I have a bunch of 2.8 engine parts that are taking up room in my shed.. intakes, heads,fuel rail,y pipes exhaust manifolds,distributor, injectors.. i know i'm forgetting things so if you need something particular let me know. I also have a complete long block that i was told had a rod knock engine is clean and looks like a good one to rebuild.. let me know what you need and i'm open to any reasonable offers.. If this stuff doesn't sell it's all going to the scrap yard.. i would much rather see it get put to use then to be made into soda cans and toyota truck frames

------------------
--Mark--
85 2m4 soon to be 3400 sfi 5 speed

[This message has been edited by 86 toy (edited 03-25-2011).]

Any idea what you want for the V6 auto harness top to bottom? What year did it come from. The 85's were also wired for knock sensor, and were different from the rest of the V6 harnesses.

zip 77364

i'm not sure on the year.. i got all this stuff from a guy on craigslist.. If i had to guess i would say 86 because some of the other parts i got were from an 86 car..

pm sent..

86 will work for me. Pm sent back to you

Money sent threw PayPal

[This message has been edited by josef644 (edited 03-19-2011).]

bump................

Do you have a distributor that isn't rusted up?

quote Originally posted by raysr11: Do you have a distributor that isn't rusted up?

I'll pull it out later today and get a good look at it and pm you what i find

[This message has been edited by 86 toy (edited 03-26-2011).]

Do you have a thermostat housing?

pm sent

quote Originally posted by raysr11: Do you have a distributor that isn't rusted up?

sold v6 wire harness, 2.8 t-stat housing, 2.8 exhaust manifold...still have plenty of parts here.. pm me with needs and offers

i could use valve covers and the oil filter thread thingy. (i.e. the actual treaded piece. should come out with a 10mm allen. but i need valve covers to dress up before my swap.

dirt cheap helps. doesnt matter on condition as long as thery're not dented.

i'll pull them out of the crates this weekend and see what i have..also i'll look on the block i have and see if the oil filter adapter is there

bump.... plenty of parts available

Free bump. Great seller

quote Originally posted by 86 toy: I have a bunch of 2.8 engine parts that are taking up room in my shed.. intakes, heads,fuel rail,y pipes exhaust manifolds,distributor, injectors.. i know i'm forgetting things so if you need something particular let me know. I also have a complete long block that i was told had a rod knock engine is clean and looks like a good one to rebuild.. let me know what you need and i'm open to any reasonable offers.. If this stuff doesn't sell it's all going to the scrap yard.. i would much rather see it get put to use then to be made into soda cans and toyota truck frames

do you have alternator bracket for 86 v6. thank you