All parts are located/shipped from the Frankfort, KY. Used set of Mr Mikes lether-ette Semi-Sport seats in Grey and yellow. These have not been used that long but the drivers seat shows some wear on the piping. Small 1/4 inch spot on the passenger side piping is worn too. Also these had the Fiero logos embroidered on them but for some reason the thread that he used disintigrated. I'm sure whoever gets these can have the one peice of piping replaced and the logos redone. They actually don't look bad as is. Kinda an embossed look to them now. LOL These run for $377 + shipping on Mr. Mikes site. I will include the seats if you want to come and get them otherwise I will remove the covers and send you them and a pair of hog ring pliers (and hog rings IF I can find them).
Asking $225 for the pair of seat covers plus shipping.
Paypal Prefered.
Amp for stock subwoofer setup. This mounts on the side of the center hump on the skeleton skirt. Worked when pulled.
Asking $30 + shipping
Set of BRAND NEW floor mats in yellow. These are nice heavy duty mats that have only been used during shows.
Asking $60 + shipping.
Paypal Prefered.
Momo chrome and leather Tomahawk shift knob WITH 5 speed short shifter. Shift knob cost me $94.
Asking $60 + Shipping for the set. Still up for grabs. Paypal Prefered.
Grant signature series steering wheel with billet horn adapter. Silver and Yellow leather. In excellent condition, no longer made. Matches the other yellow parts. Paid $75 for the billet adapter alone and close to $200 for the wheel. 14" wheel. Has a real nice feel to it.
Asking $125 + Shipping
Paypal prefered.
Vinyl saddle cover in yellow from Mr. Mikes, Brand new never installed.
Asking $20 + shipping. Still up for grabs.
Paypal prefered.
Fiero leather map pockets with embroidered Fiero logos in yellow.
Asking $30 + shipping.
Paypal prefered.
Yellow short shifter boot and ebrake cover, with good frames. Brake boot has a few cuts, shifter boot is perfect.
Asking $20 + shipping for both. Still up for grabs.
Set of yellow Mr. Mikes visors. LIke new with mounting hardware. Going for $100 new without hardware on Mr. MIkes site.
Asking $60 + shipping. Still up for grabs.
Payapl Prefered.
Grey door handles in good condition, not broken.
Asking $20 + shipping.
Paypal Prefered.
Great condition ash tray insrets.
Asking $10 + shipping for the pair.
Fiberglass Corvette Z06 light buckets for that custom tail light project. Heavy glass.
Asking $40 + shipping for the set of 4
[This message has been edited by chester (edited 09-24-2011).]
IP: Logged
02:23 PM
PFF
System Bot
fieroparts.com Member
Posts: 4831 From: Maine 207-934-1969 Registered: Jun 2000
I'll take the fan switch. I wish I'd known about it so it could've come with the other stuff you recently sent me... PM me with the shipping cost to 84092 and with anythnig else you're going to be selling. Thanks!
IP: Logged
05:59 PM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
I'll take the fan switch. I wish I'd known about it so it could've come with the other stuff you recently sent me... PM me with the shipping cost to 84092 and with anythnig else you're going to be selling. Thanks!
I'm parting out a complete car so let me know what your looking for. I'll be posting engine parts in the next few days which includes Darell Morse bored throttle body/plenum in yellow with matching valve covers, 1:1.6 roller rockers, fuel rail with adjustable pressure regualtor and guage, stainless steel vacuum lines, set of heads that have been reworked 5000 miles ago shaved .020 with HD valve springs titanium retainers and 3 angle valve job including matching lower intake, set of .030 forged flat top pistons with rods and ARP hardware...ETC. With my wifes health it is taking me a little while to post everything so please be patient. I don't make squat on shipping so I don't mind combining things.
I'll probably be posting stuff for the next week or two or so... LOL
Let me know if you want to wait on shipping the fan switch. I don't have a problem holding it as long as your commited to the purchase.
Thanks for understanding...
Chester...
IP: Logged
06:46 PM
JohnWPB Member
Posts: 5218 From: West Palm Beach, Florida Registered: May 2009
With all the attention to detail, on all the painted, covered, wrapped ect, I bet that was a VERY nice looking car to begin with. What is the story with why it is being parted out if I may ask.
I also sent you a PM about the Cavalier digital dash, and that installation manual.
With all the attention to detail, on all the painted, covered, wrapped ect, I bet that was a VERY nice looking car to begin with. What is the story with why it is being parted out if I may ask.
I also sent you a PM about the Cavalier digital dash, and that installation manual.
