*SOLD*

NO SHIPPING!

I have for sale a spare Series-2 3800 Supercharged (L67) shortblock that I no longer have a need for. I bought this off of forum member BanditBalz as a complete engine awhile ago for my 3800sc project. Due to logistics, I ended up buying another engine and had it installed instead. Since I had had the engine, it has been covered, turned over every 1-2 months along with wiping a coat of oil to the cylinder walls. You can still see the cross-hatching and all of the pistons look consistent with no major carbon buildup.

If the buyer is interested, I also have a swath of other 3800 engine parts including 2 sets of l67 cylinder heads, exhaust manifolds and a lower intake and some other smaller stuff. All that stuff is included in the price and I'm not separating it. For and additional $50, I will include the engine stand as well.





Original receipt:


Pic of the extra parts:

------------------
'04 Mazda RX8 Build Thread
'88 GT- 3800 Turbo 11.367@121.03mph (Sold and gone now)
GM Tuners

[This message has been edited by AkursedX (edited 12-30-2011).]

Why does all the good stuff have to be over a thousand miles away??

Tempting. Ohhhhhhhh so tempting.

DF

quote Originally posted by nitroheadz28: Why does all the good stuff have to be over a thousand miles away??

Because 3800's don't exist in NY...

Nah I think it's GOD getting even, just what have you done lately. LOL Bob

quote Originally posted by L67: Because 3800's don't exist in NY...

Not really, I'd like to avoid junkyards cause the prices are insane here.. All the yards within 25 miles wanted over 600 for ecotecs when I was shopping around most with unknown mileage. I know different engine- still I'd like to find an engine from someone parting a car out.

http://longisland.craigslis.../pts/2682976788.html

Thats the only engine I've seen for private sale in the last few months within 150 miles.

(Sorry for the hijack)

[This message has been edited by nitroheadz28 (edited 12-12-2011).]

I would not suggest this for someone who is looking to start a 3800 swap as there is a bunch of missing pieces. You would have to spend a lot of time hunting down small parts and pieces to make this a complete engine that you would probably end up spending more money than you would just buying a full engine. But that's just my opinion.

But if you have a swapped Fiero already but are looking to build-up another engine on the side, or have a spare shortblock for the 'just in case' moments, this would be a nice piece to work with.

BUMP!

ow far from the border are you ??

quote Originally posted by RULOOKIN: ow far from the border are you ??

I'm about 20-minutes from the Ambassador Bridge in Detroit and about an hour from the Bluewater Bridge in Port Huron

------------------
'04 Mazda RX8 Build Thread
'88 GT- 3800 Turbo 11.367@121.03mph (Sold and gone now)
GM Tuners

Just a Thanks for the 88 cradle,

Vince

------------------
Snapperhead Productions - Used Fiero Parts
Mirror Stainless Door Sill Plates - Mirror Stainless Deck Lid Mirrors - Acrylic Hood & Trunk Mirrors
Vette Brake Swap Consentric Rings - Powder Coating Services.

Rides:
85 Fiero Gt, 86 Fiero GT " Snapperhead", 88 Formula --- 10 Camaro, 99 K2500 Suburban, 04 Trailblazer

Our Old Rides:
85 Honda Nighthawk S, Yamaha FZ600, 88 Yamaha FZR1000, Myers Manx, MG Midget, MGB, Lots of V-8 Pintos, Pinto Cruiser Wagon, 67 VW Bug, Toyota Cressida Wagon, 78 Mustang, 76 Mustang, 77 Vette, 67 Firebird, 87 Fiero GT, 88 Fiero Formula, 98 Grand AM, 96 Chevy K1500 Z71, 94 Z24, 94 Sunbird Convert, 93 Caravan, 91 Grand AM, 91 Dodge B250 Van, 91 Caravan, 90 Corsica, 82 Vette, 04 GTO, 04 Grand Prix.... I'm sure I've missed a few....

PM sent.

PM sent.

A guy came up today and picked up the engine along with all the other stuff today! SOLD.