Up for grabs is a GA brake swap. You get turned hubs with longer lug studs pressed in, 4 rear GA rotors, 4 calipers with pads. Everything has been sitting on the patio so it has surface rust. You will need to install your own wheel bearings, I removed a brand new set of Timkens from these hubs to put into my stock rotors cause I needed to get my brakes on asap.







For some reason I couldn't get the passenger side to fit on my car. I measured every single part 2x and never had the time to figure it out and needed to get the car off the stands asap.

The rotors have no warping, no gauges. Pads are pretty much all there.

I'm estimating shipping at about $40, this stuff is really heavy and will need to go in 2 boxes. If its less I'll refund the difference. Looking for $140+ shipping.

[This message has been edited by nitroheadz28 (edited 10-09-2011).]

Bump. $120+ shipping.

just FYI, when i did my swap, i had to grind down these areas on the calipers in order for them to fit all the way down, otherwise they hit the caliper bracket and wont bolt on

[This message has been edited by GTFiero1 (edited 10-11-2011).]

I didn't have to grind those places...

quote Originally posted by L67: I didn't have to grind those places...

Nope, neither did I. I had to grind down the caliper bracket itself for the front, but that was it.

quote Originally posted by mattwa: Nope, neither did I. I had to grind down the caliper bracket itself for the front, but that was it.

Thats what I did.

PM Sent

------------------
Peace!!

B2 OUT!!
86GT 3.4LProject

Pm sent

Got the items yesterday. Everything looks great. Thank you!!