Picked up an 88 Coupe yesterday that has been sitting for a few years....Plans are to part it out as the title is no good on the car....I have not gone over the car completly yet but will be looking it over in the next few days. Anything needed let me know and I will check on the condtion and get a price for the part.......

Edit:The car is a 5 speed Izusu....

[This message has been edited by MstangsBware (edited 09-12-2011).]

Poe, I need the lower rubber plastic air dam and the stamped metal sheet it bolts too...

Mine (on yellow) met an... untimely <cough> demise <cough> last Friday.

Is it an auto?... If yes, I need the plastic rectangle the PRNDL leather boot is affixed to. That can come off any year automatic though...

Also might be interested in the gas tank.

------------------
<---- did you buy Cliff a beer?
......................................................www.northtexasfieroclub.org

[This message has been edited by blakeinspace (edited 09-12-2011).]

Hello. I'm looking for sunroof gasket tracks if they are not rusted shipped to 08055.

[This message has been edited by DLCLK87GT (edited 09-12-2011).]

Coolant tubes?

Interior color?

Looking for a Getrag with the shifter, cables, mounts, and clutch setup. All the things needed to change over from an Isuzu.

quote Originally posted by blakeinspace: Poe, I need the lower rubber plastic air dam and the stamped metal sheet it bolts too... Mine (on yellow) met an... untimely <cough> demise <cough> last Friday. Is it an auto?... If yes, I need the plastic rectangle the PRNDL leather boot is affixed to. That can come off any year automatic though... Also might be interested in the gas tank.

The car was swapped over to Aero panels but I think I found what you need the other day..Will look for the auto piece you need. I have a few tanks......Swapping a bigger tank into the 84?

quote Originally posted by MstangsBware: Will look for the auto piece you need. I have a few tanks......Swapping a bigger tank into the 84?

Thanks... I'd like to replace... I miss that extra 1.9 gallons or so!

Poe, ya want me to bring your V6 wiring harness North with us at the end of the month?
-Joe

quote Originally posted by josef644: Poe, ya want me to bring your V6 wiring harness North with us at the end of the month? -Joe

Yeah..that willl work....

If its a 4 cyl how much for the ECM Tray only? Zip 19320

Spoon

------------------
Two yeast spent their entire life "about 2 days" discussing what the purpose of life could be and not once did they even come close to the fact that they were making champagne. Quoted by: Unknown

I need a faceplate for the guage pod that houses the oil pressure guage

PM sent

All Pms replied too except for Spoon....Checking on part and will send a PM in a bit....

Are the rear spindles any good? Check your PMs

[This message has been edited by FieroReinke (edited 09-13-2011).]

I need only one of the rear adjustable suspension links. I have a set for a cradle swap but somehow the adjustable one got bent.

How much shipped to 98604?

Thanks

Headlight system to put in My 86?

quote Originally posted by Ratfink: Headlight system to put in My 86?

Do u want comlplete headlight buckets ready to install or just the Gen 2 motors? Also would come with harness and modules...Let me know and I can get you a price...

PM sent

If it has power mirrors I would be interested in the drivers side mirror.

quote Originally posted by roofus7044: If it has power mirrors I would be interested in the drivers side mirror.

$45 shipped for complete Drv side power mirror....

[This message has been edited by MstangsBware (edited 09-14-2011).]

PM sent

quote Originally posted by MstangsBware: Do u want comlplete headlight buckets ready to install or just the Gen 2 motors? Also would come with harness and modules...Let me know and I can get you a price...

PM sent!

quote Originally posted by Ratfink: PM sent!

Replied back to.......

Edit: If I have not replied to a request or PM let me know....

[This message has been edited by MstangsBware (edited 09-14-2011).]

I could use the fuel pump connector with 8" of harness from the chassis side (not pump side)
my clip is broke and nothing holds the connectors together.

quote Originally posted by Greenmeansgo: I could use the fuel pump connector with 8" of harness from the chassis side (not pump side) my clip is broke and nothing holds the connectors together.

This is common and hard to find a good conenctor....I usually use a zip zie to hold the two plugs together...Works with no issues....

Thats what I have done but if you got a good one ill take it

The grey plastic filler were the optional trunk light goes. I broke mine.

Do you have a good condition black deflector? (the black air dam under the nose on the coupe) PM me with a price shipped to 84092 please if you do.

PM Sent

quote Originally posted by solotwo: Good sunvisors in grey

Let me check.....

I need the "engine" (male) side C203 and C500 connectors. I am going to re-pin them to the 4.9 harness to make the engine plug-and-play (or pray as it were). Any chance you'd be willing to cut those off the existing harness for me?

Thanks!!!

Josh

I would love to take any of the little plastic mounts that hold the plug wires, throttle cable, etc to the sides of the valve cover.

quote Originally posted by jtsordel: I need the "engine" (male) side C203 and C500 connectors. I am going to re-pin them to the 4.9 harness to make the engine plug-and-play (or pray as it were). Any chance you'd be willing to cut those off the existing harness for me? Thanks!!! Josh

PM sent

Hey Stephen,

What color is the interior?

Pat