Ok, my wife and I just made an offer on a house and so I want to clean up my garage before the move. I'm going to list the things for sale first, then the free stuff. I will do pickup only on the free stuff, and I might ship the sale items, but I'm not going to guarantee I'll ship anything. I live in the Washington D.C. area so I can meet to deliver either free or sale items. All prices assume pickup.

I don't know what the rule is regarding linking outside for sales, but I didn't want to list and maintain two forum topics on the 3800 stuff, so check the link below if you want to look at the 3800 specific items I have for sale (clubgp.com):

http://www.clubgp.com/newfo...&p=1&tmode=1&smode=1

For Sale:

Spoken for: Wide Front Fenders: I've tried to sell these before with very little interest. I'll take $50 for the two (not shipped).

Freebies:

Spoken for: I believe this to be an '88 V6 Manual ECU but I'm unsure - check the part # to ensure it's what you want

Spoken for: New Fuel Filter for '88 V6

Spoken for: A-pillar 3-gauge Gauge Pod: Didn't quite fit as well as another I purchased, was a little wide.

Spoken for: '88 GT Rear Bumper: Taken off my 88GT, has been repaired where the inner wheel well bolts to the passenger side, usable/repairable

Spoken for: 2 Boxes of heat shield. 1 New box (24x48 inches) and a small amount left in the other.

Spoken for: Lot 1 of parts:
Cruise Control Canister, Solenoid
OEM Slave Cylinder (Getrag)
Fiero Store Slave Cylinder (Getrag, newer)
Charcoal Canister (Fiero Store)

Lot 2 of parts:
Spoken for: Steel clutch pedal (Fiero Store)
Spoken for: Custom slave cylinder bracket for use with 3800 swap + Getrag + TOG headers
Spoken for: Same Fiero ECU as above
Spoken for: Plastic air intake tube
Spoken for: '88 Dogbone

Spoken for: '88GT Rear Quarter Panels

Spoken For: Rack & Pinion Steering Boots - from Rodney Dickman

Spoken For: Trunk Solenoid: Used in good condition

Spoken For: 3800 Swap T-Stat housing. Works, but the angle will not allow for use of the boost solenoid.


Edit: Fast moving on the freebies.

Edit 2: Looks like everything is spoken for, I will PM members after I ship their items.

[This message has been edited by grsychckn (edited 01-23-2011).]

Why is everything free, but not in Texas. You got some stuff I need.

quote Originally posted by craigsfiero2007: Why is everything free, but not in Texas. You got some stuff I need.

If it's a matter of need and can use more than one or two things, PM me. I am trying to avoid shipping a whole bunch of packages, but if we can put a few things together it might be worth it for the both of us. I don't want to throw away things that other can use.

PM sent

quote Originally posted by grsychckn: If it's a matter of need and can use more than one or two things, PM me. I am trying to avoid shipping a whole bunch of packages, but if we can put a few things together it might be worth it for the both of us. I don't want to throw away things that other can use.

PM Sent

quote Originally posted by grsychckn: If it's a matter of need and can use more than one or two things, PM me. I am trying to avoid shipping a whole bunch of packages, but if we can put a few things together it might be worth it for the both of us. I don't want to throw away things that other can use.

I would definately like to have that pillar pod for sure!

All PMs replied to and status of items updated. I can no longer log into the clubgp site as I changed my e-mail and now it doesn't recognize my login. I will probably have to create a second account to update that post...

In the meantime, on the other post, the following have been spoken for:
3800 valve covers
3800 LIM gaskets
3800 NGK spark plugs

are the wider front fenders still available
you have PM.

quote Originally posted by gtxbullet: are the wider front fenders still available you have PM.

They are but at this point I'm unwilling to ship them. They are fragile and I don't want to have to package them up. If I do, I have a list of people already interested. I will update this post if my opinion of the shipping changes.

Thanks.

Are you willing to ship the dogbone to 14150?

quote Originally posted by Darksyde: Are you willing to ship the dogbone to 14150?

Sorry, is spoken for at the moment. If that falls through I'll PM you.

quote Originally posted by grsychckn: Sorry, is spoken for at the moment. If that falls through I'll PM you.

Thanks!

A bit off topic, but how did your car make out at the car shows this past year? Did you decide to keep the car?

Hey neighbor --- don't forget about Tom (the hvac guy) he may need a few items for his ongoing and yet to be put back together 3800. Are you staying in the area? and as ask above --- do you still have yours?

Steve308

quote Originally posted by steve308: Hey neighbor --- don't forget about Tom (the hvac guy) he may need a few items for his ongoing and yet to be put back together 3800. Are you staying in the area? and as ask above --- do you still have yours? Steve308

I will talk to Tom about the 3800 specific stuff. I still have the car and right now it's in storage in the garage. I bought a car capsule to keep it clean while in storage. I'm keeping it even if I only made 2 shows last year. I'm going to try to make it to more this upcoming year, but as always it depends on how my schedule opens up.

I might take you up on thoes front fender's. If i can swing it you think you could meet me somewhere in MD or somewhere around there to pick them up?

quote Originally posted by pontiackid86: I might take you up on thoes front fender's. If i can swing it you think you could meet me somewhere in MD or somewhere around there to pick them up?

Sorry man, someone already claimed them. But, if that falls through, you're the next in line being a non-shipping request.