I have a series II 3800 from what was reported to be a 1996 Pontiac Bonneville with less than 90k miles. The motor and all components turn freely. I pulled the throttle body and the valve covers and found no issues. With this motor comes the Fiero Getrag 5 speed that came in my 1988 Fiero. It is already mated to the engine with a balanced flywheel and clutch set-up. The engine/transmission is currently attached to my subframe (not selling the subframe) with West Coast Fiero brackets. I also have the adapted thermostat housing and the K&N breather for the valve cover. I also have the oil filter adapter with a new filter installed. I have the wiring harness that came with the engine, but it has a couple connectors that were cut during removal. I am selling the whole set-up for $1000 obo. Initially I am not interesting in parting this out, but I might in the future pending on how this sale progresses. Please send my your email address for photos.

Thanks for looking.

Rob

Might has someone that would be interested in the complete setup....what clutch is in the setup? Send pictures to stephen_poe@hotmail.com

allen2680@hotmail.com (looks like something that would greatly interest me) Please send the pics and details! Thanks.

Pictures have been sent.

For the life of me, I cannot remember what clutch set-up is. I purchased if from a forum member, but must have deleted the PM with the details.

Thanks,

Rob

god bless i wish i had the money! lol...

hello, I believe that I am the one that mstangsbware is talking about in his post, could you send me some of the pictures as well? thank you.
Taylor_matthew27@yahoo.com

[This message has been edited by fierogt27 (edited 01-22-2011).]

Pm sent

can you tell us some of the parts that are on it? like what flywheel, mounts and everything else that is included in the sale?

quote Originally posted by fierogt27: can you tell us some of the parts that are on it? like what flywheel, mounts and everything else that is included in the sale?

I already got that info...I will forward you the E-mails......

Still availble. I have contacted the individual I purchased the clutch/flywheel from and am awaiting the details on the brand.

Thanks,

let me know when you find out the clutch info

Sorry for the delay to all. The clutch is from ClutchNet and has never been used. It is rated to 400 hp.

Thanks again for looking.

Rob

i would like the clutch, pressure plate, flywheel, and mounts, how would you except payment?

Payments can be in the form of PayPal or Money Order. Please PM me for details for either.

Thanks,

Rob

The part out has begun. I have buyers for the transmission, the conversion brackets, and the clutch and flywheel. If any of those fall through, I will let everyone know. Here is what I still have for sale (all are still new, never run parts) and the obo prices:

- adapted thermostat housing for 3800 engine - $80 plus shipping
- the K&N breather for the valve cover - $35 plus shipping
- the oil filter adapter with a new filter installed - $30 plus shipping

I also still have the 1996 Series II SC 3800 engine for sale. The price is $450 obo plus shipping.

Please let me know if you have any interest.

Thanks,

Rob

PM........

Pm sent

Here is what I still have for sale (these are still new, never run parts) and the obo prices:

- adapted thermostat housing for 3800 engine - $80 plus shipping
-- the oil filter adapter with a new filter installed - $30 plus shipping

I also still have the 1996 Series II SC 3800 engine for sale. The price is $450 obo plus shipping.

Please let me know if you have any interest.

Thanks,

Rob

Got 'em, wow that was fast. big plus for you. Thnx

If you still have the oil filter adapter, email me a pic of it to jopfermann (at) my.monroeccc.edu

What would a reasonable shipping estimate be to 37801 for that engine you got? It may finally be time to slip a 3800 into my baby.

All items sold except the Series II SC 3800 and the shifter. I have to answer one PM regarding the shifter but have not been home to clarify their question. Right now, I would estimate the shipping to be about $175 to Tennessee as that is what I paid the last time I shipped an engine.

Thanks,

Rob