Ok, time to start clearing out old stuff. I have a professional eprom/prom burner that works with the Stock Fiero's ECM chip type. Very few newer Eprom burners will burn a stock Fiero Chip becauset hey require high voltage programming and slower timing. I had bought 8 of the Willem and other brand burners only to find they dont work for burning Fiero chips. This Burner is the real deal. It's a pro level burner that even lets you modify the hex code from the keypad if you only need to change a couple of registers and will auto calculate the checksum.
It will burn 2 proms/ eproms at a time and is in like new shape.
it is a stag model PP39 with the 39M100 adapter deck installed. it has the power cord, the serial cord and adapter as well as a copy of the software. You need a machine that runs windows 95-98 or even windows 2000/XP it will NOT work under vista or windows 7. This is the most reliable burner I have ever used for fiero tuning. It never failed to do a good burn into the chip and it even verifies the burn.
It also has a feature the newer ones dont have. Chip copying. your buddy have a "power chip" pop it in, press read, pop in a blank eprom, press burn.
This thing cost $1800.00 when I bought it and I am pricing it to sell fast. $100.00 + $15.00 shipping in the USA. it's big, it's built like a tank so it's heavy.
and no, I will not offer tech support for how to use it or how to program a fiero ecm. you will need to read the manual on the disc or learn ECM tuning elsewhere. AS-IS, no returns.
------------------
Get your copy of the Fiero 25th Anniv book at http://www.blurb.com/bookstore/detail/349809
Best RV, Camper, and Trailer dealer in West Michigan. http://www.cliffstrailersales.com and he's a fiero owner too!