Yup we have a ton of money invested. Motor ate a lifter some time ago. The mechanic I had put it together didn't lash the valves properly. Wife is having medical issues so she can't drive it any more so we decided to part it out...This was Elviras car...
IP: Logged
08:39 AM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
I'm parting out a complete car so let me know what your looking for. I'll be posting engine parts in the next few days which includes Darell Morse bored throttle body/plenum in yellow with matching valve covers, 1:1.6 roller rockers, fuel rail with adjustable pressure regualtor and guage, stainless steel vacuum lines, set of heads that have been reworked 5000 miles ago shaved .020 with HD valve springs titanium retainers and 3 angle valve job including matching lower intake, set of .030 forged flat top pistons with rods and ARP hardware...ETC. With my wifes health it is taking me a little while to post everything so please be patient. I don't make squat on shipping so I don't mind combining things.
I'll probably be posting stuff for the next week or two or so... LOL
Let me know if you want to wait on shipping the fan switch. I don't have a problem holding it as long as your commited to the purchase.
Thanks for understanding...
Chester...
I definitely want the switch. I may want more. I'll PM you later, but please hold the switch. Thanks!
IP: Logged
09:37 AM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
If not already spoken for id like the short shifter And both yellow boots the yellow visors Nd the ARM rest cover thing I will pm you after work EDIT. And the holly scoop!!!!!!! ------------------ 1987 Black GT Custom interior with Mr. Mikes seats soon
[This message has been edited by Celthora87GT (edited 07-11-2011).]
IP: Logged
02:51 PM
woodrow50 Member
Posts: 294 From: Richmond, Texas, U.S. Registered: Feb 2010
If not already spoken for id like the short shifter And both yellow boots the yellow visors Nd the ARM rest cover thing I will pm you after work EDIT. And the holly scoop!!!!!!!
You got a pm
IP: Logged
08:57 PM
Jul 12th, 2011
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
If not already spoken for id like the short shifter And both yellow boots the yellow visors Nd the ARM rest cover thing I will pm you after work EDIT. And the holly scoop!!!!!!!
Deal fell through, parts still up for grabs.
IP: Logged
09:39 PM
Jul 13th, 2011
fieroparts.com Member
Posts: 4831 From: Maine 207-934-1969 Registered: Jun 2000
cant get the shifter but i am interested in the heads and intake/valve covers could i get any pics?
The intake and valve covers are listed in my other for sale thread under V6 performance parts. I won't have the heads off till later this week/weekend.
Rob D.
[This message has been edited by chester (edited 07-13-2011).]
IP: Logged
08:50 PM
Jul 17th, 2011
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
HEY CHESTER, Did u sell the dig.cluster? if not shoot me the price and paypal to 35023. btw my brother interested in the rat,I gave him ur # so if he calls it will be from a 205 area code. And if u get down this way,I got a new TOY u might like to play with.....hint hint(ma deuce). LOL.
IP: Logged
07:16 AM
PFF
System Bot
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
HEY CHESTER, Did u sell the dig.cluster? if not shoot me the price and paypal to 35023. btw my brother interested in the rat,I gave him ur # so if he calls it will be from a 205 area code. And if u get down this way,I got a new TOY u might like to play with.....hint hint(ma deuce). LOL.
Thanks Chester Payment sent,I guess i was to busy talking i didnt get to see all the hidden stuff.....makes me wonder what else ur hiding. I got that TOY for the next 5 weeks,my buddy left it in my care and he knows I have an ITCH!!!!!!
IP: Logged
10:48 AM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
LOL I thought you bought it. Dang. Gonna have to try and make a trip your way! Get your brother on the ball!! LOL
Dash cluster is going out right now...
quote
Originally posted by fireboss:
Thanks Chester Payment sent,I guess i was to busy talking i didnt get to see all the hidden stuff.....makes me wonder what else ur hiding. I got that TOY for the next 5 weeks,my buddy left it in my care and he knows I have an ITCH!!!!!!
[This message has been edited by chester (edited 08-04-2011).]
IP: Logged
11:40 AM
Sep 21st, 2011
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001
Originally posted by chester: I will include the seats if you want to come and get them otherwise I will remove the covers and send you them and a pair of hog ring pliers (and hog rings IF I can find them).
Asking $225 for the pair of seat covers plus shipping.
If I got the seat covers I'd want the seats. In what general area are you?
Whenever I'm in the state of Insanity I usually don't remember how I got there
IP: Logged
01:00 PM
chester Member
Posts: 4063 From: State of insanity...moved in and comfortably numb... Registered: Jun 2001