like they are lowered/cut.

- ADDED LS1M OBD2 Scanner
Comes with m505 palm(batterys need replaced) mount for in the car(only the part that holds the palm part) USB Stand/charger cable, USB to Palm Cable, Palm to OBD2 port cable, manual, disk with the software since the batterys die/ls1m software needs reloaded (available free online)
http://www.ls1m.com/

$60 Shipped




PIC#11


PIC#13



PIC#15


PIC#18


PIC#19


PIC#27



PIC#29

[This message has been edited by Back On Holiday (edited 04-03-2011).]

.

[This message has been edited by mattwa (edited 04-04-2011).]

You have a PM.

bump

Bumpy for the weekend, making deals

Oh man I wish you were closer b/c I need a stock exhaust system for my 86 GT. Good luck with the sale though!

PM on Manifolds..

I'd love to have that cradle too for my 87, but I'm way out of area. No way to pick it up.

Do you have the front fenderwells?

quote Originally posted by ALLTRBO: Do you have the front fenderwells?

Yes, couple sets, one set is nice, just a couple staples coming loose from the rubber attachment, $40 for the set p/u only
i'll pm you my cell and address

If nobody grabs it I might snag the gen 2 headlight setup... Let me check me finances.

quote Originally posted by TommyRocker: If nobody grabs it I might snag the gen 2 headlight setup... Let me check me finances.

Will do, nobody claimed it yet.

Bump, pics added

PM's Replied to

bumpy

How about the throttle and cruise control cable?

quote Originally posted by 2002z28ssconv: How about the throttle and cruise control cable?

throttle cable clip broke removing it, cruise cable wasn't there when I bought it, sorry.

bumpy, for last minute pre-holiday parts!

Hi, I'm looking for a oil pressure sending unit (three prong) also the temp. sending unit (rear head left side). Thanks, John

John, i'll let you know about the cable, pulling last few parts this afternoon and the cable is one of them, the oil sending unit I have on the engine is the big black canister type (85-87) i'll let you know this evening. you planning on picking stuff up, i'm available all day sunday and have lots of odds and ends of stuff dirt cheap I can bundle together for a couple bucks

PM sent

quote Originally posted by Back On Holiday: John, i'll let you know about the cable, pulling last few parts this afternoon and the cable is one of them, the oil sending unit I have on the engine is the big black canister type (85-87) i'll let you know this evening. you planning on picking stuff up, i'm available all day sunday and have lots of odds and ends of stuff dirt cheap I can bundle together for a couple bucks

Cable is part of the cradle assembly I'm selling, didnt realize it (doh!)

BOH, the E-cable I'm looking for is from the handle to the frame. And yes the oil pressure sender I'm looking for is the larger 3 pin unit. Let me know. Thanks, John

I'll buy that cradle for a dollar.

I am only about an hour away and am interested in the tilt column and possibly several other parts you have listed for my 88 Formula project. Are you around on Dec 26th by any chance?

PM sent....

quote Originally posted by John Miller: BOH, the E-cable I'm looking for is from the handle to the frame. And yes the oil pressure sender I'm looking for is the larger 3 pin unit. Let me know. Thanks, John

John, sorry! leaving the whole cable assembly as part of the cradle, not seperating. I'll take a pic of the pressure sender to make sure its the one you want. (before sunday afternoon) if your still interested.

Andrew

Yes, I'm interested. Did you look for the temp. sender? Thanks, John

I just got a ticket for having a headlight down(I should have just rolled it up manually but its cold and I was lazy)... So I think I have my excuse for buying your setup if you still have it.

Interested in the Rear sway bar. Item # 10. Pm sent.

Edit to add, BOH, you need to update your build on CGP!

[This message has been edited by katore8105 (edited 12-25-2010).]

PM sent...

quote Originally posted by John Miller: Yes, I'm interested. Did you look for the temp. sender? Thanks, John

Temp and oil press sensors, you need the oil line also or just the sensor?

Payment sent!

Bump!

Thanks Andrew , good seller , everything as described .
Good packaging . A + for you
Robert

bump for a good seller, thanks for the rear sway bar!